TU LogoTechnische Universität Wien

Robert Liska

Univ.Prof. Dipl.-Ing. Dr.techn.



BC03A32 view map

+43 (1) 58801 - 163614
+43 (1) 58801 - 162 73
+43 (664) 605887124
robert.liska@tuwien.ac.at

 
Content goes here

CV

Robert Liska was born in 1969 in Vienna, Austria. He received his M.Sc. degree in 1995 and Ph.D. degree in 1998 from the Vienna University of Technology where he continued his academic career afterwards. In 2006, he got his habilitation in the field of macromolecular chemistry at the Institute of Applied Synthetic Chemistry. He is the leader of the research group ''Photopolymerization'' and his current research interests are in the field of photoinitiation, photopolymerization, 3D-printing, and biomedical polymers. He has co-authored 8 book chapters and published more than 120 papers in peer reviewed journals. Up to now more than 30 patent families have been filed. Since 2012 he is also the head of the Christian Doppler laboratory for digital and restorative dentistry and member of the Austrian Cluster for Tissue Regeneration.

Publications in Scientific Journals
S. Ligon, M. Schwentenwein, C. Gorsche, J. Stampfl, R. Liska:
"Toughening of photo-curable polymer networks: a review";
Polymer Chemistry, 7 (2016), S. 257 - 286.
P. Gauss, S. Ligon, M. Griesser, C. Gorsche, H. Svajdlenková, T. Koch, N. Moszner, R. Liska:
"The influence of vinyl activating groups on β-allyl sulfone based chain transfer agents for tough methacrylate networks";
Journal of Polymer Science Part A: Polymer Chemistry, early access online (2016).
S. Ligon, K. Seidler, C. Gorsche, M. Griesser, N. Moszner, R. Liska:
"Allyl sulfides and α-substituted acrylates as addition-fragmentation chain transfer agents for methacrylate polymer networks";
Journal of Polymer Science Part A: Polymer Chemistry, 53 (2016), 3; S. 394 - 406.
M. Turnsek, P. Krajnc, R. Liska, T. Koch:
"Macroporous alumina with cellular interconnected morphology from emulsion templated polymer composite precursors";
Journal of the European Ceramic Society, 36 (2016), S. 1045 - 1051.
C. Gorsche, K. Seidler, P. Knaack, P. Dorfinger, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Rapid formation of regulated methacrylate networks yielding tough materials for lithography-​based 3D printing";
Polymer Chemistry, 7 (2016), 11; S. 2009 - 2014.
D. Bomze, P. Knaack, R. Liska:
"Successful radical induced cationic frontal polymerization of epoxy-based monomers by C-C labile compounds";
Polymer Chemistry, 6 (2015), S. 8161 - 8167.
X.H. Qin, K. Labuda, J. Chen, V. Hruschka, A. Khadem, R. Liska, H. Redl, P. Slezak:
"Development of Synthetic Platelet-Activating Hydrogel Matrices to Induce Local Hemostasis";
Advanced Functional Materials, 25 (2015), S. 6606 - 6617.
A. Ajami, P. Gruber, M. Tromayer, W. Husinsky, J. Stampfl, R. Liska, A. Ovsianikov:
"Evidence of concentration dependence of the two-photon absorption cross section: Determining the ``true´´ cross section value";
Optical Materials, 47 (2015), S. 524 - 529.
J. Kreutzer, X.H. Qin, C. Gorsche, H. Peterlik, R. Liska, U. Schubert:
"Variation of the crosslinking density in cluster-reinforced polymers";
Materials Today Communications, 5 (2015), S. 10 - 17.
M. Markovic, J. Van Hoorick, K. Hölzl, M. Tromayer, P. Gruber, S. Nürnberger, P. Dubruel, S. Van Vlierberghe, R. Liska, A. Ovsianikov:
"Hybrid Tissue Engineering Scaffolds by Combination of Three-Dimensional Printing and Cell Photoencapsulation";
J. Nanotechnol. Eng. Med, 6 (2015), 2; S. 021001 - 021008.
P. Potzmann, F. Lopez Villanueva, R. Liska:
"UV-Initiated Bubble-Free Frontal Polymerization in Aqueous Conditions";
Macromolecules, 48 (2015), 24; S. 8738 - 8745.
S. Benedikt, J. Wang, M. Markovic, N. Moszner, K. Dietliker, A. Ovsianikov, H. Grützmacher, R. Liska:
"Highly efficient water-soluble visible light photoinitiators";
Journal of Polymer Science Part A: Polymer Chemistry, 53 (2015), 24.
C. Dworak, S. Ligon, R. Tiefenthaler, J. Lagref, R. Frantz, Z. Cherkaoui, R. Liska:
"Imidazole-based ionic liquids for free radical photopolymerization";
Designed Monomers and Polymers, 18 (2015), 3; S. 262 - 270.
S. Fröhlich, M. Eilenberg, A. Svirkova, C. Grasl, R. Liska, H. Bergmeister, M. Marchetti-Deschmann:
"Mass spectrometric imaging of in vivo protein and lipid adsorption on biodegradable vascular replacement systems";
Analyst, 140 (2015), 17; S. 6089 - 6099.
C. Gorsche, T. Koch, N. Moszner, R. Liska:
"Exploring the benefits of β-allyl sulfones for more homogeneous dimethacrylate photopolymer networks";
Polymer Chemistry, 6 (2015), S. 2038 - 2047.
G. Russmüller, R. Liska, J. Stampfl, C. Heller, A. Mautner et al.:
"3D Printable Biophotopolymers for in vivo Bone Regeneration";
Materials, 8 (2015), S. 3685 - 3700.
H. Bergmeister, N. Seyidova, C. Schreiber, M. Strobl, C. Grasl, I. Walter, B. Messner, S. Baudis, S. Fröhlich, M. Marchetti-Deschmann, M. Griesser, M. di Franco, M. Krssak, R. Liska, H. Schima:
"Biodegradable, thermoplastic polyurethane grafts for small diameter vascular replacements";
Acta Biomaterialia, 11 (2015), S. 104 - 113.
S. Ligon, B. Husar, H. Wutzel, R. Holman, R. Liska:
"Strategies to Reduce Oxygen Inhibition in Photoinduced Polymerization";
Chemical Reviews, 114 (2014), 1; S. 557 - 589.
A. Franz, T. Spinell, A. Graf, H. Wutzel, R. Liska, D. Watts, A. Moritz, A. Schedle:
"Cytotoxicity of post and core composites as a function of environmental conditions";
Dental Materials, 30 (2014), 10; S. 1179 - 1186.
R. Woods, S. Feldbacher, D. Zidar, G. Langer, V. Satzinger, V. Schmidt, N.U Pucher, R. Liska, W. Kern:
"3D optical waveguides produced by two photon photopolymerisation of a flexible silanol terminated polysiloxane containing acrylate functional groupsfunctional groups";
Optical Materials Express, 4 (2014), 3; S. 486 - 498.
C. Gorsche, M. Griesser, G. Gescheidt, N. Moszner, R. Liska:
"β‑Allyl Sulfones as Addition−Fragmentation Chain Transfer Reagents: A Tool for Adjusting Thermal and Mechanical Properties of Dimethacrylate Networks";
Macromolecules, 47 (2014), 21; S. 7327 - 7336.
P. Petrochenko, J. Torgersen, P. Gruber, L. Hicks, J. Zheng, G. Kumar, R. Narayan, P. Goering, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser 3D Printing with Sub‐Microscale Resolution of Porous Elastomeric Scaffolds for Supporting Human Bone Stem Cells";
Advanced Healthcare Materials, # (2014), #; S. #.
S. Rothemund, T. Aigner, I. Iturmendi, M. Rigau, B. Husar, F. Hildner, E. Oberbauer, M. Prambauer, G. Olawale, R. Forstner, R. Liska, K. Schröder, O. Brüggemann, I. Teasdale:
"Degradable Glycine-Based Photo- Polymerizable Polyphosphazenes for Use as Scaffolds for Tissue Regeneration";
Macromolecular Bioscience, (2014), S. 1 - 13.
S. Benedikt, N. Moszner, R. Liska:
"Benzoyl Phenyltelluride as Highly Reactive Visible-Light TERP-Reagent for Controlled Radical Polymerization";
Macromolecules, 47 (2014), S. 5526 - 5531.
X.H. Qin, P. Gruber, M. Markovic, B. Plochberger, E. Klotzsch, J. Stampfl, A. Ovsianikov, R. Liska:
"Enzymatic synthesis of hyaluronic acid vinyl esters for two-photon microfabrication of biocompatible and biodegradable hydrogel constructs";
Polymer Chemistry, 5 (2014), 22; S. 6523 - 6533.
B. Husar, S. Ligon, H. Wutzel, H. Hoffmann, R. Liska:
"The formulator´s guide to anti-oxygen inhibition additives";
Progress in Organic Coatings, 77 (2014), S. 1789 - 1798.
M. Susec, R. Liska, G. Russmüller, J. Kotek, P. Krajnc:
"Microcellular Open Porous Monoliths for Cell Growth by Thiol-Ene Polymerization of Low-Toxicity Monomers in High Internal Phase Emulsions";
Macromolecular Bioscience, (2014), S. 1 - 9.
C. Gorsche, M. Griesser, C. Hametner, B. Ganster, N. Moszner, D. Neshchadin, A. Rosspeintner, G. Gescheidt, R. Saf, R. Liska:
"New Generation of Highly Efficient, Long-Wavelength Photoinitiators for Dental Restoratives: From Research to Application";
RadTech Report, 4 (2014), S. 12 - 18.
X.H. Qin, A. Ovsianikov, J. Stampfl, R. Liska:
"Additive manufacturing of photosensitive hydrogels for tissue engineering applications";
BioNanoMaterials, 15 (2014), 3-4; S. 49 - 70.
J. Kupfmüller, K. Stadlmann, Z. Li, V. Satzinger, J. Stampfl, R. Liska:
"Flexible optical interconnects via thiol-ene two-photon-induced polymerization";
MRS Online Proceedings Library, 1438 Optical Interconnects (2013), S. 1438.
Z. Li, J. Torgersen, A. Ajami, S. Mühleder, X.H. Qin, W. Husinsky, W. Holnthoner, A. Ovsianikov, J. Stampfl, R. Liska:
"Initiation efficiency and cytotoxicity of novel water-soluble two-photon photoinitiators for direct 3D microfabrication of hydrogels";
RSC Advances, 36 (2013), S. 15939 - 15946.
Z. Li, E. Stankevičius, A. Ajami, G. Račiukaitis, W. Husinsky, A. Ovsianikov, J. Stampfl, R. Liska:
"3D alkyne-azide cycloaddition: spatiotemporally controlled by combination of aryl azide photochemistry and two-photon grafting";
Chemical Communications, 49 (2013), S. 7635 - 7637.
J. Kupfmüller, Z. Li, V. Satzinger, J. Stampfl, R. Liska:
"Two-photon-induced thiol-ene polymerization as a fabrication tool for flexible optical waveguides";
Designed Monomers and Polymers, (2013), S. 1 - 11.
M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Novel cross-linkers for asymmetric poly-AMPS-based proton exchange membranes for fuel cells";
Designed Monomers and Polymers, (2013), S. 1 - 8.
H. Bergmeister, M. Strobl, R. Liska, H. Schima:
"Tissue engineering of vascular grafts";
European Surgery, 45 (2013), S. 187 - 193.
L. Zhiquan, J. Torgersen, A. Ajami, S Mühleder, X.H. Qin, W. Husinsky, W Holnthoner, A. Ovsianikov, J. Stampfl, R. Liska:
"Initiation efficiency and cytotoxicity of novel water-soluble two-photon photoinitiators for direct 3D microfabrication of hydrogels";
RSC Advances, 3 (2013), 36; S. 15939 - 15946.
X.H. Qin, J. Torgersen, R. Saf, S Mühleder, N.U Pucher, S. Ligon, W Holnthoner, H. Redl, A. Ovsianikov, J. Stampfl, R. Liska:
"Three-dimensional microfabrication of protein hydrogels via two-photon-excited thiol-vinyl ester photopolymerization";
Journal of Polymer Science Part A: Polymer Chemistry, 51 (2013), S. 4799 - 4810.
D. Neshchadin, A. Rosspeintner, M. Griesser, B. Lang, S. Mosquera-Vazquez, E. Vauthey, V. Gorelik, R. Liska, C. Hametner, B. Ganster, R. Saf, N. Mozner, G. Gescheidt:
"Acylgermanes: Photoinitiators and Sources for Ge-Centered Radicals. Insights into their Reactivity";
Journal of the American Chemical Society, 135 (2013), 46; S. 17314 - 17321.
J. Torgersen, X.H. Qin, Z. Li, A. Ovsianikov, R. Liska, J. Stampfl:
"Hydrogels for Two-Photon Polymerization: A Toolbox for Mimicking the Extracellular Matrix";
Advanced Functional Materials, 10 (2013), 6.
Z. Li, N.U Pucher, K. Cicha, J. Torgersen, S. Ligon, A. Ajami, W. Husinsky, A. Rosspeintner, E. Vauthey, S. Naumov, T. Scherzer, J. Stampfl, R. Liska:
"Straightforward Synthesis and Structure-Activity Relationship of Highly Efficient Initiators for Two-Photon Polymerization";
Macromolecules, 46 (2013), 2; S. 352 - 361.
Z. Li, A. Ajami, E. Stankevičius, W. Husinsky, G. Račiukaitis, J. Stampfl, R. Liska, A. Ovsianikov:
"3D photografting with aromatic azides: A comparison between three-photon and two-photon case";
Optical Materials, 35 (2013), S. 1846 - 1851.
P. Esfandiari, S. Ligon, J. Lagref, R. Frantz, Z. Cherkaoui, R. Liska:
"Efficient Stabilization of Thiol-ene Formulations in Radical Photopolymerization";
Journal of Polymer Science Part A: Polymer Chemistry, 51 (2013), S. 4261 - 4266.
X.H. Qin, J. Torgersen, R. Saf, S. Mühleder, N.U Pucher, S. Ligon, W. Holnthoner, H. Redl, A. Ovsianikov, J. Stampfl, R. Liska:
"Three-Dimensional Microfabrication of Protein Hydrogels via Two-Photon-Excited Thiol-Vinyl Ester Photopolymerization";
Journal of Polymer Science Part A: Polymer Chemistry, 51 (2013), S. 4799 - 4810.
L. Zhiquan, E. Stankevičius, A. Ajami, G. Račiukaitis, W. Husinsky, A. Ovsianikov, J. Stampfl, R. Liska:
"spatiotemporally controlled by combination of aryl azide photochemistry and two-photon grafting";
Chemical Communications, 49 (2013), 69; S. 7635 - 7641.
A. Ajami, Z. Li, E. Stankevičius, G. Račiukaitis, W. Husinsky, J. Stampfl, R. Liska, A. Ovsianikov:
"3D photografting with aromatic azides: A comparison between three-photon and two-photon case";
Optical Materials, 35 (2013), 10; S. 1846 - 1851.
P. Radovanovic, M. Kellner, J. Matovic, R. Liska, T. Koch:
"Asymmetric membranes with interpenetrating proton-conducting morphology made by a combination of immersion precipitation and photopolymerization";
Journal of Membrane Science, 401-402 (2012), S. 254 - 261.
A. Ovsianikov, V. Mironov, J. Stampfl, R. Liska:
"Engineering 3D cell-culture matrices: multiphoton processing technologies for biological and tissue engineering applications";
Expert Review of Medical Devices (eingeladen), 9 (2012), 6; S. 613 - 633.
B. Husar, A. Mautner, C. Heller, M. Schwentenwein, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Utilization of photopolymerization of new low toxic vinyl monomers in bone tissue engineering";
Journal of Tissue Engineering and Regenerative Medicine, 6/Supplement s1/ (2012), S. 370.
J. Torgersen, A. Ovsianikov, V. Mironov, N.U Pucher, X.H. Qin, Z. Li, K. Cicha, T. Machacek, V. Jantsch-Plunger, R. Liska, J. Stampfl:
"Photo-sensitive hydrogels for threedimensional laser microfabrication in the presence of whole organisms";
Journal of Biomedical Optics, 17 (2012), 10; S. 1 - 10.
H. Bergmeister, C. Grasl, M. Stoiber, C. Schreiber, N. Seyidova, I. Walter, D. Bernhard, S. Ligon, R. Liska, H. Schima:
"Healing characteristics of nanostructured, bioresorbable vascular substitutes";
Journal of Tissue Engineering and Regenerative Medicine, 6 (2012), Supplement 1; S. 148.
A. Ovsianikov, Z. Li, A. Ajami, J. Torgersen, W. Husinsky, J. Stampfl, R. Liska:
"3D grafting via three-photon induced photolysis of aromatic azides";
Applied Physics A: Materials Science & Processing, 108 (2012), 1; S. 29 - 34.
M. Griesser, A. Rosspeintner, C. Dworak, M. Höfer, R. Liska, G. Gescheidt:
"Initiators Based on Benzaldoximes: Bimolecular and Covalently Bound Systems";
Macromolecules, 45 (2012), 21; S. 8648 - 8657.
M. Griesser, C. Dworak, S. Jauk, M. Höfer, A. Rosspeintner, G. Grabner, R. Liska, G. Gescheidt:
"Photoinitiators with β-Phenylogous Cleavage: An Evaluation of Reaction Mechanisms and Performance";
Macromolecules, 45 (2012), 4; S. 1737 - 1745.
S. Ligon, S. Baudis, F. Nehl, H. Bergmeister, A. Nigisch, J. Stampfl, R. Liska, B. Husar:
"Improved elastomeric materials for CAD/CAM generation of vascular structures in soft tissue replacement therapies";
Journal of Tissue Engineering and Regenerative Medicine, 6 (2012), Supplement 1; S. 301.
S. Baudis, S. Ligon, K. Seidler, G. Weigel, C. Grasl, H. Bergmeister, H. Schima, R. Liska:
"Hard-Block Degradable Thermoplastic Urethane-Elastomers for Electrospun Vascular Prostheses";
Journal of Polymer Science Part A: Polymer Chemistry, 50 (2012), 7; S. 1272 - 1280.
B. Husar, R. Liska:
"Vinyl carbonates, vinyl carbamates, and related monomers: synthesis, polymerization, and application";
Chemical Society Reviews, 41 (2012), S. 2395 - 2405.
R. Felzmann, S. Gruber, G. Mitteramskogler, P. Tesavibul, A. Boccaccini, R. Liska, J. Stampfl:
"Lithography-based Additive Manufacturing of Cellular Ceramic Structures";
Advanced Engineering Materials, 14 (2012), S. 1052 - 1058.
K. Cicha, T. Koch, J. Torgersen, L. Zhiquan, R. Liska, J. Stampfl:
"Young´s modulus measurement of two-photon polymerized microcantilevers by using nanoindentation equipment";
Journal of Applied Physics, 112 (2012), 094906.
C. Schreiber, N. Seyidova, S. Baudis, C. Grasl, I. Walter, D. Bernhard, R. Liska, H. Schima, H. Bergmeister:
"Long term evaluation of a new synthetic degradable small diameter vascular graft";
European Surgery, 44 (2012), Supplement 245/12; S. 16.
A. Ovsianikov, Z. Li, J. Torgersen, J. Stampfl, R. Liska:
"Selective Functionalization of 3D Matrices Via Multiphoton Grafting and Subsequent Click Chemsitry";
Advanced Functional Materials, 22 (2012), 16; S. 3429 - 3433.
C. Schreiber, N. Seyidova, S. Baudis, C. Grasl, M. Stoiber, R. Liska, H. Schima, H. Bergmeister:
"Long-term performance of small diameter vessel grafts";
European Surgery, 44 (2012), Supplement 244/12; S. 7.
P. Tesavibul, R. Felzmann, S. Gruber, R. Liska, I. Thompson, A. Boccaccini, J. Stampfl:
"Processing of 45S5 Bioglass by lithography-based additive manufacturing";
Materials Letters, 74 (2012), S. 81 - 84.
A. Mautner, X.H. Qin, H. Wutzel, B. Kapeller, D. Moser, G. Russmüller, J. Stampfl, R. Liska:
"Thiol-Ene Photopolymerization for Efficient Curing of Vinyl Esters";
Journal of Polymer Science Part A: Polymer Chemistry, 51 (2012), 1; S. 203 - 212.
A. Mautner, X.H. Qin, B. Kapeller, G. Russmüller, T. Koch, J. Stampfl, R. Liska:
"Efficient Curing of Vinyl Carbonates by Thiol-Ene Polymerization";
Macromolecular Rapid Communications, 33 (2012), 23; S. 2046 - 2052.
C. Schreiber, S. Baudis, C. Grasl, M. Stoiber, I. Walter, R. Plasenzotti, D. Bernhard, R. Liska, H. Schima, H. Bergmeister:
"In-vivo evaluation of biodegradable and non-degradable elastomeric vascular grafts";
European Surgery, 43 (2011), Supplement 243/11; S. 23.
B. Husar, C. Heller, M. Schwentenwein, A. Mautner, F. Varga, T. Koch, J. Stampfl, R. Liska:
"Biomaterials Based on Low Cytotoxic Vinyl Esters for Bone Replacement Application";
Journal of Polymer Science Part A: Polymer Chemistry, 49 (2011), S. 4927 - 4934.
J. Kumpfmüller, K. Stadlmann, V. Satzinger, L. Zhiquan, J. Stampfl, R. Liska:
"Two-photon-induced Microfabrication of Flexible Optical Waveguides";
Journal of Laser Micro Nanoengineering, 6 (2011), 3; S. 195 - 198.
R. Liska:
"Book Review: "Industrial Photoinitiators: A Technical Guide"";
ChemPhysChem (eingeladen), 6 (2011), S. 1389.
K. Cicha, Z. Li, K. Stadlmann, A. Ovsianikov, R. Markut-Kohl, R. Liska, J. Stampfl:
"Evaluation of 3D structures fabricated with two-photon-photopolymerization by using FTIR spectroscopy";
Journal of Applied Physics, 110 (2011), 064911; S. 1 - 5.
C. Heller, M. Schwentenwein, G. Russmüller, T. Koch, D. Moser, C. Schopper, F. Varga, J. Stampfl, R. Liska:
"Vinylcarbonates and Vinylcarbamates: Biocompatible Monomers for Radical Photopolymerization";
Journal of Polymer Science Part A: Polymer Chemistry, 49 (2011), 3; S. 650 - 661.
H. Bergmeister, S. Baudis, C. Grasl, M. Stoiber, C. Schreiber, I. Walter, R. Plasenzotti, R. Liska, H. Schima:
"In vivo evaluation of electrospun, biodegradable and non-degradable elastomeric vascular grafts";
International Journal of Artificial Organs, 34 (2011), 8; S. 641.
A. Gugg, C. Gorsche, N. Moszner, R. Liska:
"Frontal Polymerization: Polymerization Induced Destabilization of Peracrylates";
Macromolecular Rapid Communications, 32 (2011), S. 1096 - 1100.
S. Baudis, F. Nehl, S. Ligon, A. Nigisch, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Elastomeric degradable biomaterials by photopolymerization-based CAD-CAM for vascular tissue engineering";
Biomedical Materials, 6 (2011), 5.
Z. Li, M. Siklos, N.U Pucher, K. Cicha, A. Ajami, W. Husinsky, A. Rosspeintner, E. Vauthey, G. Gscheidt, J. Stampfl, R. Liska:
"Synthesis and Structure-Activity Relationship of Several Aromatic Ketone-Based Two-Photon Initiators";
Journal of Polymer Science Part A: Polymer Chemistry, 49 (2011), S. 3688 - 3699.
C. Dworak, R. Liska:
"Alternative Initiators for Bimolecular Photoinitiating Systems";
Journal of Polymer Science Part A: Polymer Chemistry, 48 (2010), S. 5865 - 5871.
F. Karasu, D. Balta, R. Liska, N. Arsu:
"Photoinitiated polymerization of β-cyclodextrin/methyl methacrylate host/guest complex in the presence of water soluble photoinitiator, thioxanthone-catechol-O,O\'-diacetic acid";
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 68 (2010), 1-2; S. 147 - 153.
C. Dworak, T. Koch, F. Varga, R. Liska:
"Photopolymerization of biocompatible Phosphorus-containing Vinyl esters and Vinyl carbamates";
Journal of Polymer Science Part A: Polymer Chemistry, 13 (2010), 48; S. 2916 - 2924.
S. Baudis, B. Steyrer, T. Pulka, H. Wilhelm, G. Weigel, H. Bergmeister, J. Stampfl, R. Liska:
"Photopolymerizable Elastomers for Vascular Tissue Regeneration";
Macromolecular Symposia, 296 (2010), 1; S. 121 - 126.
N. Moszner, I. Lamparth, J. Angermann, U. Fischer, F. Zeuner, T. Bock, R. Liska, V. Rheinberger:
"Synthesis of bis(3-{[2-(allyloxy)ethoxy]methyl}-2,4,6-trimethylbenzoyl)(phenyl)phosphine oxide - a tailor-made photoinitiator for dental adhesives";
Beilstein Journal of Organic Chemistry, 26 (2010), 6; S. 1 - 9.
N.U Pucher, M. Siklos, A. Rosspeintner, A. Ajami, K. Cicha, G. Gscheidt, W. Husinsky, J. Stampfl, R. Liska:
"Optimization of feature resolution, processing window & structuring time for the two-photon polymerization (2PP) process by the use of novel initiators";
Proc. of LPM2010 - the 11th International Symposium on Laser Precision Microfabrication, - (2010), S. 1 - 6.
S. Krivec, N. Matsko, V. Satzinger, N.U Pucher, N. Galler, T. Koch, V. Schmidt, W. Grogger, R. Liska, H. Lichtenegger:
"Silica-Based, Organically Modified Host Material for Waveguide Structuring by Two-Photon-Induced Photopolymerization";
Advanced Functional Materials, 20 (2010), S. 1 - 9.
N.U Pucher, A. Rosspeintner, V. Satzinger, V. Schmidt, G. Gescheidt, J. Stampfl, R. Liska:
"Structure-Activity Relationship in D-π-A-π-D-Based Photoinitiators for the Two-Photon-Induced Photopolymerization Process";
Macromolecules, 42 (2009), S. 6519 - 6528.
C. Dworak, S. Kopeinig, H. Hoffmann, R. Liska:
"Photoinitiating monomers based on di- and triacryloylated hydroxylamine derivatives";
Journal of Polymer Science Part A: Polymer Chemistry, 47 (2009), 2; S. 392 - 403.
M. Griesser, D. Neshchadin, K. Dietliker, N. Moszner, R. Liska:
"Decisive Reaction Steps at Initial Stages of Photoinitiated Radical Polymerizations";
Angewandte Chemie - International Edition, 48 (2009), S. 9359 - 9361.
C. Heller, M. Schwentenwein, G. Russmüller, F. Varga, J. Stampfl, R. Liska:
"Vinyl Esters: Low Cytotoxicity Monomers for the Fabrication of Biocompatible 3D Scaffolds by Lithography Based Additive Manufacturing";
Journal of Polymer Science Part A: Polymer Chemistry, 47 (2009), S. 6941 - 6954.
S. Baudis, C. Heller, R. Liska, J. Stampfl, H. Bergmeister, G. Weigel:
"(Meth)acrylate-based photoelastomers as tailored biomaterials for artificial vascular grafts";
Journal of Polymer Science Part A: Polymer Chemistry, 47 (2009), 10; S. 2664 - 2676.
A. Rosspeintner, M. Griesser, N.U Pucher, K. Iskra, R. Liska, G. Gescheidt:
"Toward the Photoinduced Reactivity of 1,5-Diphenylpenta-1,4-diyn-3-one (DPD): Real-Time Investigations by Magnetic Resonance";
Macromolecules, 42 (2009), S. 8034 - 8038.
M. Schuster, C. Turecek, G. Weigel, R. Saf, J. Stampfl, F. Varga, R. Liska:
"Gelatin-Based Photopolymers for Bone Replacement Materials";
Journal of Polymer Science Part A: Polymer Chemistry, 47 (2009), S. 7078 - 7089.
A. Ajami, M. Rafique, N.U Pucher, S. Bashir, W. Husinsky, R. Liska, R. Inführ, H. Lichtenegger, J. Stampfl, S. Lüftenegger:
"Z-scan measurements of two-photon absorption for ultrashort laser radiation";
Proc. SPIE-International Society for Optical Engineering, 7027 (2008), 70271H; S. 1 - 8.
M. Höfer, N. Moszner, R. Liska:
"Oxygen scavengers and sensitizers for reduced oxygen inhibition in radical photopolymerization";
Journal of Polymer Science Part A: Polymer Chemistry, 46 (2008), 20; S. 6916 - 6927.
M. Sandholzer, M. Schuster, F. Varga, R. Liska, C. Slugovc:
"ROMP based photoinitiator-coinitiator systems with improved migration sta";
Journal of Polymer Science Part A: Polymer Chemistry, 11 (2008), 46; S. 3648 - 3661.
M. Höfer, R. Liska:
"Photochemistry and Initiation Behavior of Phenylethynyl Onium Salts as Cationic Photoinitiators";
Journal of Polymer Science Part A: Polymer Chemistry, 46 (2008), S. 6916 - 6927.
B. Ganster, U. Fischer, N. Moszner, R. Liska:
"New Photocleavable Structures. V. Diacylgermane Based Photoinitiators for Visible Light Curing";
Macromolecules, 7 (2008), 41; S. 2394 - 2400.
F. Karasu, C. Dworak, S. Kopeinig, E. Hummer, N. Arsu, R. Liska:
"Photoinitiating Monomers Based on Diacrylamides";
Macromolecules, 41 (2008), 21; S. 7953 - 7958.
S. Jauk, R. Liska:
"Photoinitiators with Functional Groups 9: New Derivatives of Covalently Linked Benzophenone-amine Based Photoinitiators";
Journal of Macromolecular Science Part A - Pure and Applied Chemistry, 45 (2008), 10; S. 804 - 810.
J. Stampfl, S. Baudis, C. Heller, R. Liska, A. Neumeister, R. Kling, A. Ostendorf, M. Spitzbart:
"Photopolymers with tunable mechanical properties processed by laser based high-resolution stereolithography";
Journal of Micromechanics and Microengineering, 18 (2008), 125014.
N. Moszner, U. Fischer, B. Ganster, R. Liska, V. Rheinberger:
"Benzoyl germanium derivatives as novel visible light photoinitiators for dental materials";
Dental Materials, 7 (2008), 24; S. 901 - 907.
B. Seidl, K. Kalinyaprak-Icten, N. Fuß, M. Höfer, R. Liska:
"Photoinitiators with Double and Triple Bonds";
Journal of Polymer Science Part A: Polymer Chemistry, 46 (2008), S. 289 - 301.
M. Schuster, C. Turecek, F. Varga, H. Lichtenegger, J. Stampfl, R. Liska:
"3D-shaping of biodegradable photopolymers for hard tissue replacement";
Applied Surface Science, 254 (2007), S. 1131 - 1134.
C. Heller, N.U Pucher, B. Seidl, K. Kalinyaprak-Icten, G. Ullrich, L. Kuna, V. Satzinger, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"One- and two-photon activity of cross-conjugated photoinitiators with bathochromic shift";
Journal of Polymer Science Part A: Polymer Chemistry, 45 (2007), S. 3280 - 3291.
B. Ganster, U. Fischer, N. Moszner, R. Liska:
"New Photocleavable Structures, 4a Acylgerman-Based Photoinitiator for Visible Light Curing";
Macromolecular Rapid Communications, 29 (2007), S. 57 - 62.
B. Seidl, R. Liska:
"Mechanistic investigations on a diynone type photoinitiator";
Macromolecular Chemistry and Physics, 208 (2007), 1; S. 44 - 54.
R. Liska, M. Schuster, R. Inführ, C. Turecek, C. Fritscher, B. Seidl, V. Schmidt, L. Kuna, A. Haase, F. Varga, H. Lichtenegger, J. Stampfl:
"Photopolymers for rapid prototyping";
Journal of Coating Technology and Research, 4 (2007), 4; S. 505 - 510.
M. Sandholzer, M. Schuster, R. Liska, C. Turecek, F. Varga, F. Stelzer, C. Slugovc:
"Ring opening metathesis polymers as macroinitiator-coinitiator systems for the photopolymerization of acrylates";
Polymer Preprints, 48 (2007), S. 925 - 926.
R. Inführ, N. Pucher, C. Heller, H. Lichtenegger, R. Liska, V. Schmidt, L. Kuna, A. Haase, J. Stampfl:
"Functional polymers by two-photon 3D lithography";
Applied Surface Science, 254 (2007), 4; S. 836 - 840.
M. Schuster, C. Turecek, B. Kaiser, J. Stampfl, R. Liska, F. Varga:
"Evaluation of Biocompatible Photopolymers I: Photoreactivity and Mechanical Properties of Reactive Diluents";
Journal of Macromolecular Science Part A - Pure and Applied Chemistry, 44 (2007), 5; S. 547 - 557.
M. Schuster, C. Turecek, A. Mateos, J. Stampfl, R. Liska, F. Varga:
"Evaluation of Biocompatible Photopolymers II: Further Reactive Diluents";
Monatshefte für Chemie, 138 (2007), 4; S. 261 - 268.
G. Ullrich, P. Burtscher, U. Salz, N. Moszner, R. Liska:
"Phenylglycine Derivatives as Coinitiators for the Radical Photopolymerization of Acidic Aqueous Formulations";
Journal of Polymer Science Part A: Polymer Chemistry, 44 (2006), S. 115 - 125.
B. Seidl, R. Liska, G. Grabner:
"New photocleavable structures III. Photochemistry and photophysics of pyridinol and benzoyl-based photoinitiators";
Journal of Photochemistry and Photobiology A - Chemistry, 180 (2006), S. 109 - 117.
T. Verdianz, H. Simbürger, R. Liska:
"Surface modification of imide containing polymers II: Co-rective groups";
European Polymer Journal, 42 (2006), S. 869 - 882.
G. Ullrich, B. Ganster, U. Salz, N. Moszner, R. Liska:
"Photoinitiators With Functional Groups. IX. Hydrophylic Bisacylphosphine Oxides for Acidic Aqueous Formulations";
Journal of Polymer Science Part A: Polymer Chemistry, 44 (2006), S. 1686 - 1700.
C. Turecek, M. Schuster, F. Varga, R. Liska, B. Kaiser, J. Stampfl, K. Klaushofer:
"Evaluation and influence of photopolymers, capable for rapid prototyping on proliferation and morphologiy of osteoblasts";
Calcified Tissue International, 78 (2006), S. 71 P127.
M. Schuster, R. Inführ, C. Turecek, J. Stampfl, A. Varga, R. Liska:
"Photopolymers for Rapid Prototyping of Soluble Mold Materials and Molding of Cellular Biomaterials";
Monatshefte für Chemie, 137 (2006), S. 843 - 853.
T. Verdianz, H. Simbürger, R. Liska:
"Surface modification of imide containing polymers I: Catalytic groups";
European Polymer Journal, 42 (2006), S. 638 - 654.
R. Liska, B. Seidl:
"1,5-Diphenyl-1,4-diyn-3-one: A Highly Efficient Photoinitiator";
Journal of Polymer Science Part A: Polymer Chemistry, 43 (2005), S. 101 - 111.
R. Liska, F. Schwager, R. Cano Vives, C. Maier, J. Stampfl:
"Water-soluble photopolymers for rapid prototyping of cellular materials";
Journal of Applied Polymer Science, 97 (2005), S. 2286 - 2298.
S. Jauk, R. Liska:
"Photoinitiators with Functional Groups, 8a - Benzophenone with Covalently Bound Phenylglycine";
Macromolecular Rapid Communications, 26 (2005), S. 1687 - 1692.
S. Knaus, L. Spoljaric-Lukacic, R. Liska, R. Saf:
"Peroxide-initiated grafting of maleimides onto hydrocarbon substrates";
European Polymer Journal, 41 (2005), S. 2240 - 2254.
J. Stampfl, R. Liska:
"New materials for rapid prototyping applications";
Macromolecular Chemistry and Physics, 206 (2005), S. 1253 - 1256.
J. Stampfl, H. Fouad, S. Seidler, R. Liska, F. Schwager, A. Woesz, P. Fratzl:
"Fabrication and moulding of cellular materials by rapid prototyping";
International Journal of Materials and Product Technology, 21 (2004), 4; S. 285 - 296.
R. Liska, D. Herzog:
"New Photocleavable Structures: II. alpha-Cleavable Photoinitiators Based on Pyridines";
Journal of Polymer Science Part A: Polymer Chemistry, 42 (2004), S. 752 - 764.
J. Stampfl, A. Wöß, S. Seidler, H. Fouad, A. Pisaipan, F. Schwager, R. Liska:
"Water Soluble, Photocurable Resins for Rapid Prototyping Applications";
Macromolecular Symposia, 217 (2004), 1; S. 99 - 107.
R. Liska, G. Ullrich, D. Herzog, P. Burtscher, N. Moszner:
"Activated camphorquinones as photoinitiators";
Polymer Preprints, 45 (2004), S. 69 - 70.
R. Liska, B. Seidl, G. Grabner:
"Laser flash photolysis investigations of pyridine ketones";
Polymer Preprints, 45 (2004), S. 75 - 76.
R. Liska:
"Photoinitiators with Functional Groups. VI. Chemically Bound Sensitizers";
Journal of Polymer Science Part A: Polymer Chemistry, 42 (2004), S. 2285 - 2301.
R. Liska, F. Schwager, R. Cano Vives, J. Stampfl:
"New photopolymers for rapid prototyping of cellular structures";
Polymer Preprints, 45 (2004), S. 77 - 78.
R. Liska, B. Seidl:
"1,5-diphenyl-1,4-diyn-3-one, a new and highly efficient photoinitiator";
Polymer Preprints, 45 (2004), S. 31 - 32.
G. Ullrich, D. Herzog, R. Liska, P. Burtscher, N. Moszner:
"Photoinitiators with Functional Groups. VII. Covalently Bonded Camphorquinone-Amines";
Journal of Polymer Science Part A: Polymer Chemistry, 42 (2004), S. 4948 - 4963.
R. Liska:
"Photoinitiators with functional groups: V. New water-soluble photoinitiators containing carbohydrate residues and copolymerizable derivates thereof";
Journal of Polymer Science Part A: Polymer Chemistry, 40 (2002), S. 1504 - 1518.
P. Sulek, S. Knaus, R. Liska:
"Grafting of Functional Maleimides onto Oligo- and Polyolefines";
Macromolecular Symposia, 176 (2001), S. 155 - 165.
R. Liska:
"New photocleavable structures I: Synthesis of hydroxyalkylphenone analogues electron-rich heterocycles";
Heterocycles, 55 (2001), S. 1475 - 1486.
Contributions to CD- or Online-journals
A. Ovsianikov, S Mühleder, J. Torgersen, X.H. Qin, L. Zhiquan, S. Van Vlierberghe, P. Dubruel, W Holnthoner, H. Redl, R. Liska, J. Stampfl:
"Laser Photofabrication of Cell-Containing Hydrogel Constructs";
Langmuir, 30 (2014), 13; 7 S.
J. Torgersen, X.H. Qin, L. Zhiquan, A. Ovsianikov, R. Liska, J. Stampfl:
"Hydrogels for Two-Photon Polymerization: A Toolbox for Mimicking the Extracellular Matrix";
Advanced Functional Materials, 23 (2013), 36; 4542 S.
Contributions to Books
B. Husar, M. Hatzenbichler, V. Mironov, R. Liska, J. Stampfl, A. Ovsianikov:
"Photopolymerization-based additive manufacturing for the development of 3D porous scaffolds";
in: "Biomaterials for Bone Regeneration", herausgegeben von: P. Dubruel and S. V. Vlierberghe; Elsevier Science Ltd., 2014, ISBN: 978-0-85709-804-7, S. 149 - 201.
J. Stampfl, R. Liska:
"Polymerizable Hydrogels for Rapid Prototyping: Chemistry, Photolithography, and Mechanical Properties";
in: "Stereolithography", P. Bartolo (Hrg.); Springer-Verlag, New York, 2011, ISBN: 978-0-387-92903-3, S. 161 - 182.
J. Stampfl, H. E. Pettermann, R. Liska:
"Bioinspired Cellular Structures: Additive Manufacturing and Mechanical Properties";
in: "Biomimetics - Materials, Structures and Processes", P. Gruber, D. Bruckner, Ch. Hellmich, H. Schmiedmayer, H. Stachelberger, I. Gebeshuber (Hrg.); Springer-Verlag, Berlin, 2011, ISBN: 978-3642119330, S. 105 - 123.
R. Liska, J. Stampfl:
"Photopolymers for rapid prototyping";
in: "Basics and Applications of Photopolymerization Reactions", J.P. Fouassier, X. Allonas (Hrg.); Research Signpost, Kerala, India, 2010, ISBN: 978-81-308-0430-9, S. 147 - 173.
N. Moszner, R. Liska:
"Photoinitiators for direct adhesive restorative materials";
in: "Basics and Applications of Photopolymerization Reactions", J.P. Fouassier, X. Allonas (Hrg.); Research Signpost, Kerala, India, 2010, ISBN: 978-81-308-0430-9, S. 91 - 112.
R. Liska, M. Schuster:
"Biocompatible Photopolymers";
in: "Basics and Applications of Photopolymerization Reactions", J.P. Fouassier, X. Allonas (Hrg.); Research Signpost, Kerala, India, 2010, ISBN: 978-81-308-0430-9, S. 77 - 91.
R. Liska:
"New chromophores for photoinitiators";
in: "Photochemistry and UV Curing: New Trends", herausgegeben von: J.P. Fouassier; Research Signpost, Trivandrum - 695023, Kerala, India, 2006, ISBN: 81-308-0014-4, S. 55 - 67.
Contributions to Proceedings
R. Liska, M. Schuster, B. Seidl, R. Inführ, C. Fritscher, J. Stampfl, H. Lichtenegger, C. Turecek, F. Varga, V. Schmidt, L. Kuna, A. Haase:
"New Photopolymers for Rapid Prototyping";
in: "Radcure Coatings and Inks: Cost & Performance", PRA Coatings Technology Centre, Hamton, Middlesex, UK, 2006, ISBN: 0-9551317-3-1, S. 1 - 8.
G. Ullrich, R. Liska, P. Burtscher, U. Salz, N. Moszner:
"Investigation of Phenylglycine Derivatives as Coinitiators";
in: "RadTech Europe 2005 Conference Proceedings Volume II", Rad Tech Europe Association, 2005, ISBN: 3-87870-330-9, S. 415 - 422.
G. Ullrich, S. Jauk, R. Liska:
"How to Avoid the Back Electron Transfer in Type II Photoinitiators";
in: "RadTech Europe 2005 Conference Proceedings Volume II", Rad Tech Europe Association, 2005, ISBN: 3-87870-330-9, S. 407 - 414.
B. Seidl, R. Liska:
"2-tert-Butylacrylonitrile, a Non-Polymerizable Monomere for the Investigation of Initiation Mechanism";
in: "RadTech Europe 2005 Conference Proceedings Volume II", Rad Tech Europe Association, 2005, ISBN: 3-87870-330-9, S. 391 - 398.
B. Seidl, K. Kalinyaprak-Icten, G. Ullrich, R. Liska:
"New Cross-Conjugated Photoinitiators";
in: "RadTech Europe 2005 Conference Proceedings Volume II", Rad Tech Europe Association, 2005, ISBN: 3-87870-330-9, S. 399 - 406.
R. Inführ, R. Liska, H. Lichtenegger, Ch. Fritscher, J. Stampfl, N. Hüsing:
"3D Lithography of Organo-Soluble Mold Materials for Sol-Gel Nanocomposites";
in: "RadTech Europe 2005 Conference Proceedings Volume II", Rad Tech Europe Association, 2005, ISBN: 3-87870-330-9, S. 487 - 494.
S. Kopeinig, R. Liska:
"Further Covalently Bonded Photoinitiators";
in: "RadTech Europe 2005 Conference Proceedings Volume II", Rad Tech Europe Association, 2005, ISBN: 3-87870-330-9, S. 373 - 381.
B. Seidl, K. Kalinyaprak-Icten, R. Liska:
"New Insights into 1,5-Diphenyl 1,4-Diynone as Photoinitiator";
in: "RadTech Europe 2005 Conference Proceedings Volume II", Rad Tech Europe Association, 2005, ISBN: 3-87870-330-9, S. 57 - 65.
Poster Presentation (Proceedings published as CD or Online)
M. Tromayer, Z. Li, J. Torgersen, A. Ajami, A. Rosspeintner, S. Naumov, R. Liska:
"Preparation and characterization of novel type I/ type II photoinitiators for two-photon submicro-stereolithography";
Poster: Austrian - Slovenian Polymer Meeting - ASPM 2013, Bled; 03.05.2013 - 05.05.2013; in: "The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013", M. Zigon, T. Rajsp (Hrg.); (2013), 978­‐961­‐269­‐992­‐5; 307 S.
M. Susec, R. Liska, P. Krajnc:
"Thiol-ene chemistry and emulsion templating for microcellular open porous polymer preparation";
Poster: Austrian - Slovenian Polymer Meeting - ASPM 2013, Bled; 03.05.2013 - 05.05.2013; in: "The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013", M. Zigon, T. Rajsp (Hrg.); (2013), 978­‐961­‐269­‐992­‐5; 307 S.
A. Gugg, B. Ganster, N. Moszner, R. Liska:
"Investigations on Acylsilanes as Photoinitiator for Radical Polymerization";
Poster: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 8 S.
S. Kopeinig, H. Gruber, E. Hummer-Koppendorfer, R. Liska:
"New Monomers for radiation curable formulations";
Poster: RadTech Europe 2007, Vienna, A; 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings", (2007), 7 S.
M. Höfer, C. Heller, R. Liska:
"New Sulfonium Salt based Photoinitiators for Cationic Photopolymerization";
Poster: RadTech Europe 2007, Vienna, A; 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings", (2007), 7 S.
S. Baudis, M. Schuster, C. Heller, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"Flexible, biocompatible Photopolymers as Synthetic Vascular Replacement Materials";
Poster: RadTech Europe 2007 - Europe´s event for UV/EB curing, Vienna 13-15 Nov 2007, Wien; 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 - Conference Proceedings", (2007), 6 S.
N. Pucher, C. Heller, B. Seidl, R. Inführ, L. Kuna, A. Haase, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"Two Photon Initiated Polymerization by Inones";
Poster: RadTech Europe 2007 - Europe´s event for UV/EB curing, Vienna 13-15 Nov 2007, Wien; 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 - Conference Proceedings", (2007), 7 S.
S. Kopeinig, H. Gruber, E. Hummer-Koppendorfer, R. Liska:
"Photopolymerization of Silicone Acrylamides and Acrylates";
Poster: RadTech Europe 2007, Vienna, A; 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings", (2007), 7 S.
S. Jauk, R. Liska:
"New Derivatives of Covalently linked Benzophenone-Amine based Photoinitiato";
Poster: RadTech Europe 2007, Vienna, A; 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings", (2007), 7 S.
B. Ganster, G. Ullrich, U. Salz, N. Moszner, R. Liska:
"Water-Soluble Bisacylphosphin oxides for the Photopolymerization of acidic aqueous Dental Formulations";
Poster: RadTech Europe 2007, Vienna, A; 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings", (2007), 7 S.
M. Schuster, C. Turecek, C. Heller, F. Varga, J. Stampfl, R. Liska:
"3D-Structuring of Gelatine based Photopolymers";
Poster: RadTech Europe 2007 - Europe´s event for UV/EB curing, Vienna 13-15 Nov 2007, Wien; 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 - Conference Proceedings", (2007), 6 S.
R. Inführ, N. Pucher, C. Heller, H. Lichtenegger, V. Schmidt, V. Satzinger, L. Kuna, A. Haase, J. Stampfl, R. Liska:
"Refractive Index Patterning of Polymeric Waveguide Materials";
Poster: RadTech Europe 2007 - Europe´s event for UV/EB curing, Vienna 13-15 Nov 2007, Wien; 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 - Conference Proceedings", (2007), 7 S.
R. Inführ, C. Fritscher, R. Liska, H. Lichtenegger, J. Stampfl, N. Hüsing:
"Fabrication of Bio-Inspired Ceramic Composites Using Soluble Photopolymers asMmold Materials";
Poster: Euromat 2005, Prag; 05.09.2005 - 08.09.2005; in: "Euromat 2005 European Congress on Advanced Materials and Processes", http://www.dgm.de/past/2005/euromat2005/programme/ (2005), Paper-Nr. P618, 1 S.
M. Schuster, C. Turecek, M. Rumpler, F. Varga, R. Liska, J. Stampfl:
"Development of Photopolymerizable Biopolymers for Rapid Prototyping of Cellular Bone Replacement Materials";
Poster: EuroMat 2005, Prag, Tschechien; 05.09.2005 - 06.09.2005; in: "Euromat 2005 European Congress on Advanced Materials and Processes http.//www.Euromat2005.fems.org", (2005), 1 S.
T. Verdianz, M. Schuster, M. Rumpler, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"Biophotopolymers for rapid prototyping of cellular bone replacement materials";
Poster: European Polymer Congress 2005, Moskau, Russland; 27.06.2005 - 01.07.2005; in: "CD European Polymer Congress 2005", (2005), Paper-Nr. P4.4.18 Ref.2290, 2 S.
T. Verdianz, H. Simbürger, H. Gruber, R. Liska:
"Surface modification of polyimides with co-reactive and catalytic groups";
Poster: European Polymer Congress 2005, Moskau, Russland; 27.06.2005 - 01.07.2005; in: "CD European Polymer Congress 2005", (2005), Paper-Nr. P1.2-60 Ref.2295, 2 S.
Talks (with Proceedings)
M. Kury, C. Gorsche, K. Seidler, P. Gauss, T. Koch, R. Liska:
"Addition-fragmentation chain transfer reagents in photopolymerisation of methacrylic monomers";
Vortrag: 6th Bratislava Young Polymer Scientists Workshop, High Tatras, Slovakia; 14.03.2016 - 18.03.2016; in: "BYPoS Workshop book", book of abstracts, (2016), ISBN: 978-80-970923-8-2; S. 95.
E. Zerobin, S. Baudis, Z. Tomasikova, X.H. Qin, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"Micro fabrication of hydrogels based on hyaluronic acid";
Vortrag: 6th Bratislava Young Polymer Scientists Workshop, High Tatras, Slovakia; 14.03.2016 - 18.03.2016; in: "BYPoS Workshop book", book of abstracts, (2016), ISBN: 978-80-970923-8-2; S. 107.
J. Stampfl, P. Dorfinger, R. Gmeiner, R. Liska:
"Materials development for lithography-based 3D-printing";
Vortrag: Makromolekulares Kolloquium, Freiburg; 24.02.2016 - 26.02.2016; in: "Macromolecular Chemistry and Physics", Wiley-VCH, 2 (2016), S. 90.
Z. Tomasikova, B. Husar, X.H. Qin, P. Gruber, M. Markovic, A. Ovsianikov, R. Liska:
"Hyaluronic acid based hydrogels for two photon lithography";
Vortrag: DVSPM 2015, Gmunden; 11.05.2015 - 13.05.2015; in: "Proceedings of a Conference on Polymer Science", (2015), ISBN: 978-3-99033-491-1; S. 59.
K. Seidler, C. Gorsche, T. Koch, N. Moszner, R. Liska:
"The influence of addition-fragmentation-chain-transfer on mechanical properties of methacrylate networks";
Vortrag: DVSPM 2015, Gmunden; 11.05.2015 - 13.05.2015; in: "Proceedings of a Conference on Polymer Science", (2015), ISBN: 978-3-99033-491-1; S. 65.
P. Gauss, C. Gorsche, M. Griesser, N. Moszner, R. Liska:
"Tuning β-allyl sulfones as chan transfer agents in dimethacrylic photopolymers";
Vortrag: DVSPM 2015, Gmunden; 11.05.2015 - 13.05.2015; in: "Proceedings of a Conference on Polymer Science", (2015), ISBN: 978-3-99033-491-1; S. 69.
P. Potzmann, F. Lopez Villanueva, R. Liska:
"UV Initiated Bubble Free Frontal Polymerization in Aqueos Conditions";
Vortrag: RadTech Europe 2015 Conference, Prague; 13.10.2015 - 15.10.2015; in: "Abstract Book", (2015), S. 36.
C. Gorsche, J. Stampfl, R. Liska:
"Photopolymerization: A powerful technique for the fabrication and 3D printing of biomaterials";
Vortrag: ISBPPB 2015, Orlando (eingeladen); 08.07.2015 - 10.07.2015; in: "Abstracts", (2015).
P. Gauss, C. Gorsche, M. Griesser, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Basic Investigation of Addition Fragmentation Chain Transfer Agents in Photopolymerization of Methacrylic Monomers";
Vortrag: RadTech Europe 2015 Conference, Prague; 13.10.2015 - 15.10.2015; in: "Abstract Book", (2015), S. 16.
S. Benedikt, J. Wang, M. Markovic, N. Moszner, K. Dietliker, A. Ovsianikov, H. Grützmacher, K. Hölzl, R. Liska:
"Highly Efficient Cleavable Photoinitiators for Visible Light curing of Aqueous Formulations";
Vortrag: RadTech Europe 2015 Conference, Prague; 13.10.2015 - 15.10.2015; in: "Abstract Book", (2015), S. 18.
P. Dorfinger, R. Liska, J. Stampfl:
"Toughening of Photopolymers for SLA";
Vortrag: 20. Symposium Verbundwerkstoffe und Werkstoffverbunde 2015, Wien; 01.07.2015 - 03.07.2015; in: "20th Symposium on Composites", Materials Science Forum, Volumes 825-826 (2015), ISBN: 978-3-03835-515-1; S. 53 - 59.
S. Benedikt, A. Gugg, U. Fischer, B. Ganster, C. Gorsche, N. Moszner, R. Liska:
"New Photopolymers in digital and restorative dentistry";
Vortrag: VSS 2015, Vienna; 25.06.2015 - 26.06.2015; in: "Book of Abstracts", Richard Zemann, (2015), ISBN: 978-3-9504017-0-7; S. 122 - 123.
P. Potzmann, S. Baudis, C. Dworak, H. Bergmeister, H. Schima, R. Liska:
"Thermoplastic Polyurethane Elastomers";
Vortrag: 79PMM, Prague; 28.06.2015 - 02.07.2015; in: "79th Prague Meeting on Macromolecules", (2015), ISBN: 978-80-85009-82-8.
H. Svajdlenková, O. Sausa, C. Gorsche, R. Liska:
"Micro structural pals study of dimethacrylate networks";
Vortrag: DVSPM 2015, Gmunden; 11.05.2015 - 13.05.2015; in: "Proceedings of a Conference on Polymer Science", (2015), ISBN: 978-3-99033-491-1; S. 75.
S. Orman, B. Husar, M. Schwentenwein, R. Liska:
"Biocompativle photopolymer composites for potential bon replacements";
Vortrag: DVSPM 2015, Gmunden; 11.05.2015 - 13.05.2015; in: "Proceedings of a Conference on Polymer Science", (2015), ISBN: 978-3-99033-491-1; S. 22.
D. Bomze, P. Knaack, W. Kern, R. Liska:
"Cationic frontal polymerization for the production of electrical insulating materials";
Vortrag: DVSPM 2015, Gmunden; 11.05.2015 - 13.05.2015; in: "Proceedings of a Conference on Polymer Science", (2015), ISBN: 978-3-99033-491-1; S. 62.
K. Seidler, C. Gorsche, M. Kury, H. Reghunathan, T. Koch, N. Moszner, R. Liska:
"Toughening of Methacrylate Networks through Addition-Fragmentation Chain Transfer";
Vortrag: RadTech Europe 2015 Conference, Prague; 13.10.2015 - 15.10.2015; in: "Abstract Book", (2015), S. 17.
S. Benedikt, N. Moszner, R. Liska:
"Benzoyl pheyltelluride as highly reactive terp-reagent for visible light induced controlled radical polymerization";
Vortrag: DVSPM 2015, Gmunden; 11.05.2015 - 13.05.2015; in: "Proceedings of a Conference on Polymer Science", (2015), ISBN: 978-3-99033-491-1; S. 127.
P. Knaack, D. Bomze, I. Krossing, R. Liska:
"New photoacid generator for cationic photopolymerisation";
Vortrag: RadTech Europe 2015 Conference, Prague; 13.10.2015 - 15.10.2015; in: "Abstract Book", (2015), S. 63.
C. Gorsche, K. Seidler, P. Gauss, G. Harakaly, M. Griesser, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Tough And Low Shrinkage Photopolymers For 3d-Printing";
Vortrag: Photopolymerization Fundamentals 2015, Boulder; 13.09.2015 - 16.09.2015; in: "Abstract USB", (2015).
D. Bomze, P. Knaack, R. Liska:
"Cationic Frontal Polymerization for curing of epoxide resins";
Vortrag: RadTech Europe 2015 Conference, Prague; 13.10.2015 - 15.10.2015; in: "Abstract Book", (2015), S. 38.
J. Stampfl, J. Homa, R. Liska:
"Lithography based Additive Manufacturing - Materials and Processes";
Vortrag: ChinaNANO 2015, Beijing; 03.09.2015 - 05.09.2015; in: "The 6th International Conference on Nanoscience & Technology", (2015), S. 179.
C. Gorsche, A. Ovsianikov, J. Stampfl, R. Liska:
"Photopolymerization: providing A triangle for material design, Biomaterials, and 3D printing";
Vortrag: VSS 2015, Vienna; 25.06.2015 - 26.06.2015; in: "Book of Abstracts", Richard Zemann, (2015), ISBN: 978-3-9504017-0-7; S. 138 - 139.
Z. Tomasikova, X.H. Qin, P. Gauss, R. Liska:
"3D Printing of biocompatible hydrogels";
Vortrag: 79PMM, Prague; 28.06.2015 - 02.07.2015; in: "79th Prague Meeting on Macromolecules", (2015), ISBN: 978-80-85009-82-8.
C. Gorsche, K. Seidler, P. Gauss, M. Griesser, T. Koch, G. Gescheidt, N. Moszner, R. Liska:
"Efficient tuning of (meth)acrylate polymer network architecture for 3D Printing";
Vortrag: P2M Lacanau, Lacanau (eingeladen); 26.05.2015 - 29.05.2015; in: "Abstracts", (2015).
C. Gorsche, T. Koch, N. Moszner, J. Stampfl, R. Liska:
"Allyl Sulfone / Dimethacrylate Networks: Homogeneous And Tough Photopolymer Networks For Biomedical Applications";
Vortrag: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 73.
S. Benedikt, N. Moszner, R. Liska:
"New And Highly Reactive Visible Light Photoiniferter: Benzoyl Phenyltelluride";
Vortrag: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 76.
R. Liska:
"Advanced Applications of Photopolymerization: 3D Printing of Biomaterials";
Vortrag: 24. Lecture Conference on Photochemistry, Köln (eingeladen); 29.09.2014 - 01.10.2014; in: "24. Lecture Conference of Photochemistry", (2014), S. 50.
Z. Tomasikova, X.H. Qin, B. Husar, P. Gruber, B. Plochberger, M. Markovic, A. Ovsianikov, J. Stampfl, R. Liska:
"Two-photon polymerisation of hyaluronic acid-based hydrogels for tissue engineering";
Vortrag: 5th Bratislava Young Polymer Scientists Workshop BYPoS, Zázrivá; 16.06.2014 - 20.06.2014; in: "BYPoS workshop book", book of abstracts, (2014), ISBN: 978-80-970923-5-1; S. 91.
S. Fröhlich, H. Bergmeister, R. Liska, M. Marchetti-Deschmann:
"Protein and lipid adsorption on vascular replacement systems studied by mass spectrometry imaging";
Vortrag: OurCon II Imaging Mass Spectrometry Conference, Antalya, Turkey; 18.11.2014 - 21.11.2014; in: "Abstract Book", (2014), S. 55.
P. Gruber, M. Markovic, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser Photofabrication of Cell-Containing Hydrogel Constructs";
Vortrag: 3rd European Symposium of Photopolymer Science, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), S. 167.
P. Gruber, M. Markovic, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser photofabrication of 3D cell-containing hydrogel constructs";
Vortrag: ICB 2014, Pohang, S. Korea; 28.09.2014 - 01.10.2014; in: "International Conference on Biofabrication", (2014).
A. Mautner, S. Ligon, B. Husar, T. Koch, J. Stampfl, R. Liska:
"Vinyl Esters With Improved Reactivity And Toughness";
Vortrag: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", A. Mautner, S. Ligon, B. Husar, T. Koch, J. Stampfl, R. Liska (Hrg.); (2014), ISBN: 978-3-9502992-9-8; S. 71.
D. Bomze, B. Husar, M. Markovic, A. Ovsianikov, R. Liska:
"Novel Low-Toxic Poly(vinyl Alcohol) Based Hydrogels For Tissue Engineering Via Thiol-Ene Crosslinking";
Vortrag: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 132.
M. Griesser, C. Gorsche, N. Moszner, R. Liska:
"Mechanistic Investigations Of Chain Transfer Reagents";
Vortrag: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 112.
B. Husar, C. Gorsche, X.H. Qin, H. Hoffmann, R. Liska:
"Monitoring Of Uv-Curing By Real Time Ftir - Photorheology";
Vortrag: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 108.
N. Zwirchmayr, P. Potzmann, C. Grasl, T. Koch, H. Bergmeister, R. Liska:
"Segmented linear thermoplastic urethane elastomers with novel building blocks for electrospinning of vascular grafts";
Vortrag: 5th Bratislava Young Polymer Scientists Workshop BYPoS, Zázrivá; 16.06.2014 - 20.06.2014; in: "BYPoS workshop book", book of abstracts, (2014), ISBN: 978-80-970923-5-1; S. 93.
D. Bomze, B. Husar, M. Markovic, A. Ovsianikov, R. Liska:
"Novel low-toxic poly(vinyl alcohol) based hydrogels for tissue engineering via thiol-ene crosslinking";
Vortrag: 5th Bratislava Young Polymer Scientists Workshop BYPoS, Zázrivá; 16.06.2014 - 20.06.2014; in: "BYPoS workshop book", book of abstracts, (2014), ISBN: 978-80-970923-5-1; S. 57.
S. Fröhlich, M. Strobl, H. Bergmeister, R. Liska, M. Marchetti-Deschmann:
"In vivo protein and lipid adsorption on vascular replacement systems studied by mass spectrometry imaging";
Vortrag: 8th Central and Eastern European Proteomics Conference, Vienna University of Teechnology (eingeladen); 30.06.2014 - 04.07.2014; in: "Abstractbook", M. Marchetti-Deschmann, G. Allmaier (Hrg.); (2014).
X.H. Qin, Z. Tomasikova, P. Gruber, B. Plochberger, M. Markovic, A. Ovsianikov, J. Stampfl, R. Liska:
"Two-Photon Microfabrication Of Biomimetic Hydrogel Constructs For Tissue Regeneration";
Vortrag: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 129.
B. Husar, A. Mautner, C. Heller, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl Carbonates and Vinyl Esters: From Synthesis to In Vivo Testing of Bone Replacement Material";
Vortrag: 25th European Conference on Biomaterials, Madrid; 08.09.2013 - 12.09.2013; in: "Book of contributions", (2013), ISBN: 978-84-695-7831-5.
B. Husar, A. Mautner, C. Heller, P. Esfandiari, F. Varga, J. Stampfl, R. Liska:
"Low toxic alternatives to (meth)acrylates: Vinyl esters, vinyl carbonates, and vinyl carbamates";
Vortrag: RadTech Asia 2013, Shanghai; 20.05.2013 - 24.05.2013; in: "Guide Book", (2013).
P. Potzmann, K. Seidler, S. Ligon, T. Koch, J. Stampfl, B. Messner, C. Grasl, H. Bergmeister, H. Schima, R. Liska:
"Thermoplastic polyurethane elastomers derived from new building blocks for vascular tissue engineering";
Vortrag: Austrian - Slovenian Polymer Meeting - ASPM 2013, Bled; 03.04.2013 - 05.04.2013; in: "The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013", M. Zigon, T. Rajsp (Hrg.); (2013), ISBN: 978-961-269-992-5; S. 37 - 38.
S. Ligon, M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Photocurable Poly-AMPS-Based Proton Exchange Membranes For Fuel Cells";
Vortrag: RadTech Europe 2013, Basel; 15.10.2013 - 17.10.2013; in: "Abstract Book", (2013), S. 88.
M. Tromayer, Z. Li, J. Torgersen, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, A. Ovsianikov, R. Liska:
"Novel Highly Efficient Initiators For Two-Photon Induced Photopolimerization";
Vortrag: RadTech Europe 2013, Basel; 15.10.2013 - 17.10.2013; in: "Abstract Book", (2013), S. 40.
M. Griesser, G. Gescheidt, R. Liska:
"Elucidating Reaction Mechanisms of Photoinitiators by Magnetic Resonance";
Vortrag: RadTech Europe 2013, Basel; 15.10.2013 - 17.10.2013; in: "Abstract Book", (2013), S. 36.
X.H. Qin, P. Esfandiari, S. Ligon, A. Ovsianikov, R. Liska:
"Storage Stable Thiol-Ene Formulations and advances applications thereof";
Vortrag: RadTech Europe 2013, Basel (eingeladen); 15.10.2013 - 17.10.2013; in: "Abstract Book", (2013), S. 14.
A. Ovsianikov, K. Haslinger, X.H. Qin, Z. Li, P. Gruber, J. Torgersen, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl:
"Laser microfabrication of 3D CAD structures from photosensitive hydrogel precursors";
Vortrag: International Conference on Materials for Advanced Technologies, Singapore; 30.06.2013 - 05.07.2013; in: "ICMAT 2013 - 7th International Conference on Materials for Advanced Technologies", (2013), S. 218.
X.H. Qin, J. Torgersen, S. Mühleder, W. Holnthoner, A. Ovsianikov, J. Stampfl, H. Redl, R. Liska:
"Two-photon microfabrication of artificial ECM hydrogel via thiol-ene chemistry";
Vortrag: 19th Swiss Conference on Biomaterials, Davos; 25.06.2013 - 26.06.2013; in: "Program & Abstract", D. Eglin, M. D´Este, D. Schraner (Hrg.); (2013), S. 19.
S. Ligon, B. Husar, H. Wutzel, H. Hoffmann, J. Torgersen, R. Liska:
"An overview of anti-oxygen inhibition strategies for LED-based wood coatings";
Vortrag: RadTech Asia 2013, Shanghai; 20.05.2013 - 24.05.2013; in: "Guide Book", (2013).
X.H. Qin, B. Husar, J. Torgersen, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Gelatin/Albumin-Based Hydrogels Scaffolds By Two-Photon Polymerization";
Vortrag: TERMIS-EU 2013, Istanbul; 17.06.2013 - 20.06.2013; in: "Abstracts", (2013), S. 195.
R. Liska:
"Advanced Applications of Storage Stable Thiol-Ene Formulations";
Vortrag: Photopolymerization Fundamentals 2013, Jackson Hole; 22.09.2013 - 25.09.2013; in: "Book of Abstracts", (2013).
X.H. Qin, S. Mühleder, J. Torgersen, A. Ovsianikov, H. Redl, J. Stampfl, R. Liska:
"3D construction of artifical ECM hydrogels by two-photon-induced polymerization";
Vortrag: Advances in Tissue Regeneration 2013, Lattrop; 14.11.2013 - 15.11.2013; in: "Advances in Tissue Regeneration 2013", (2013).
C. Gorsche, A. Mautner, A. Gugg, X.H. Qin, N. Moszner, J. Stampfl, K. Macfelda, G. Russmüller, R. Liska:
"UV-Initiated Frontal Polymerization and Other New Advances in Radical Photopolymerization";
Vortrag: 18th Fusion UV Seminar 2012, Osaka, Tokio (eingeladen); 21.02.2012 - 23.02.2012; in: "18th Fusion UV Seminar 2012 - Proceedings", (2012), S. 2-1.
S. Ligon, S. Baudis, K. Seidler, C. Grasl, H. Schima, H. Bergmeister, R. Liska:
"Mechanically flexible and controllably degradable electrospun thermoplastic polyurethanes for vascular prostheses";
Vortrag: E-MRS 2012 FALL MEETING (European Materials research Society), Warschau; 17.09.2012 - 21.09.2012; in: "E-Mrs 2012 Fall Meeting", (2012).
M. Kellner, F. Radovanovic, J. Matovic, R. Liska:
"High Performance Proton Conducting Membranes for Fuel Cells made by Photopolymerization of Hydrolytically Stable Monomers";
Vortrag: Physical Chemistry 2012, Belgrade, Serbia; 24.09.2012 - 28.09.2012; in: "Proceedings", (2012), S. 492 - 494.
C. Gorsche, A. Gugg, N. Moszner, R. Liska:
"UV-Initiated Frontal Polymerization for Dental Composites";
Vortrag: E-MRS 2012 FALL MEETING (European Materials research Society), Warschau; 17.09.2012 - 21.09.2012; in: "E-Mrs 2012 Fall Meeting", (2012).
S. Ligon, B. Husar, H. Wutzel, H. Hoffmann, J. Torgersen, R. Liska:
"Assessing anti-oxygen inhibition strategies for LED-based wood coatings by FTIR";
Vortrag: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012).
M. Susec, S. Ligon, R. Liska, P. Krajnc:
"Photostructured Microcellular Polyesters from High Internal Phase Emulsions";
Vortrag: EUPOC 2012 - Porous Polymer­Based Systems: From Design to Application, Gargnano, Italy; 03.06.2012 - 07.06.2012; in: "EUPOC 2012 - Porous Polymer­Based Systems: From Design to Application", (2012), S. 9.
S. Gruber, J. Torgersen, A. Neumeister, R. Felzmann, R. Liska, J. Stampfl:
"Advanced Photopolymer-based Additive Manufacturing Systems Using High Performance Light Sources";
Vortrag: 7th International Symposium on Emerging and Industrial DLP® Applications, Frankfurt; 30.10.2012; in: "7th International Symposium on Emerging and Industrial DLP® Applications", (2012).
S. Gruber, R. Felzmann, G. Mitteramskogler, R. Liska, J. Stampfl:
"Generation of ceramic parts via lithography-based AMT";
Vortrag: Materials Science and Engineering 2012, Darmstadt; 25.09.2012 - 27.09.2012; in: "MSE Programme", (2012), S. 37.
Z. Li, K. Cicha, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, J. Stampfl, R. Liska:
"A facial preparation and structure property relationship of novel photoinitiators for two -photon photopolymerization";
Vortrag: 4th Bratislava Young Polymer Scientists workshop, Bratislava; 01.10.2012 - 05.10.2012; in: "4th Bratislava Young Polymer Scientists workshop", (2012), ISBN: 978-80-970923-2-0; S. 83.
A. Ovsianikov, S. Nürnberger, J. Torgersen, Z. Li, H. Redl, R. Liska, J. Stampfl:
"Fabrication of elastic 3D scaffolds by two-photon polymerization";
Vortrag: Materials Science and Engineering 2012, Darmstadt, Deutschland; 25.09.2012 - 27.09.2012; in: "MSE Programme", (2012), S. 37.
Z. Li, X.H. Qin, A. Ovsianikov, J. Torgersen, A. Ajami, W. Husinsky, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Novel water soluble two-photon initiators for 3D scaffold microfabrication";
Vortrag: 5th Biomaterialsymposium, Vienna; 19.11.2012 - 21.11.2012; in: "5th Vienna Biomaterialsymposium 19.11.-21.11.2012", J. Stampfl (Hrg.); (2012), S. 95.
M. Kellner, P. Radovanovic, R. Liska, J. Matovic:
"Novel Crosslinker for Photopolymerization of Proton Conducting Fuel Cell Membranes";
Vortrag: 9th International Conference on Multi-Material Micro Manufacture - 4M 2012, Wien; 09.10.2012 - 11.10.2012; in: "Proceedings of the 9th International Conference on Multi-Material Micro Manufacture", (2012), ISBN: 978-981-07-3353-7; S. 148.
C. Gorsche, R. Liska, S. Ligon, B. Husar, A. Mautner, M. Schwentenwein, C. Heller, J. Stampfl, G. Russmüller:
"A new Generation of low toxic Monomers for Additive Manufacturing Technology";
Vortrag: E-MRS 2012 FALL MEETING (European Materials research Society), Warschau; 17.09.2012 - 21.09.2012; in: "E-MRS 2012 Fall Meeting", (2012).
M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Novel crosslinkers for high performance poly-AMPS-based proton exchange membranes for fuel cells";
Vortrag: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012).
H. Wutzel, J. Kumpfmüller, K. Stadlmann, Z. Li, J. Stampfl, R. Liska:
"Silicon-based waveguides via two-photon induced thiol-ene polymerization";
Vortrag: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science", (2012).
S. Gruber, G. Mitteramskogler, R. Felzmann, P. Tesavibul, R. Liska, J. Stampfl:
"Generative Erzeugung von biokeramischen Bauteilen";
Vortrag: Rapid.Tech 2012, Erfurt; 08.05.2012 - 09.05.2012; in: "Fachmesse und Anwendertagung für Rapid-Technologie", (2012), ISBN: 978-3-932875-34-2; S. 88 (105).
J. Stampfl, J. Torgersen, A. Ovsianikov, X.H. Qin, Z. Li, S Mühleder, W Holnthoner, R. Liska:
"Photo-stimulation of low-toxicity biopolymers in additive manufacturing";
Vortrag: Materials Science and Engineering 2012, Darmstadt, Deutschland; 25.09.2012 - 27.09.2012; in: "MSE Programme", (2012), S. 22.
J. Torgersen, A. Ovsianikov, V. Mironov, N.U Pucher, X.H. Qin, K. Cicha, Z. Li, T. Machacek, V. Jantsch-Plunger, R. Liska, J. Stampfl:
"Biocompatible Hydrogels for the Three-dimensional Micro-fabrication of Extracellular Environments";
Vortrag: Bio-inspired Materials, Potsdam; 20.03.2012 - 23.03.2012; in: "Bio-inspired Materials International School and Conference on Biological Materials Science", DGM Programme, (2012), S. 20.
R. Liska, C. Gorsche, A. Gugg, J. Stampfl, N. Moszner:
"Future Perspectives of photopolymerization";
Vortrag: 5th Biomaterialsymposium, Vienna; 19.11.2012 - 21.11.2012; in: "Abstracts", J. Stampfl (Hrg.); (2012), S. 129.
A. Ovsianikov, D. Dado-Rosenfeld, S. Nürnberger, S. Levenberg, H. Redl, R. Liska, J. Stampfl:
"Laser fabrication of multi-scale elastic 3D scaffolds";
Vortrag: 3rd TERMIS World Congress, Wien; 05.09.2012 - 08.09.2012; in: "Journal of Tissue Engineering and Regenerative Medicine", Wiley, (2012), S. 366.
B. Husar, H. Hoffmann, S. Ligon, R. Liska, H. Wutzel:
"Assessment of effectiveness of various antioxygen inhibition strategies in LED curing";
Vortrag: PRA´s 8th International Woodcoatings Congress, Asterdam; 30.10.2012 - 31.10.2012; in: "Congress Papers", PRA Coatings Technology Centre, Hampton, Middlesex, UK (2012), ISBN: 978-0-9561357-3-5.
M. Schwentenwein, C. Heller, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"3d-Fabrication Of Biodegradable Poly(vinyl Alcohol)-Based";
Vortrag: 19th Annual Meeting of the BioEnvironmental Polymer Society (BEPS), Wien; 28.09.2011 - 30.09.2011; in: "19th Annual Meeting of the BioEnvironmental Polymer Society", (2011), ISBN: 978-3-9502992-3-6; S. OP-10.
M. Susec, S. Ligon, R. Liska, P. Krajnc:
"Preparation of biocompatible porous polymers from multifunctional acrylates";
Vortrag: 1st International Workshop of CoE PoliMat, Ljubljana; 01.12.2011 - 02.12.2011; in: "Contributions to the working session with the international scientific council", (2011), S. 45 - 47.
M. Schwentenwein, J. Stampfl, C. Heller, F. Varga, G. Russmüller, R. Liska:
"3D-Structuring of Poly(vinyl alcohol)-based Photopolymers";
Vortrag: Termis Eu 2011, Granada, E; 07.06.2011 - 10.06.2011; in: "TERMIS EU 2011 Annual Meeting", (2011).
S. Ligon, J. Kumpfmüller, Z. Li, K. Stadlmann, K. Cicha, A. Ovsianikov, A. Ajami, W. Husinsky, A. Rosspeintner, J. Stampfl, R. Liska:
"Real 3D writing by two photon induced polymerization";
Vortrag: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011), S. 78.
J. Kumpfmüller, K. Stadlmann, Z. Li, G. Schmid, J. Stampfl, R. Liska:
"Two-photon-induced microfabrication of flexible optical waveguides";
Vortrag: The 12th International Symposium on Laser Precision Microfabrication, Takamatsu, J; 07.06.2011 - 10.06.2011; in: "Program and Technical Digest (LPM2011)", (2011), S. 104.
A. Mautner, X.H. Qin, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Efficient curing of vinyl esters and vinyl carbonates by thiol-ene polymerization";
Vortrag: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011).
A. Ovsianikov, J. Torgersen, R. Liska, J. Stampfl:
"3D photofabrication by femtosecond laser pulses and its applications in biomedicine";
Vortrag: 4th European Conference on Applications of Femtosecond Lasers in Materials Science FemtoMat & Nano and Photonics, Mauterndorf; 14.03.2011 - 18.03.2011; in: "4th European Conference on Applications of Femtosecond Lasers in Materials Science- Femto Mat", (2011), S. 4.
K. Cicha, Z. Li, A. Mautner, K. Stadlmann, J. Torgersen, N.U Pucher, R. Markut-Kohl, R. Liska, J. Stampfl:
"Fabrication and evaluation of 3D-micro-structures produced using two-photon-induced photopolymerization (TPIP or 2PP) by means of optical assessment and FTIR-spectroscopy";
Vortrag: Euromat 2011, Montpellier, France; 12.09.2011 - 15.09.2011; in: "Conference Proceeding Euromat 2011", (2011), S. 0453.
J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, C. Heller, R. Liska, J. Stampfl:
"Biocompatible Materials structured in-vivo using high-resolution AMT";
Vortrag: Euro Biomat, Jena; 13.04.2011 - 14.04.2011; in: "Euro Biomat - European Symposium on Biomaterials and Related Areas", 22 (2011), S. 18.
R. Liska, M. Schwentenwein, S. Baudis, S. Ligon, A. Mautner, A. Gugg, Z. Li, C. Gorsche, N.U Pucher, J. Torgersen, F. Nehl, H. Bergmeister, K. Macfelda, T. Koch, G. Russmüller, J. Stampfl:
"3D-Printing of Advanced Biomaterials by Additive Manufacturing Technologies";
Vortrag: UPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011), Cappadocia, TR (eingeladen); 05.09.2011 - 08.09.2011; in: "IUPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book", (2011), S. 101.
R. Liska, M. Schwentenwein, C. Heller, J. Stampfl, G. Russmüller:
"Low toxic monomers based on vinylesters and carbonates for additive manufacturing technology";
Vortrag: Frontiers in Biomedical Polymers 2011, Funchal, P; 09.05.2011 - 12.05.2011; in: "Ninth International Symposium on Frontiers in Biomedical Polymers", (2011), S. 47.
S. Ligon, S. Baudis, K. Seidler, C. Grasl, H. Schima, H. Bergmeister, G. Weigel, D. Bernhard, R. Liska:
"Assessment of Aliphatic Thermoplastic Polyurethanes for Narrow Diameter Vascular Grafts";
Vortrag: 4th Joint ESAO IFAO Congress, Porto, P; 09.10.2011 - 12.10.2011; in: "The International Journal of Artificial Organs", Wichtig Editore, Milano (2011), ISSN: 0391-3988; S. 645.
R. Liska, M. Schwentenwein, C. Heller, J. Stampfl, G. Russmüller:
"Printing of a New Generation of Low Toxicity Polymers by Additive Manufacturing Technology for Bone Tissue Engineering";
Vortrag: 4th Joint ESAO IFAO Congress, Porto, P; 09.10.2011 - 12.10.2011; in: "The International Journal of Artificial Organs", Wichtig Editore, Milano (2011), ISSN: 0391-3988; S. 634.
M. Susec, S. Ligon, R. Liska, P. Krajnc:
"Influence of initiator and solvent on porous structure of biocompatible polymers";
Vortrag: 2nd Conference on Applied Biocatalysis and 7th Meeting of Students and University Professors from Maribor and Zagreb, Maribor; 07.11.2011 - 08.11.2011; in: "Book of Abstracts", M. Leitgeb, M. Primozic (Hrg.); (2011).
M. Schwentenwein, F. Nehl, H. Wilhelm, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Photoelastomers based on thiol-ene polymerization";
Vortrag: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011), S. 90.
C. Gorsche, A. Gugg, N. Moszner, R. Liska:
"UV-initiated frontal polymerization with peracrylates";
Vortrag: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011).
A. Ovsianikov, F. Nehl, S. Baudis, B. Steyrer, R. Liska, J. Stampfl:
"Microenvironments for the Generation of Bioartificial Tissues";
Vortrag: 24th European Conference on Biomaterials, Dublin; 04.09.2011 - 08.09.2011; in: "24th European Conference on Biomaterials", (2011), S. 97.
A. Wilke, S. Baudis, H. Wilhelm, H. Bergmeister, F. Nehl, R. Liska, J. Stampfl:
"Additive Manufactured Photoelastomers as Tailor-made Biomaterials for Vascular Tissue Restoration";
Vortrag: Euromat 2011, Montpellier; 12.09.2011 - 15.09.2011; in: "Euromat 2011 Montpellier", (2011), S. 0264-1-1.
S. Baudis, H. Wilhelm, H. Bergmeister, J. Stampfl, R. Liska:
"Additive Manufactured Photoelastomers as Tailor-made Biomaterials for Vascular Tissue Restoration";
Vortrag: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).
R. Liska:
"Photopolymerization goes 3D";
Vortrag: European Symposium of Photopolymer Science, Mulhouse, France (eingeladen); 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010), S. 13.
R. Liska:
"Photopolymerization in Biomedical Applications";
Vortrag: 4. Wiener Biomaterialsymposium: Von der Werkstoffentwicklung bis zur klinischen Anwendung, TU Wien, Wien (eingeladen); 15.11.2010 - 17.11.2010; in: "Tagungsband", (2010), S. 53.
K. Stadlmann, K. Cicha, J. Kumpfmüller, R. Liska, J. Stampfl, U. Hinze, B. Chichkov:
"Development of a two Photon Polymerization setup for Structuring optical Waveguides with High Throughput";
Vortrag: Materials science and engineering MSE 2010, Darmstadt; 24.08.2010 - 26.08.2010; in: "Tagungsband Material science and engineering 2010", (2010), S. 32.
G. Russmüller, R. Liska, D. Moser, J. Stampfl, C. Schopper, R. Ewers:
"Knochenregeneration mittels Photopolymeren - erste in-vivo-Ergebnisse";
Vortrag: 4. Wiener Biomaterialsymposium, Wien; 15.11.2010 - 17.11.2010; in: "Tagungsband", J. Stampfl (Hrg.); (2010), S. 16.
K. Stadlmann, K. Cicha, J. Kumpfmüller, V. Schmidt, V. Satzinger, R. Liska, J. Stampfl:
"Fabrication of Optical Interconnects with Two Photon Polymerization";
Vortrag: 11th International Symposium on Laser Precision Microfabrication, LPM 2010, Stuttgart, D; 07.06.2010 - 10.06.2010; in: "Proceedings of LPM2010", K. Sugioka (Hrg.); (2010), S. #10-15.
M. Siklos, N.U Pucher, Z. Li, K. Cicha, A. Rosspeintner, A. Ajami, G. Gescheidt, W. Husinsky, J. Stampfl, R. Liska:
"Structure optimization of novel initiators for two-photon polymerization (2PP) process";
Vortrag: 11th International Symposium on Laser Precision Microfabrication, LPM 2010, Stuttgart, D; 07.06.2010 - 10.06.2010; in: "Book of Abstracts", (2010).
S. Baudis, H. Wilhelm, H. Bergmeister, J. Stampfl, R. Liska:
"Generativ gefertigte Photoelastomere als maßgeschneiderte Biomaterialien für vaskuläre Geweberegeneration";
Vortrag: 4. Wiener Biomaterialsymposium, Wien; 15.11.2010 - 17.11.2010; in: "Tagungsband", J. Stampfl (Hrg.); (2010), S. 6.
C. Dworak, M. Griessner, G. Gescheidt, G. Grabner, M. Höfer, R. Liska:
"Benzaldoxime esters as alternative Coinitiators for Radical Photopolymerization";
Vortrag: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).
C. Heller, X.H. Qin, M. Schwentenwein, G. Russmüller, F. Varga, R. Liska, J. Stampfl:
"3D-Photopolymere auf Basis vonPolyvinylalkohol: Von der Synthese zur in-vivo-Anwendung";
Vortrag: 4. Wiener Biomaterialsymposium, Wien; 15.11.2010 - 17.11.2010; in: "Tagungsband", J. Stampfl (Hrg.); (2010), S. 3.
J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, R. Liska, J. Stampfl:
"In Vivo Writing using Two-Photon-Polymerization";
Vortrag: 11th International Symposium on Laser Precision Microfabrication, LPM 2010, Stuttgart, D; 07.06.2010 - 10.06.2010; in: "Proceedings of LPM2010", K. Sugioka (Hrg.); (2010), S. #10-42.
J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, R. Liska, J. Stampfl:
"In-Vivo-Writing mittels Zweiphotonenlithographie";
Vortrag: 4. Wiener Biomaterialsymposium, Wien; 15.11.2010 - 17.11.2010; in: "Tagungsband- 4. Wiener Biomaterialsymposium", (2010), S. 24.
C. Dworak, T. Koch, F. Varga, R. Liska:
"Biocompatible phosphorus-containing Polymers for Radical Photopolymerization";
Vortrag: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010, Leoben; 08.09.2010 - 10.09.2010; in: "Book of Abstracts", (2010), S. 76 - 77.
R. Liska, N.U Pucher, C. Heller, M. Schwentenwein, R. Inführ, V. Satzinger, G. Gescheidt, V. Schmidt, F. Varga, J. Stampfl:
"Materials for Stereolithography of Optical and Medical Devices";
Vortrag: EPF 2009, European Polymer Congress, Graz, A; 12.07.2009 - 17.07.2009; in: "EPF'09, Book of Abstracts", (2009), S. 192.
A. Gugg, B. Ganster, N. Moszner, R. Liska:
"New Visible Light Photoinitiators for Dental Composites";
Vortrag: 13. Österreichische Chemietage, Wien; 24.08.2009 - 27.08.2009; in: "13. Österreichische Chemietage", (2009), ISBN: 978-3-900554-66-8.
J. Stampfl, C. Heller, M. Schwentenwein, F. Varga, R. Liska:
"Biocompatible and biodegradeable photopolymers for lithography based solid freeform fabrication";
Vortrag: European Polymer Congress 2009, Graz; 12.07.2009 - 17.07.2009; in: "Book of Abstracts", F. Stelzer (Hrg.); (2009), S. 208.
J. Stampfl, R. Inführ, K. Stadlmann, N.U Pucher, H. Lichtenegger, V. Schmidt, R. Liska:
"Materials for the fabrication of optical waveguides with two photon photopolymerization";
Vortrag: Fifth International WLT Conference on Lasers in Manufacturing, München (eingeladen); 15.06.2009 - 18.06.2009; in: "Lasers in Manufacturing 2009", A. Ostendorf (Hrg.); AT Fachverlag GmbH, Stuttgart (2009), S. P1 - P4.
C. Dworak, F. Karasu, R. Liska:
"Self-initiating Monomers";
Vortrag: EPF 2009, European Polymer Congress, Graz, A; 12.07.2009 - 17.07.2009; in: "EPF'09, Book of Abstracts", (2009), S. 227.
C. Heller, M. Schwentenwein, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"3D Fabrication of Poly(vinyl alcohol) based monomers";
Vortrag: 13. Österreichische Chemietage, Wien; 24.08.2009 - 27.08.2009; in: "13. Österreichische Chemietage", (2009), ISBN: 978-3-900554-66-8.
C. Heller, M. Schwentenwein, S. Baudis, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"Polyvinylalkohol basierende Photopolymere für die generative Fertigung von Gerüststrukturen für Tissue Engineering";
Vortrag: 3. Wiener Biomaterialsymposium, Wien; 19.11.2008 - 21.11.2008; in: "3. Wiener Biomaterialsymposium - Tagungsband", (2008), ISBN: 978-3-200-01613-2; S. 3.
G. Gescheidt, D. Neshchadin, M. Griesser, R. Liska:
"Insights Into Early Stages of Radical Polymerization by NMR The CIDNP Effect as a Mechanistic Tool";
Vortrag: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 29.
C. Heller, M. Schuster, S. Baudis, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"3d-Fabrication of Photopolymers as Scaffolds for Tissue Engineering using Rapid Prototyping";
Vortrag: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 10.
R. Liska, M. Schuster, C. Heller, S. Baudis, N.U Pucher, C. Turecek, V. Schmidt, H. Bergmeister, J. Stampfl, F. Varga, G. Weigel:
"New concepts of biocompatible and biodegradable photopolymers";
Vortrag: European Coatings Conference: "MEDICAL COATINGS AND ADHESIVES", Berlin, D (eingeladen); 10.04.2008 - 11.04.2008; in: "European Coatings Conference: "MEDICAL COATINGS AND ADHESIVES" Proceedings", (2008), S. 117 - 127.
N.U Pucher, R. Inführ, S. Bashir, V. Satzinger, V. Schmidt, W. Husinsky, H. Lichtenegger, J. Stampfl, R. Liska:
"Two-Photon Induced Photopolymerization - A Powerful Tool for Precise 3D Submicrofabrication";
Vortrag: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 11.
R. Liska, C. Heller, S. Baudis, M. Schuster, C. Turecek, H. Bergmeister, G. Weigel, M. Schulz, J. Stampfl, F. Varga:
"Biocompatible and biodegradable Photopolymers for Rapid Prototyping";
Vortrag: International Workshop on Biomacromolecules 2008, Stockholm, S; 01.06.2008 - 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts", (2008).
C. Heller, M. Schuster, S. Baudis, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"New Materials for 3D-Scaffolds for Tissue Engineering Applications";
Vortrag: TERMIS-EU 2008 Meeting, Porto, P; 22.06.2008 - 28.06.2008; in: "Abstracts from TERMIS-EU 2008 Meeting", Tissue Engineering, Part A, Vol. 14 / No. 5 (2008), ISSN: 1937-3341; S. 761.
S. Baudis, M. Schuster, C. Turecek, H. Bergmeister, G. Weigel, J. Stampfl, F. Varga, R. Liska:
"Development of flexible biocompatible photopolymers as artificial vascular replacement materials";
Vortrag: XXXIV ESAO Congress, Krems, A; 05.09.2007 - 08.09.2007; in: "The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress", D. Falkenhagen (Hrg.); The International Journal of Artificial Organs, 30 (8) (2007), ISSN: 0391-3988; S. 705.
J. Stampfl, M. Schuster, S. Baudis, H. Lichtenegger, R. Liska, C. Turecek, F. Varga:
"Biodegradable stereolithography resins with defined mechanical properties";
Vortrag: 3rd International conference on virtual and rapid prototyping (VRAP), Leiria, Portugal; 24.09.2007 - 29.09.2007; in: "Virtual and Rapid Manufacturing", P. Bartolo (Hrg.); Taylor and Francis, (2007), ISBN: 978-0-415-41602-3; S. 283 - 288.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, R. Inführ, T. Koch, S. Seidler:
"3-Dimensional Mesoporous Silica Monoliths and their Structural and Mechanical Properties";
Vortrag: Polymerwerkstoffe 2006, Halle/Saale, Deutschland; 27.09.2006 - 29.09.2006; in: "Polymerwerkstoffe 2006 - Abstracts", (2006), ISBN: 3-86010-856-5; S. 34.
B. Ganster, G. Ullrich, N. Moszner, U. Salz, R. Liska:
"Hydrophilic photoinitiators for acidic aqueous dental formulations";
Vortrag: 8th Austrian Polymer Meeting, Linz, Austria; 20.09.2006 - 22.09.2006; in: "8th Austrian Polymer Meeting - Abstracts", (2006).
J. Stampfl, R. Inführ, B. Seidl, H. Lichtenegger, R. Liska, V. Schmidt, L. Kuna, A. Haase:
"Two-Photon-3D-lithography of Functional Polymers";
Vortrag: Polymerwerkstoffe 2006, Halle/Saale, Deutschland; 27.09.2006 - 29.09.2006; in: "Polymerwerkstoffe 2006 -Abstracts", (2006), ISBN: 3-86010-856-5; S. 36.
M. Schuster, C. Turecek, F. Varga, H. Lichtenegger, J. Stampfl, R. Liska:
"Biodegradable photopolymers for bone tissue engeneering";
Vortrag: 8th Austrian Polymer Meeting, Linz, Austria; 20.09.2006 - 22.09.2006; in: "8th Austrian Polymer Meeting - Abstracts", (2006).
J. Stampfl, M. Schuster, R. Inführ, R. Liska, M.H. Luxner, H. E. Pettermann, F. Varga, C. Turecek:
"Rapid Prototyping als Fertigungswerkzeug zur Herstellung zellularer Strukturen";
Vortrag: 52. Metallkunde Kolloquium, Lech am Arlberg; 19.04.2006 - 21.04.2006; in: "52. Metallkunde-Kolloquium: Werkstoffforschung für Wirtschaft und Gesellschaft", (2006), S. #.
R. Inführ, H. Lichtenegger, J. Stampfl, R. Liska, C. Fritscher, N. Hüsing:
"3D Microstereolithography of soluble mold materials";
Vortrag: 31st International Conference on Micro- and Nano-Engineering 2005, Vienna; 19.09.2005 - 22.09.2005; in: "31st International Conference on Micro- and Nano-Engineering 2005 - Abstracts", (2005), S. 9D_04.
R. Liska, M. Schuster, R. Inführ, C. Turecek, F. Varga, H. Lichtenegger, J. Stampfl:
"Photopolymers for Rapid Prototyping of cellular Biomaterials";
Vortrag: 7th Austrian Polymer Meeting, Graz, Österreich; 04.07.2005 - 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program", (2005), S. 40.
S. Jauk, G. Ullrich, P. Burtscher, N. Moszner, R. Liska:
"New Concepts for Type II Photoinitiators";
Vortrag: 7th Austrian Polymer Meeting, Graz, Österreich; 04.07.2005 - 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program", (2005), S. 41.
R. Liska, B. Seidl:
"1,5-Diphenyl-1,4-diyn-3-one, a new and highly efficient Photoinitiator";
Vortrag: 228th ACS National Meeting, Philadelphia, USA (eingeladen); 22.08.2004 - 26.08.2004; in: "228th ACS Natinal Meeting Meeting Abstract", (2004), S. POLY-284.
H. Lichtenegger, C. Fritscher, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"3D-Templating of hierarchical ceramics";
Vortrag: MRS Spring Meeting 2004, San Francisco, USA; 12.04.2004 - 16.04.2004; in: "MRS Spring Meeting 2004, Abstracts", MRS, (2004), S. 368.
R. Liska, F. Schwager, H. Gruber, A. Wöß, A. Pisaipan, J. Stampfl, S. Seidler:
"A new Route for the Fabrication of Biomimetic Cellular Materials";
Vortrag: RadTech Europe 2003, Berlin, Germany; 03.11.2003 - 05.11.2003; in: "RadTech Europe 2003 Conference Proceedings", (2003), ISBN: 3-87870-152-7; S. 195 - 201.
J. Stampfl, A. Wöß, S. Seidler, F. Schwager, R. Liska, H. Gruber:
"Water soluble photocurable resins for rapid prototyping applications";
Vortrag: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium, Vienna, Austria; 15.09.2003 - 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ", (2003), S. 70.
R. Liska, N. Fuß, D. Herzog, B. Seidl, G. Grabner:
"New chromophores for photoinitiators";
Vortrag: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium, Vienna, Austria; 15.09.2003 - 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ", (2003), S. 90.
J. Stampfl, R. Cano Vives, S. Seidler, R. Liska, F. Schwager, H. Gruber, A. Wöß, P. Fratzl:
"Rapid Prototyping - A Route for the Fabrication of Biomimetic Cellular Materials";
Vortrag: 1st International Conference on Advanced Reserch in Virtual and Rapid Prototyping, Leira (Portugal), Leira (Portugal); 01.10.2003 - 04.10.2003; in: "1st International Conference on Advanced Research in Virtual and Rapid Prototyping, Leira (Portugal)", Leira (Portugal) (2003), ISBN: 972-99023-0-5; S. 659 - 666.
K. Lisak, R. Liska, S. Knaus, J. Wendrinsky:
"Photochemical Surface Modification of Polypropylene";
Vortrag: 10th"Tihany" Symposium on Radiation Chemistry, Sopron, Hungary; 31.08.2002 - 05.09.2002; in: "10th"Tihani" Symposium on Radiation Chemistry - Program and Abstracts", (2002).
Poster Presentation (with Proceedings)
M. Mitterbauer, N. Moszner, R. Liska:
"Synthesis of novel si-based long wavelength photoinitiators for dental applications";
Poster: 6th Bratislava Young Polymer Scientists Workshop, High Tatras, Slovakia; 14.03.2016 - 18.03.2016; in: "BYPoS Workshop book", book of abstracts, (2016), ISBN: 978-80-970923-8-2; S. 71.
S. Benedikt, N. Moszner, R. Liska:
"Water soluble visible light photoinitiators: li-tpo as highly reactive and soluble compound with extraordinary stability";
Poster: DVSPM 2015, Gmunden; 11.05.2015 - 13.05.2015; in: "Proceedings of a Conference on Polymer Science", (2015), ISBN: 978-3-99033-491-1; S. 127.
C. Gorsche, K. Seidler, P. Gauss, M. Griesser, T. Koch, N. Moszner, R. Liska:
"Addition Fragmentation Chain Transfer Reagents With Various Activating And Leaving Groups And Their Potential As Network Modifiers";
Poster: Photopolymerization Fundamentals 2015, Boulder; 13.09.2015 - 16.09.2015; in: "Abstract USB", (2015).
G. Harakaly, K. Seidler, M. Griesser, C. Gorsche, J. Stampfl, R. Liska:
"α-Sulfonoxy acrylate chain transfer agents for 3D printing of tough photopolymers";
Poster: RadTech Europe 2015 Conference, Prague; 13.10.2015 - 15.10.2015; in: "Abstract Book", (2015), S. 85.
S. Baudis, Z. Tomasikova, P. Knaack, X.H. Qin, J. Stampfl, A. Ovsianikov, R. Liska:
"A Thiol-Ene based Modular Material System with Hyaluronic Acid Building Blocks";
Poster: Photopolymerization Fundamentals 2015, Boulder; 13.09.2015 - 16.09.2015; in: "Abstract USB", (2015).
S. Orman, P. Potzmann, A. Samusjew, B. Husar, M. Schwentenwein, T. Koch, J. Stampfl, R. Liska:
"Photopolymerization Of Biocompatible Composites";
Poster: Photopolymerization Fundamentals 2015, Boulder; 13.09.2015 - 16.09.2015; in: "Abstract USB", (2015).
D. Grunenberg, C. Gorsche, M. Griesser, T. Koch, P. Dorfinger, J. Stampfl, N. Moszner, R. Liska:
"Tough Dimethacrylate Networks with Low Shrinkage Stress: Benefiting from β-Allyl Sulfones as Addition-Fragmentation Chain Transfer Agents";
Poster: BPS 2015, Bayreuth; 20.09.2015 - 22.09.2015; in: "Book of Abstracts", (2015).
D. Bomze, P. Knaack, R. Liska:
"Radical Induced Cationic Frontal Polymerization";
Poster: Photopolymerization Fundamentals 2015, Boulder; 13.09.2015 - 16.09.2015; in: "Abstract USB", (2015).
C. Gorsche, K. Seidler, M. Griesser, T. Koch, N. Moszner, R. Liska:
"Using Addition Fragmentation Chain Transfer For Tough Methacrylate-Based Networks With Low Shrinkage Stress";
Poster: Photopolymerization Fundamentals 2015, Boulder; 13.09.2015 - 16.09.2015; in: "Abstract USB", (2015).
M. Lunzer, A. Rosspeintner, B. Holzer, D. Lumpi, M. Tromayer, P. Gruber, E. Horkel, A. Ovsianikov, E. Vauthey, R. Liska, J. Fröhlich:
"Triarylamine based Materials as Two Photon Absorption Photoinitiators - Adjustment of Molecular Properties";
Poster: RadTech Europe 2015 Conference, Prague; 13.10.2015 - 15.10.2015; in: "Abstract Book", (2015), S. 84.
D. Grunenberg, C. Gorsche, M. Griesser, G. Gescheidt, N. Moszner, R. Liska:
"Dimethacrylate Networks with Tunable Properties: The High Effectiveness of β-Allyl Sulfone Chain Transfer Agents";
Poster: RadTech Europe 2015 Conference, Prague; 13.10.2015 - 15.10.2015; in: "Abstract Book", (2015), S. 83.
P. Knaack, D. Bomze, I. Krossing, R. Liska:
"Novel Initiator For Photoinduced Cationic Polymerisation";
Poster: Photopolymerization Fundamentals 2015, Boulder; 13.09.2015 - 16.09.2015; in: "Abstract USB", (2015).
P. Potzmann, F. Lopez Villanueva, R. Liska:
"Investigation Of Bubble Free, UV Initiated Frontal Polymerization In Aqueous Conditions";
Poster: Photopolymerization Fundamentals 2015, Boulder; 13.09.2015 - 16.09.2015; in: "Abstract USB", (2015).
P. Gauss, C. Gorsche, N. Moszner, R. Liska:
"β-Allyl sulfones with different activating groups as chain transfer agents in methacrylate photopolymerization";
Poster: P2M Lacanau, Lacanau; 26.05.2015 - 29.05.2015; in: "Book of Abstracts", (2015).
D. Bomze, B. Husar, P. Gruber, M. Markovic, A. Ovsianikov, R. Liska:
"Modified Poly(Vinyl Alcohol) based Hydrogels for Tissue Engineering via Thiol-Ene-Crosslinking";
Poster: Photopolymerization Fundamentals 2015, Boulder; 13.09.2015 - 16.09.2015; in: "Abstract USB", (2015).
Z. Tomasikova, X.H. Qin, B. Husar, P. Gruber, B. Plochberger, M. Markovic, A. Ovsianikov, J. Stampfl, R. Liska:
"Hyaluronic Acid-Based Hydrogels For Two-Photon Polymerisation Applications";
Poster: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 219.
X.H. Qin, K. Labuda, D. Bomze, A. Khadem, P. Slezak, R. Liska, H. Redl:
"ENGINEERED PHOTOCURABLE BIOMATERIALS TO HALT BLEEDINGApplication Of Thiol-Ene Click Chemistry For Potential Bone Replacement Materials";
Poster: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 188.
M. Griesser, B. Husar, P. Sehnal, K. Harper, A. Rose, D. Anderson, R. Liska:
"A New Variant Of Phosphine Oxide Photoinitiators";
Poster: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 166.
D. Bomze, B. Husar, P. Gruber, M. Markovic, A. Ovsianikov, R. Liska:
"Norbornen Modified Poly(vinyl Alcohol) Based Hydrogels For Tissue Engineering Via Thiol-Ene Crosslinking";
Poster: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), S. 147.
B. Holzer, M. Tromayer, D. Lumpi, A. Ajami, E. Horkel, W. Husinsky, A. Ovsianikov, R. Liska, J. Fröhlich:
"Cap-Linker-Cap Systems as Initiators for Two-Photon Induced-Polymerization";
Poster: LPM 2014, Vilnius; 17.06.2014 - 20.06.2014; in: "LPM 2014 Program & Technical Digest", (2014), S. 260.
P. Dorfinger, J. Stampfl, R. Liska:
"Toughening Of Photopolymers For Stereolithography (sl)";
Poster: 3rd European Symposium of Photopolymer Science, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", ESPS 2014, 1 (2014), ISBN: 978-3-9502992-9-8; S. 25 - 26.
B. Husar, C. Gorsche, X.H. Qin, H. Hoffmann, R. Liska:
"Real Time FTIR - Photorheology: A Powerful Tool for Monitoring Changes in Chemical and Viscoelastic Properties During UV-Curing";
Poster: IRDG Spring Meeting Vienna, Wien; 24.04.2014 - 25.04.2014; in: "Program & Poster Abstracts", (2014).
B. Husar, A. Samusjew, T. Koch, J. Stampfl, R. Liska:
"3D fabrication of scaffolds from low cytotoxic vinylester and thiols";
Poster: European Chapter Meeting, Genova; 10.06.2014 - 13.06.2014; in: "Special Issue: Tissue Engineering & Regenerative Medicine International", Journal of Tissue Engineering and Regenerative Medicine, 8 (Suppl. 1) (2014), S. 447.
M. Tromayer, P. Gruber, A. Ajami, A. Rosspeintner, S. Naumov, A. Ovsianikov, J. Stampfl, R. Liska:
"Synthesis And Characterization Of Aminostyryl-1,3,5-Triazines As Initiators For Two-Photon Induced Polymerization";
Poster: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 220.
K. Seidler, C. Gorsche, N. Moszner, R. Liska:
"The Effect Of Leaving Groups Of Chain Transfer Agents";
Poster: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 211.
S. Orman, A. Samusjew, B. Husar, T. Koch, J. Stampfl, R. Liska:
"Application Of Thiol-Ene Click Chemistry For Potential Bone Replacement Materials";
Poster: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 196.
P. Gauss, N. Moszner, R. Liska:
"Beta-Allyl Sulfones As Transfer Agents In Methacrylic Photopolymers";
Poster: ESPS 2014, Vienna; 09.09.2014 - 12.09.2014; in: "3rd European Symposium of Photopolymer Science", (2014), ISBN: 978-3-9502992-9-8; S. 164.
P. Gruber, M. Markovic, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser Photofabrication of Cell-Containing Hydrogel Constructs";
Poster: LPM 2014, Vilnius; 17.06.2014 - 20.06.2014; in: "LPM 2014 Program & Technical Digest", (2014), S. 263.
P. Gruber, M. Markovic, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser photofabrication of 3D cell-containing hydrogel constructs";
Poster: 2014 Tissue Engineering and Regenerative Medicine International Society-Asia Pacific Meeting (TERMIS-AP 2014), Daegu, S. Korea; 24.09.2014 - 27.09.2014; in: "2", (2014).
X.H. Qin, A. Ovsianikov, H. Redl, R. Liska:
"Development of a novel cytocompatible and photopolymerizable hydrogel precursor: hyaluronate vinyl ester";
Poster: 19th Swiss Conference on Biomaterials, Davos; 25.06.2013 - 26.06.2013; in: "Program & Abstract", D. Eglin, M. D´Este, D. Schraner (Hrg.); (2013), S. 19.
B. Husar, A. Mautner, C. Heller, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Biodegradable Bone Replacement Material From Low Cytotoxic Monomers";
Poster: TERMIS-EU 2013, Istanbul; 17.06.2013 - 20.06.2013; in: "Abstracts", (2013), S. 244.
R. Potzmann, X.H. Qin, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Hyaluron vinyl esters as novel precursors for photocurable hydrogels";
Poster: Photopolymerization Fundamentals 2013, Jackson Hole; 22.09.2013 - 25.09.2013; in: "Book of Abstracts", (2013).
C. Gorsche, M. Griesser, D. Neshchadin, A. Rosspeintner, V. Gorelik, B. Ganster, R. Saf, G. Gescheidt, N. Mozner, R. Liska:
"Investigating the mechanism and photoreactivity of germanium based long wavelength photoinitiators for dental materials";
Poster: Photopolymerization Fundamentals 2013, Jackson Hole; 22.09.2013 - 25.09.2013; in: "Book of Abstracts", (2013).
M. Susec, S. Ligon, R. Liska, P. Krajnc:
"Acrylate and thiol based highly porous polymers by emulsion templating : lecture at Third International Symposium Frontiers polymer science in association with the journal polymer";
Poster: Third International Symposium Frontiers polymer science in association with the journal polymer, Sitges; 21.05.2013 - 23.05.2013; in: "Programme Booklet", (2013).
P. Potzmann, X.H. Qin, N.U Pucher, J. Torgersen, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"High-precision manufacturing of 3D hydrogel scaffolds via two-photon polymerization";
Poster: RadTech Europe 2013, Basel; 15.10.2013 - 17.10.2013; in: "Abstract Book", (2013), S. 117.
M. Lunzer, B. Holzer, D. Lumpi, E. Horkel, R. Liska, J. Fröhlich:
"Synthesis of Novel Cap-Linker-Cap Structures as Potential Initiators For Two-Photon-Induced Polymerization";
Poster: 15th Blue Danube Symposium on Heterocyclic Chemistry, Sept. 1-5, 2013, Olomouc, Czech Republic, Olomouc; 01.09.2013 - 05.09.2013; in: "Book of Abstracts", (2013), ISBN: 978-80-263-0502-6; S. P45.
B. Husar, A. Samusjew, T. Koch, J. Stampfl, R. Liska:
"3D fabrication of scaffolds from low cytotoxic vinylester and thiols";
Poster: TERMIS/EU 2014, Genova; 10.06.2014 - 13.06.2014; in: "Meeting Abstracts", J Tissue Eng Regen Med, 8 (Suppl. 1) (2013), ISSN: 1932-7005; S. 447.
X.H. Qin, S. Mühleder, J. Torgersen, A. Ovsianikov, H. Redl, J. Stampfl, R. Liska:
"3D construction of artifical ECM hydrogels by two-photon-induced polymerization";
Poster: Advances in Tissue Regeneration 2013, Lattrop; 14.11.2013 - 15.11.2013; in: "Advances in Tissue Regeneration 2013", (2013).
X.H. Qin, B. Husar, J. Torgersen, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Biodegradable 3D Hydrogels Scaffold by Two-Photon Polymerization";
Poster: 25th European Conference on Biomaterials, Madrid; 08.09.2013 - 12.09.2013; in: "Book of contributions", (2013), ISBN: 978-84-695-7831-5.
M. Griesser, G. Gescheidt, R. Liska:
"Insights into the Reactivity of Photoinitiators by Magnetic Resonance";
Poster: 6th-Pacific Symposium on Radical Chemistry (6th-PSRC), Vancouver; 16.06.2013 - 20.06.2013; in: "6th Pacific Symposium on Radical Chemistry - Programme", (2013).
M. Tromayer, A. Mautner, B. Husar, C. Heller, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl carbonates with improved mechanical properties";
Poster: RadTech Europe 2013, Basel; 15.10.2013 - 17.10.2013; in: "Abstract Book", (2013), S. 120.
M. Griesser, A. Rosspeintner, C. Dworak, G. Gescheidt, R. Liska:
"Insights into the Reactivity of Benzaldoxime Esters as Photoinitiators";
Poster: RadTech Europe 2013, Basel; 15.10.2013 - 17.10.2013; in: "Abstract Book", (2013), S. 119.
P. Potzmann, X.H. Qin, N.U Pucher, J. Torgersen, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Micrometer-scale precise 3D hydrogel scaffolds prepared by two-photon polymerization";
Poster: Photopolymerization Fundamentals 2013, Jackson Hole; 22.09.2013 - 25.09.2013; in: "Book of Abstracts", (2013).
C. Gorsche, M. Tromayer, Z. Li, J. Torgersen, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, A. Ovsianikov, R. Liska:
"Efficent synthesis of two-photon initiators via one step aldol condensation";
Poster: Photopolymerization Fundamentals 2013, Jackson Hole; 22.09.2013 - 25.09.2013; in: "Book of Abstracts", (2013).
P. Potzmann, X.H. Qin, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Development of a novel photocurable hydrogel precursor";
Poster: RadTech Europe 2013, Basel; 15.10.2013 - 17.10.2013; in: "Abstract Book", (2013), S. 121.
S. Ligon, B. Husar, H. Wutzel, J. Torgersen, R. Liska:
"Developing anti-oxygen inhibition strategies for LED-based wood coatings";
Poster: RadTech Europe 2013, Basel; 15.10.2013 - 17.10.2013; in: "Abstract Book", (2013), S. 118.
R. Gmeiner, E. Fantino, B. Steyrer, A. Samusjew, B. Husar, R. Liska, J. Stampfl:
"Additive Manufacturing of Filled and Unfilled Bio-Photopolymers";
Poster: Jahrestagung der Deutschen Gesellschaft für Biomaterialien 2013, Erlangen; 26.09.2013 - 28.09.2013; in: "Bionano-Materials", Bionanomaterials/de Gruyter, 2013/volume 14/number S1 (2013), ISSN: 2193-0651; S. 46.
X.H. Qin, S. Mühleder, P. Gruber, A. Ovsianikov, H. Redl, R. Liska:
"Design and Synthesis of a Novel Hydrogel Precursor: hyaluronate vinyl esters";
Poster: Advances in Tissue Regeneration 2013, Lattrop; 14.11.2013 - 15.11.2013; in: "Advances in Tissue Regeneration 2013", (2013).
M. Susec, R. Liska, I. Pulko, P. Krajnc:
"Tiol-en klik polimerizacije v makro emulzijah";
Poster: Slovenski kemijski dnevi 2012, Portoroz; 12.09.2012 - 14.09.2012; in: "Slovenski kemijski dnevi 2012", Z. Kravanja, D. Brodnjak-Voncina, M. Bogataj (Hrg.); (2012), ISBN: 978-961-248-353-1.
X.H. Qin, Z. Li, J. Torgersen, A. Ovsianikov, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Developing Biodegradable 3D Hydrogels Scaffolds: From Synthesis to Two-photon Polymerization";
Poster: The 3rd TERMIS World Congress 2012, Vienna; 05.09.2012 - 08.09.2012; in: "Journal of Tissue Engineering and Regenerative Medicine 2012", John Wiley & Sons, Ltd., 6/Supplement s1/ (2012), ISSN: 1932-7005; S. 369.
Z. Li, X.H. Qin, A. Ovsianikov, J. Torgersen, S. Mühleder, W. Holnthoner, A. Ajami, W. Husinsky, J. Stampfl, R. Liska:
"Water Soluble Initiators for Two-photon Polymerization";
Poster: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012), S. 26.
N. Seyidova, C. Grasl, M. Stoiber, C. Schreiber, I. Walter, K. Seidler, S. Ligon, S. Baudis, R. Liska, D. Bernhard, H. Schima, H. Bergmeister:
"Elastomeric, nanostructured, biodegradable vascular grafts for small-diamter vascular replacement";
Poster: BioNanoMed 2012, Krems; 01.03.2012 - 02.03.2012; in: "BioNanoMed 2012", (2012).
M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Proton conducting fluorinated polymer nanomembrane for fuel cell applications";
Poster: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012), S. 21.
Z. Li, X.H. Qin, A. Ovsianikov, J. Torgersen, A. Ajami, W. Husinsky, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Water Soluble Initiators for Two-photon Polymerization";
Poster: The 3rd TERMIS World Congress 2012, Vienna; 05.09.2012 - 08.09.2012; in: "Journal of Tissue Engineering and Regenerative Medicine 2012", John Wiley & Sons, Ltd., 6/Supplement s1 (2012), ISSN: 1932-7005; S. 369.
H. Wutzel, A. Mautner, X.H. Qin, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"New monomers based on vinylcarbonates for biomedical applications";
Poster: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012), S. 23.
Z. Li, K. Cicha, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, J. Stampfl, R. Liska:
"A Straightforward Synthesis and Structure-Property Relationship of Highly Efficient Two-photon Photoinitiators for 3D microfabrication";
Poster: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012), S. 24.
B. Husar, A. Mautner, C. Heller, M. Schwentenwein, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"3D scaffolds from low toxic vinyl carbonates";
Poster: 5th Biomaterialsymposium, Vienna; 19.11.2012 - 21.11.2012; in: "Abstracts", J. Stampfl (Hrg.); (2012), S. 105.
X.H. Qin, Z. Li, J. Torgersen, A. Ovsianikov, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Development of biocompatible 3D hydrogel scaffolds: From synthesis to two-photon-polymerization";
Poster: 5th Biomaterialsymposium, Vienna; 19.11.2012 - 21.11.2012; in: "Abstracts", J. Stampfl (Hrg.); (2012), S. 65.
F. Höller, A. Ovsianikov, J. Torgersen, T. Koch, D. Dekel, S. Levenberg, S. Nürnberger, H. Redl, R. Liska, J. Stampfl:
"Laser microfabrication of elastic 3D scaffolds";
Poster: 5. Wiener Biomaterialsymposium, Wien; 19.11.2012 - 21.11.2012; in: "Abstracts 5th Biomaterialsymposium Vienna", (2012), S. 107 - 108.
X.H. Qin, Z. Li, A. Ovsianikov, J. Torgersen, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Developing biodegradable 3D hydrogel scaffolds: from synthesis to two-photon polymerization";
Poster: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012), S. 19.
Z. Li, X.H. Qin, A. Ovsianikov, J. Torgersen, A. Ajami, J. Stampfl, R. Liska:
"3D site-specific functionalization of matrices via multi-photon grafting and subsequent click reaction";
Poster: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012), S. 25.
X.H. Qin, Z. Li, S. Ligon, J. Torgersen, A. Ovsianikov, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Biodegradable 3D Hydrogel Scaffolds: Synthesis and Two-photon Polymerization";
Poster: E-MRS 2012 FALL MEETING (European Materials research Society), Warschau; 17.09.2012 - 21.09.2012; in: "E-Mrs 2012 Fall Meeting", (2012).
H. Bergmeister, C. Grasl, M. Stoiber, C. Schreiber, N. Seyidova, B. Kapeller, I. Walter, K. Seidler, S. Ligon, S. Baudis, R. Liska, H. Schima:
"Nanostructured, bioresorbable vascular substitutes";
Poster: 5th Biomaterialsymposium, Vienna; 19.11.2012 - 21.11.2012; in: "Abstracts", (2012).
N. Seyidova, C. Grasl, M. Stoiber, C. Schreiber, I. Walter, K. Seidler, S. Ligon, S. Baudis, R. Liska, D. Bernhard, H. Schima, H. Bergmeister:
"Biocompatibility evaluation of bioresorbable substitutes";
Poster: ISACB´S Biennal Meeting 2012, London, UK; 12.09.2012 - 15.09.2012; in: "ISACB´S Biennal Meeting 2012 - Programm", (2012), S. 49.
S. Ligon, B. Husar, A. Mautner, C. Heller, M. Schwentenwein, A. Wilke, G. Russmüller, J. Stampfl, R. Liska:
"Biocompatible monomers for photo-based additive manufacturing technologies";
Poster: MSE 2012 Darmstadt, Darmstadt, Germany; 25.09.2012 - 27.09.2012; in: "MSE 2012 Darmstadt", (2012), S. 380.
M. Susec, S. Ligon, J. Stampfl, R. Liska, P. Krajnc:
"Stereolithography with hierarchical polymers based on high internal phase emulsions";
Poster: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012), S. 20.
S. Ligon, B. Husar, S. Baudis, K. Seidler, G. Weigel, C. Grasl, H. Bergmeister, R. Liska:
"Ester based thermoplastic polyurethanes for electrospun vascular prostheses";
Poster: The 3rd TERMIS World Congress 2012, Vienna; 05.09.2012 - 08.09.2012; in: "Journal of Tissue Engineering and Regenerative Medicine 2012", John Wiley & Sons, Ltd., 6/Supplement s1/ (2012), ISSN: 1932-7005; S. 146.
H. Wutzel, C. Dworak, R. Tiefenthaler, J. Lagref, R. Frantz, Z. Cherkaoui, R. Liska:
"Ionic liquids for radical photopolymerization";
Poster: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012), S. 22.
P. Potzmann, K. Seidler, S. Ligon, T. Koch, J. Stampfl, R. Liska:
"New building blocks for thermoplastic polyurethane elastomers for soft tissue engineering";
Poster: The 3rd TERMIS World Congress 2012, Vienna; 05.09.2012 - 08.09.2012; in: "Journal of Tissue Engineering and Regenerative Medicine 2012", John Wiley & Sons, Ltd., 6/Supplement s1/ (2012), ISSN: 1932-7005; S. 215.
S. Ligon, S. Baudis, F. Nehl, A. Mautner, B. Husar, M. Schwentenwein, A. Wilke, J. Stampfl, G. Russmüller, R. Liska:
"Biocompatible monomers for photo-based additive manufacturing technologies";
Poster: Materials Science and Engineering 2012, Darmstadt; 25.09.2012 - 27.09.2012; in: "MSE Programme", (2012), S. 62.
Z. Li, A. Ovsianikov, J. Torgersen, J. Stampfl, R. Liska:
"3D site-specific functionalization of matrices via multi-photon grafting and subsequent click reaction";
Poster: International Symposium on NanoPhotonics 2012, Beijing; 12.02.2012 - 14.02.2012; in: "International Symposium on NanoPhotonics 2012", (2012).
M. Susec, R. Liska, S. Ligon, P. Krajnc:
"Hierarchically porous polymers from divinyladipate and thiols via emulsion templating";
Poster: 5th Biomaterialsymposium, Vienna; 19.11.2012 - 21.11.2012; in: "Abstracts", J. Stampfl (Hrg.); (2012), S. 83.
M. Susec, S. Ligon, R. Liska, P. Krajnc:
"Photopolymerised microcellular polyesters from high internal phase emulsions";
Poster: Iupac Macro 2012, Blacksburg; 24.06.2012 - 29.06.2012; in: "Extended Abstracts", (2012).
B. Husar, M. Schwentenwein, C. Heller, A. Mautner, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"Biocompatible and biodegradable photopolymers from low cytotoxic vinyl esters";
Poster: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011), S. 118.
J. Kumpfmüller, K. Stadlmann, V. Satzinger, J. Stampfl, R. Liska:
"Fabrication of flexible optical waveguides via two-photon induced thiol-ene polymerization";
Poster: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011), S. 124.
H. Wutzel, A. Gugg, N. Moszner, R. Liska:
"Chain transfer reagents for molecular weight control in radical photo-polymerization";
Poster: UPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011), Cappadocia, TR; 05.09.2011 - 08.09.2011; in: "IUPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book", (2011), S. 260.
H. Wutzel, S. Ligon, B. Husar, C. Dworak, H. Hoffmann, R. Liska:
"Comparison of different chemical strategies to overcome oxygen-inhibition in LED-curing of thin films assessed by IR-spectroscopy";
Poster: UPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011), Cappadocia, TR; 05.09.2011 - 08.09.2011; in: "IUPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book", (2011), S. 257.
M. Kellner, Ph Radovanovic, J. Matovic, R. Liska:
"Photopolymerizable Monomer Formulations for Nanoporous Proton Conducting Membranes";
Poster: 4M 2011 - 8th International Conference on Multi-Material Micro Manufacture, Stuttgart, D; 08.11.2011 - 10.11.2011; in: "4M 2011 - Proceedings of the 8th International Conference on Multi-Material Micro Manufacture", Research Publishing, (2011), ISBN: 978-981-07-0319-6; S. 242 - 244.
M. Schwentenwein, S. Baudis, F. Nehl, S. Ligon, A. Nigisch, H. Bergmeister, A. Blümel, W. Grogger, D. Bernhard, J. Stampfl, R. Liska:
"Elastomeric Photopolymers by Thiol-ene Polymerization for Vascular Tissue Engineering";
Poster: 4th Joint ESAO IFAO Congress, Porto, P; 09.10.2011 - 12.10.2011; in: "The International Journal of Artificial Organs", Wichtig Editore, Milano (2011), ISSN: 0391-3988; S. 679.
M. Susec, R. Liska, P. Krajnc:
"Priprava biozdruzljivih poroznih polimerov iz multifunkcionalnih akrilatov = Preparation of biocompatible porous polymers from multifunctional acrylates";
Poster: Slovenski kemijski dnevi 2011, Portoroz; 14.09.2011 - 16.09.2011; in: "Abstracts", (2011).
K. Seidler, S. Ligon, S. Baudis, T. Koch, J. Stampfl, R. Liska:
"Biodegradable Thermoplastic Polyurethanes: Synthesis and Characterization of Improved TPUs";
Poster: 4th Joint ESAO IFAO Congress, Porto, P; 09.10.2011 - 12.10.2011; in: "The International Journal of Artificial Organs", Wichtig Editore, Milano (2011), ISSN: 0391-3988; S. 692.
M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Photopolymerization of crosslinked proton conducting membranes";
Poster: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011), S. 123.
P. Radovanovic, M. Kellner, J. Matovic, R. Liska:
"Novel asymmetric interpenetrating proton-conducting membrane";
Poster: ICOM 2011 - International Congress on Membranes and Membrane Processes, Amsterdam, Niederlande; 23.07.2011 - 29.07.2011; in: "ICOM 2011", (2011), S. 642.
S. Ligon, C. Heller, M. Schwentenwein, J. Stampfl, F. Varga, G. Russmüller, R. Liska:
"Rapid Prototyping of Bioabsorbalbe Polyvinylesters for Tissue Engineering";
Poster: ESAO - ASAIO Winter School 2011, Semmering; 26.01.2011 - 29.01.2011; in: "ESAO-ASAIO Winter School", (2011), S. 51.
M. Schwentenwein, C. Heller, J. Stampfl, F. Varga, G. Russmüller, R. Liska:
"New Types of Photopolymers for Regenerative Medicine";
Poster: ESAO - ASAIO Winter School 2011, Semmering, A; 26.01.2010 - 29.01.2010; in: "ESAO-ASAIO Winter School", (2011), S. 66.
S. Ligon, C. Dworak, T. Koch, F. Varga, R. Liska:
"Photopolymerizable biocompatible polymers based on phosphorous containing vinyl esters and vinyl carbamates";
Poster: Frontiers in Biomedical Polymers 2011, Funchal, P; 09.05.2011 - 12.05.2011; in: "Ninth International Symposium on Frontiers in Biomedical Polymers", (2011), S. 63.
Z. Li, M. Siklos, N.U Pucher, K. Cicha, A. Ajami, W. Husinsky, A. Rosspeintner, E. Vauthey, G. Gescheidt, J. Stampfl, R. Liska:
"Several novel aromatic ketone-based initiators for two-photon polymerization";
Poster: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011), S. 126.
S. Baudis, F. Nehl, S. Ligon, H. Wutzel, A. Nigisch, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Urethane-based photoelastomers with defined cellular struchture for scaffold-based vascular tissue engineering";
Poster: UPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011), Cappadocia, TR; 05.09.2011 - 08.09.2011; in: "IUPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book", (2011), S. 148.
Ph Radovanovic, M. Kellner, J. Matovic, R. Liska:
"Asymmetric Sol-gel Proton-conducting Membrane";
Poster: 4M 2011 - 8th International Conference on Multi-Material Micro Manufacture, Stuttgart, D; 08.11.2011 - 10.11.2011; in: "4M 2011 - Proceedings of the 8th International Conference on Multi-Material Micro Manufacture", Research Publishing, (2011), ISBN: 978-981-07-0319-6; S. 230 - 233.
P. Radovanovic, M. Kellner, J. Matovic, R. Liska:
"Asymmetric proton-conducting membrane made by photopolymerization";
Poster: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011), S. 129.
A. Gugg, H. Wutzel, N. Moszner, R. Liska:
"Controlled photopolymerization by addition fragmentation chain transfer agents";
Poster: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011), S. 134.
M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Proton conducting membranes based on photopolymerizable monomers";
Poster: ICOM 2011 - International Congress on Membranes and Membrane Processes, Amsterdam, Niederlande; 23.07.2011 - 29.07.2011; in: "ICOM 2011", (2011), S. 667.
S. Baudis, C. Grasl, H. Bergmeister, M. Arras, B. Winter, H. Schima, R. Liska:
"Desing of(Bio)degradable Thermoplastic Urethane-Elastomers for Electrospun Vascular Grafts";
Poster: ESAO - ASAIO Winter School 2011, Semmering; 26.01.2011 - 29.01.2011; in: "ESAO-ASAIO Winter School", (2011), S. 33.
F. Nehl, H. Wilhelm, H. Bergmeister, J. Stampfl, R. Liska:
"Mechanical Characteriszation of Photoelastomers for Vascular Tissue Regeneration";
Poster: ESAO - ASAIO Winter School 2011, Semmering; 26.01.2011 - 29.01.2011; in: "ESAO-ASAIO Winter School", (2011), S. 56 - 57.
S. Ligon, C. Dworak, S. Baudis, F. Nehl, H. Wilhelm, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Tailor-made Biomaterials for Vascular Tissue Regeneration printed by Additive Manufacturing Technologies";
Poster: Frontiers in Biomedical Polymers 2011, Funchal, P; 09.05.2011 - 12.05.2011; in: "Ninth International Symposium on Frontiers in Biomedical Polymers", (2011), S. 87 - 88.
P. Krajnc, M. Susec, I. Pulko, R. Liska:
"Towards biocompatible and biodegradable polyHIPEs";
Poster: EUPOC 2011, Gargnano; 29.05.2011 - 03.06.2011; in: "Biobased polymers and related biomaterials : abstract booklet", (2011).
J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, R. Liska, J. Stampfl:
"In Vivo Scaffold Fabrication";
Poster: ESAO-ASAIO Winter School 2011, Semmering; 26.01.2011 - 29.01.2011; in: "Advancing Roles: Biomaterials in Artificial Organs and Regenerative Medicine", D. Falkenhagen, E. F. Leonard, S. Mikhalovsky (Hrg.); (2011), S. 70.
M. Kellner, Ph Radovanovic, J. Matovic, R. Liska:
"Photopolymerisation of proton conducting biomimetic membranes";
Poster: European Symposium of Photopolymer Science, Mulhouse, F; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science", (2010).
C. Dworak, T. Koch, F. Varga, R. Liska:
"Biocompatible phosphorus-containing Polymers for Radical Photopolymerization";
Poster: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).
B. Husar, M. Schwentenwein, C. Heller, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"Biomaterials based on low cytotoxicity vinyl esters for bone replacement application";
Poster: 4. Wiener Biomaterialsymposium: Von der Werkstoffentwicklung bis zur klinischen Anwendung, TU Wien, Wien; 15.11.2010 - 17.11.2010; in: "Tagungsband", (2010), S. 57.
M. Siklos, Z. Li, N.U Pucher, R. Liska, J. Stampfl:
"New Initiators for Two-Photon Photopolymerisation";
Poster: Junior Scientist Conference 2010, Vienna; 07.04.2010 - 09.04.2010; in: "Proceedings", (2010), ISBN: 978-3-200-01797-9; S. 211 - 212.
S. Baudis, R. Liska:
"Two Approaches for the Development of Materials for Vascular Tissue Regeneration";
Poster: Junior Scientist Conference 2010, Vienna; 07.04.2010 - 09.04.2010; in: "Proceedings", (2010), ISBN: 978-3-200-01797-9; S. 271 - 272.
L. Zhiquan, M. Siklos, N.U Pucher, K. Cicha, A. Ajami, W. Husinsky, J. Stampfl, R. Liska:
"Synthesis and structure-activity relationship of serveral keton-based two-photon initiators";
Poster: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).
F. Nehl, S. Baudis, H. Wilhelm, H. Bergmeister, J. Stampfl, R. Liska:
"Mechanical Characterisation of Photoelastomers for Vascular Tissue Regeneration";
Poster: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).
P. Tesavibul, J. Patzer, R. Felzmann, R. Liska, J. Stampfl:
"Customized ceramic implants made by lithography based additive manufacturing";
Poster: 4. Wiener Biomaterialsymposium, Wien; 15.11.2010 - 17.11.2010; in: "Tagungsband", J. Stampfl (Hrg.); (2010), S. 25.
B. Husar, M. Schwentenwein, C. Heller, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl carbonates as low cytotoxicity monomers for fabrication of biocompatible 3d scaffolds";
Poster: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).
J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, R. Liska, J. Stampfl:
"In Vivo Nanostructuring of Biocompatible Materials";
Poster: BioNanoMed 2010, Krems a.d. Donau; 02.11.2010 - 03.11.2010; in: "BioNanoMed 2010", (2010), S. 12.
A. Mautner, J. Stampfl, R. Liska:
"Rheological and mechanical behavior of photopolymers with different additives";
Poster: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010, Leoben; 08.09.2010 - 10.09.2010; in: "Book of Abstracts", (2010), S. 190.
C. Dworak, M. Griesser, G. Gescheidt, R. Liska:
"Oxime esters as potential Coinitiators for Radical Photopolymerization";
Poster: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010, Leoben; 08.09.2010 - 10.09.2010; in: "Book of Abstracts", (2010), S. 196 - 197.
M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Proton conducting biomimetic membranes based on sulfonic polymeres";
Poster: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010, Leoben; 08.09.2010 - 10.09.2010; in: "Book of Abstracts", (2010), S. 120 - 121.
C. Dworak, M. Griessner, G. Gescheidt, G. Grabner, S. Jauk, M. Höfer, R. Liska:
"Covalently linked Benzophenone-Amine Photoinitiators with a beta-phenylogous cleavage";
Poster: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).
X.H. Qin, J. Torgersen, L. Zhiquan, A. Ovsianikov, C. Heller, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska:
"Two-photon induced polymerization for 3D fabrication of Biocompatible and Biodegradable hydrogels";
Poster: 4. Wiener Biomaterialsymposium: Von der Werkstoffentwicklung bis zur klinischen Anwendung, TU Wien, Wien; 15.11.2010 - 17.11.2010; in: "Tagungsband", (2010), S. 56.
J. Kumpfmüller, R. Liska:
"Structuring of polysiloxane-based waveguides via two-photon induced polymerization";
Poster: Junior Scientist Conference 2010, Vienna; 07.04.2010 - 09.04.2010; in: "Proceedings", (2010), ISBN: 978-3-200-01797-9; S. 245 - 246.
S. Baudis, C. Grasl, H. Bergmeister, H. Schima, J. Stampfl, R. Liska:
"(Bio)abbaubare Urethan-Elastomere für Elektroversponnene Blutgefäßersatzmaterialien";
Poster: 4. Wiener Biomaterialsymposium: Von der Werkstoffentwicklung bis zur klinischen Anwendung, TU Wien, Wien; 15.11.2010 - 17.11.2010; in: "Tagungsband", (2010), S. 7.
Z. Li, M. Siklos, K. Cicha, A. Ajami, W. Husinsky, J. Stampfl, R. Liska:
"C4-303 Synthesis and Structure-Activity Relationship of Several Novel Two-Photon Initiators based on a D-pi-A-pi-D Chromophor";
Poster: Materials science and engineering MSE 2010, Darmstadt; 24.08.2010 - 26.08.2010; in: "Tagungsband Material science and engineering 2010", (2010), S. 40.
X.H. Qin, J. Torgersen, C. Heller, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska:
"Two-photon induced Polymerization for 3D Microfabrication of Biocompatible and Biodegradable Hydrogels";
Poster: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).
J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, J. Stampfl, R. Liska:
"Poster F5-64 In-Vivo Writing using Two-Photon-Polymerization as Enabling Technology for Making Use of Bio-inspired Structures";
Poster: Materials science and engineering MSE 2010, Darmstadt; 24.08.2010 - 26.08.2010; in: "Tagungsband Material science and engineering 2010", (2010), S. 45.
A. Mautner, J. Stampfl, R. Liska:
"Influence of various additives onto the rheological and mechanical behavior of photopolymers";
Poster: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).
M. Schwentenwein, C. Heller, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"3D fabrication of poly(vinyl alcohol)-based photopolymers for biomedical applications";
Poster: European Symposium of Photopolymer Science, Mulhouse, France; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book", (2010).
S. Baudis, C. Grasl, H. Bergmeister, M. Arras, B. Winter, H. Schima, R. Liska:
"(bio)degradable Urethane-Elastomers For Electrospun Vascular Grafts";
Poster: XXXVII ESAO Congress, Skopje, R. Macedonia; 08.09.2010 - 11.09.2010; in: "The International Journal of Artificial Organs Vol. 33/No. 7 (2010 July), Abstracts from the XXXVII ESAO Congress", Wichtig Editore, Milano - Birmingham - Osaka (2010), ISSN: 0391-3988; S. 467.
A. Gugg, N. Moszner, R. Liska:
"Chain Transfer Reagents in Radical Photopolymerization";
Poster: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010, Leoben; 08.09.2010 - 10.09.2010; in: "Book of Abstracts", (2010), S. 194 - 195.
R. Inführ, N.U Pucher, H. Lichtenegger, R. Liska, V. Schmidt, V. Satzinger, N. Galler, K. Stadlmann, J. Stampfl:
"Refractive Index Patterning of Flexible Waveguide Materials by Means of Two‑Photon 3D Lithography";
Poster: Viennano'09 - 3rd Vienna International Conference Nano-Technology, Vienna; 18.03.2009 - 20.03.2009; in: "Nano-Technology", W.J. Bartz (Hrg.); (2009), ISBN: 978-3-901657-32-0; S. 503 - 508.
C. Dworak, S. Jauk, D. Neshchadin, A. Rosspeintner, G. Gescheidt, R. Liska:
"Radical Photoinitiators with β-phenylogous Cleavage";
Poster: EPF 2009, European Polymer Congress, Graz, A; 12.07.2009 - 17.07.2009; in: "EPF'09, Book of Abstracts", (2009), S. 265.
S. Baudis, B. Steyrer, T. Pulka, H. Wilhelm, G. Weigel, H. Bergmeister, J. Stampfl, R. Liska:
"Photopolymerizable Elastomers for Vascular Tissue Regeneration";
Poster: EPF 2009, European Polymer Congress, Graz, A; 12.07.2009 - 17.07.2009; in: "EPF'09, Book of Abstracts", (2009), S. 130.
A. Rosspeintner, N.U Pucher, M. Griesser, R. Liska, G. Gescheidt:
"Mechanistic Investigation on Novel Two-Photon Absorbing Photoinitiators";
Poster: XXIV International Conference on Photochemistry, Toledo; 19.07.2009 - 24.07.2009; in: "Book of Abstracts", (2009), S. 483.
C. Heller, M. Schwentenwein, N.U Pucher, K. Stadlmann, T. Koch, F. Varga, J. Stampfl, R. Liska:
"3D fabrication of new poly(vinyl alcohol) based Scaffolds for Tissue Engineering";
Poster: Radtech Europe Conference 2009, Nizza; 14.10.2009 - 15.10.2009; in: "UV/EB- Sustainable Technology", D. Helsby (Hrg.); (2009).
J. Kumpfmüller, K. Stadlmann, R. Inführ, N.U Pucher, J. Stampfl, R. Liska:
"Two-Photon-Induced Waveguide Formation In Polysiloxanes";
Poster: 13. Österreichische Chemietage, Wien; 24.08.2009 - 27.08.2009; in: "13. Österreichische Chemietage", (2009), ISBN: 978-3-900554-66-8; S. 14.
M. Schwentenwein, C. Heller, J. Stampfl, F. Varga, R. Liska:
"Biocompatible and Biodegradable monomers with different polymerizable groups";
Poster: EPF 2009, European Polymer Congress, Graz, A; 12.07.2009 - 17.07.2009; in: "EPF'09, Book of Abstracts", (2009), S. 208.
C. Dworak, F. Varga, R. Liska:
"Photopolymerization of Biocompatible Phosphorus-based Monomers";
Poster: EPF 2009, European Polymer Congress, Graz, A; 12.07.2009 - 17.07.2009; in: "EPF'09, Book of Abstracts", (2009), S. 130.
N.U Pucher, S. Baudis, C. Heller, M. Schuster, V. Satzinger, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"Fabrication of Biocompatible and Cellular Polymers with Sub-Micrometer Feature Resolution by means of Two-Photon Induced Photopolymerization";
Poster: International Workshop on Biomacromolecules 2008, Stockholm, S; 01.06.2008 - 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts", (2008).
M. Porodec, C. Heller, R. Liska, J. Stampfl, M. Hacker, M. Schulz-Siegmund:
"Surface Immobilization of model protein onto new photo cross-linkable materials";
Poster: 3. Wiener Biomaterialsymposium, Wien; 19.11.2008 - 21.11.2008; in: "3. Wiener Biomaterialsymposium - Tagungsband", (2008), ISBN: 978-3-200-01613-2; S. 60.
S. Baudis, M. Schuster, C. Heller, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"Tailored Photoelastomers as Biocompatible Blood Vessel Substitutes";
Poster: International Workshop on Biomacromolecules 2008, Stockholm, S; 01.06.2008 - 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts", (2008).
M. Porodec, C. Heller, R. Liska, J. Stampfl, M. Hacker:
"Covalent modification of photo-cross-linkable polymers for bone tissue engineering using a model protein";
Poster: International Workshop on Biomacromolecules 2008, Stockholm, S; 01.06.2008 - 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts", (2008).
S. Baudis, M. Schuster, C. Heller, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"Flexible, Biocompatible Photopolymers as Artificial Vascular Grafts";
Poster: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 61.
C. Dworak, S. Kopeinig, H. Hoffmann, R. Liska:
"Photoinitiating Monomers based on Di- and Trifunctional Acrylates";
Poster: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 76.
A. Gugg, B. Ganster, U. Fischer, N. Moszner, R. Liska:
"Acylgermanium Derivatives as New Visible Light Photoinitiators for Dental Materials";
Poster: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 99.
M. Sandholzer, M. Schuster, R. Liska, C. Turecek, F. Varga, C. Slugovc:
"ROMP Based Macroinitiator-Coinitiator Systems With Improved Migration Stability";
Poster: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 106.
V. Satzinger, V. Schmidt, L. Kuna, C. Palfinger, R. Inführ, R. Liska, J. R. Krenn:
"Rapid prototyping of micro-optics on organic light emitting diodes and organic photo cells by means of two-photon 3D lithography and nano-imprint lithography";
Poster: Photonics Europe 2008 (SPIE), Strasbourg, Frankreich; 07.04.2008 - 10.04.2008; in: "Proc. of SPIE Vol. 6992", (2008), S. 699217-1 - 699217-10.
V. Satzinger, V. Schmidt, L. Kuna, R. Inführ, R. Liska, J. Krenn:
"Rapid prototyping of micro-optics on organic light emitting diodes and organic photo cells by means of two-photon 3D lithography and nano-imprint lithography";
Poster: SPIE Photonics Europe 2008, Strasbourg, F; 07.04.2008 - 11.04.2008; in: "Proceedings of SPIE", (2008).
S. Baudis, M. Schuster, C. Heller, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"Photoelastomere als biokompatible Blutgefäßersatzmaterialien";
Poster: 3. Wiener Biomaterialsymposium, Wien; 19.11.2008 - 21.11.2008; in: "3. Wiener Biomaterialsymposium - Tagungsband", (2008), S. 41.
C. Slugovc, M. Sandholzer, M. Schuster, F. Varga, R. Liska:
"A Romp-based photoinitiator-coinitiator system with improved migration stability";
Poster: International Workshop on Biomacromolecules 2008, Stockholm, S; 01.06.2008 - 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts", (2008).
M. Schuster, C. Turecek, F. Varga, G. Weigel, J. Stampfl, R. Inführ, C. Heller, S. Baudis, R. Liska:
"Fundamental investigations towards a new bone replacement material containing gelatin photopolymers";
Poster: International Workshop on Biomacromolecules 2008, Stockholm, S; 01.06.2008 - 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts", (2008).
C. Heller, M. Schwentenwein, S. Baudis, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"3D Fabrication of new poly(vinyl alcohol) based scaffolds for Tissue Engineering and Regeneration";
Poster: International Workshop on Biomacromolecules 2008, Stockholm, S; 01.06.2008 - 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts", (2008).
M. Höfer, R. Liska:
"Red-shifted Cationic Photoinitiators with selective Cleavage Mechanism";
Poster: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 74.
S. Krivec, R. Liska, H. Lichtenegger:
"Sol-Gel Materials as Carrier for Polymeric Waveguides";
Poster: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 83.
F. Karasu, D. Balta, R. Liska, N. Arsu:
"Photoinitiated polymerization of β-Cyclodextrin/ Methyl Methacrylate Host / Guest complex in the Presence of Water Soluble Photoinitiator";
Poster: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 103.
F. Karasu, C. Dworak, S. Kopeinig, E. Hummer-Koppendorfer, N. Arsu, R. Liska:
"Photoinitiating Monomers based on Diacrylamides";
Poster: 9th Austrian Polymer Meeting, Graz, A; 26.03.2008 - 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts", (2008), S. 107.
C. Turecek, M. Schuster, S. Baudis, R. Liska, J. Stampfl, F. Varga:
"Evaluation of biophotopolymers for bone replacement materials capabe for rapid prototyping";
Poster: XXXIV ESAO Congress, Krems, A; 05.09.2007 - 08.09.2007; in: "The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress", D. Falkenhagen (Hrg.); The International Journal of Artificial Organs, 30 (8) (2007), ISSN: 0391-3988; S. 723.
M. Schuster, C. Turecek, J. Stampfl, F. Varga, R. Liska:
"Biophotopolymers for hard tissue replacement";
Poster: XXXIV ESAO Congress, Krems, A; 05.09.2007 - 08.09.2007; in: "The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress", D. Falkenhagen (Hrg.); The International Journal of Artificial Organs, 30 (8) (2007), ISSN: 0391-3988; S. 705.
C. Heller, N.U Pucher, B. Seidl, R. Liska:
"New cross-conjugated photoinitiators";
Poster: 8th Austrian Polymer Meeting, Linz, Austria; 20.09.2006 - 22.09.2006; in: "8th Austrian Polymer Meeting - Abstracts", (2006), S. 32.
R. Inführ, C. Fritscher, V. Schmidt, L. Kuna, R. Liska, H. Lichtenegger, J. Stampfl:
"Structuring methods capable of building 3D parts with feature resolutions from 50 µm to 100 nm";
Poster: Junior Scientist Conference 2006, Wien; 19.04.2006 - 21.04.2006; in: "Junior Scientist Conference 2006. Proceedings", (2006), ISBN: 3-902463-05-8; S. 131 - 132.
M. Schuster, C. Turecek, A. Mateos, J. Stampfl, F. Varga, R. Liska:
"Evaluation of biocompatible Photopolymers for Rapid Prototyping of Bone Substitutes";
Poster: 2nd Stipomat Workshop, Seggau, Austria; 23.10.2006 - 25.10.2006; in: "2nd Stipomat Workshop - Book of Abstracts", (2006), S. P17.
N. Pucher, C. Heller, B. Seidl, L. Kuna, A. Haase, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"New Initiators for Two-Photon Photopolymerization";
Poster: 8th Austrian Polymer Meeting, Linz; 20.09.2006 - 22.09.2006; in: "8th Austrian Polymer Meeting - The Chain of Knowledge - From Catalyst to Application", (2006).
M. Schuster, C. Turecek, B. Kaiser, F. Varga, J. Stampfl, R. Liska:
"Biophotopolymers for Rapid Prototyping of Cellular Bone Replacement Materials";
Poster: Junior Scientist Conference, Wien; 19.04.2006 - 21.04.2006; in: "Junior Scientist Conference 2006 - Proceedings", (2006), ISBN: 3-902463-05-8; S. 173 - 174.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Nonostructured silica/polymer-monoliths";
Poster: ISOSXIV 3rd European Organosilicon Days, Würzburg, Deutschland; 31.07.2006 - 02.08.2006; in: "ISOSXIV 3rd European Organosilicon Days - Abstracts", (2006), S. P071.
M. Schuster, C. Turecek, T. Verdianz, J. Stampfl, F. Varga, R. Liska:
"Development of Biodegradable Photopolymers";
Poster: 2nd Stipomat Workshop, Seggau, Austria; 23.10.2006 - 25.10.2006; in: "2nd Stipomat Workshop - Book of Abstracts", (2006), S. P16.
R. Inführ, H. Lichtenegger, C. Fritscher, J. Stampfl, R. Liska:
"3D Lithography of organo-soluble mold materials";
Poster: 7th Austrian Polymer Meeting, Graz, Austria; 04.07.2005 - 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program", (2005), S. 67.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska:
"TEMPLATING OF ORGANIC/INORGANIC HYBRID MATERIALS";
Poster: E-MRS 2005 Spring Meeting, Strasbourg, France; 31.05.2005 - 03.06.2005; in: "E-MRS 2005 Spring Meeting", (2005), S. I - 28/54.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, R. Inführ, S. Seidler:
"Templating of organic/inorganic hybrid materials";
Poster: EMRS Spring Meeting 2005, Strasbourg, France; 31.05.2005 - 03.06.2005; in: "European Materials Research Society Spring Meeting E-MRS 2005 - Scienific Programme", (2005), S. I -28/54.
R. Liska, K. Kalinyaprak-Icten, B. Seidl:
"New insights into the photochemistry of cross-conjugates photoinitiators";
Poster: 7th Austrian Polymer Meeting, Graz, Österreich; 04.07.2005 - 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program", (2005), S. 71.
M. Schuster, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"Acrylamide-based Biophotopolymers for Bone Tissue Engineering";
Poster: 7th Austrian Polymer Meeting, Graz, Österreich; 04.07.2005 - 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program", (2005), S. 69.
R. Inführ, R. Liska, H. Lichtenegger, C. Fritscher, J. Stampfl, N. Hüsing:
"3D Lithography of Organo-Soluble Mold Materials for Sol-Gel Nanocomposites";
Poster: Radtech Europe 2005: Exhibition and Conference, Barcelona; 18.10.2005 - 20.10.2005; in: "RadTech Europe 2005 Conference Proceedings Volume II", Radtech Europe Association, (2005), ISBN: 3-87870-330-9; S. 487 - 492.
M. Schuster, S. Chen, R. Liska, C. Turecek, F. Varga, J. Stampfl:
"Photopolymerizable Biopolymers for Rapid Prototyping of Cellular Bone Replacement Materials";
Poster: Radtech Europe 2005: Exhibition and Conference, Barcelona; 18.10.2005 - 20.10.2005; in: "RadTech Europe 2005 Conference Proceedings Volume II", (2005), S. 479 - 486.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"NANOSTRUCTURED SILICA/POLYMER-MONOLITHS";
Poster: ISOS XIV, 14th International Symposium on Organosilicon Chemistry; 3rd European Organosilicon Days, Würzburg, Germany; 31.07.2005 - 05.08.2005; in: "ISOS XIV, 14th International Symposium on Organosilicon Chemistry", (2005), S. 158.
M. Schuster, S. Chen, R. Liska, M. Rumpler, C. Turecek, F. Varga, J. Stampfl:
"Development of Biodegradable Photopolymers for Bone Tissue Engineering";
Poster: Radtech Europe 2005: Exhibition and Conference, Barcelona; 18.10.2005 - 20.10.2005; in: "RadTech Europe 2005 Conference Proceedings Volume II", (2005), S. 365 - 372.
S. Kopeinig, R. Liska:
"Benzophenone as covalently bound sensitizer for α-cleavable Photoinitiatiators";
Poster: 7th Austrian Polymer Meeting, Graz, Österreich; 04.07.2005 - 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program", (2005), S. 70.
R. Liska, G. Ullrich, D. Herzog, P. Burtscher, N. Moszner:
"Activated camphorquinones as photoinitiators";
Poster: 228th ACS National Meeting, Philadelphia, USA; 22.08.2004 - 26.08.2004; in: "228th ACS Natinal Meeting Meeting Abstract", (2004), S. POLY-323.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of Bio-inspired Silica Composites";
Poster: MRS Fall Meeting, Boston, USA; 29.11.2004 - 03.12.2004; in: "MRS Fall Meeting 2004 - Program & Exhibit Guide", (2004), S. 729.
R. Liska, B. Seidl, G. Grabner:
"Laser Flash Photolysis investigations of pyridine ketones";
Poster: 228th ACS National Meeting, Philadelphia, USA; 22.08.2004 - 26.08.2004; in: "228th ACS Natinal Meeting Meeting Abstract", (2004), S. POLY-326.
R. Liska, F. Schwager, R. Cano Vives, J. Stampfl:
"New photopolymers for Rapid Prototyping of cellular structures";
Poster: 228th ACS National Meeting, Philadelphia, USA; 22.08.2004 - 26.08.2004; in: "228th ACS Natinal Meeting Meeting Abstract", (2004), S. POLY-327.
B. Seidl, D. Herzog, G. Grabner, R. Liska:
"A Cleavable Photoinitiators with Reduced Oxygen Sensitivity";
Poster: RadTech Europe 2003, Berlin, Germany; 03.11.2003 - 05.11.2003; in: "RadTech Europe 2003 Conference Proceedings", (2003), ISBN: 3-87870-152-7; S. 1011 - 1016.
R. Liska:
"Dramatic Enhancement in Sensitizers Effects for Free Radical Photoinitiators";
Poster: RadTech Europe 2003, Berlin, Germany; 03.11.2003 - 05.11.2003; in: "RadTech Europe 2003 Conference Proceedings", (2003), ISBN: 3-87870-152-7; S. 947 - 952.
B. Seidl, R. Liska, H. Gruber, G. Grabner:
"Laser flash photolysis of pyridine ketones";
Poster: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium, Vienna, Austria; 15.09.2003 - 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ", (2003), S. 126.
B. Seidl, D. Herzog, G. Grabner, R. Liska:
"Photochemistry and photophysics of heterocyclic ketones";
Poster: 10th Blue Danube Symposium on Heterocyclic Chemistry, Vienna, Austria; 03.09.2003 - 06.09.2003; in: "10th Blue Danube Symposium on Heterocyclic Chemistry", (2003), ISBN: 80-227-1938-2; S. PO-163.
A. Liska, H. Wölfle, R. Liska, S. Knaus:
"Photopolymerization of Maleimide-1,3-Diketones";
Poster: RadTech Europe 2003, Berlin, Germany; 03.11.2003 - 05.11.2003; in: "RadTech Europe 2003 Conference Proceedings", (2003), ISBN: 3-87870-152-7; S. 939 - 944.
B. Seidl, R. Liska:
"New Coinitiator-free Benzophenone Derived Photoinitiator";
Poster: RadTech Europe 2003, Berlin, Germany; 03.11.2003 - 05.11.2003; in: "RadTech Europe 2003 Conference Proceedings", (2003), ISBN: 3-87870-152-7; S. 1001 - 1007.
G. Ullrich, D. Herzog, R. Liska, H. Gruber, P. Burtscher, N. Moszner:
"Synthesis and photoactivity of new camphorquinone derivatives";
Poster: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium, Vienna, Austria; 15.09.2003 - 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ", (2003), S. 131.
B. Seidl, R. Liska, H. Gruber:
"Benzophenone based Ynones as photoinitiators";
Poster: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium, Vienna, Austria; 15.09.2003 - 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ", (2003), S. 125.
T. Verdianz, R. Liska, H. Gruber, H. Simburger:
"Surface modification of polyimides for electric motor manufacture";
Poster: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium, Vienna, Austria; 15.09.2003 - 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ", (2003), S. 165.
R. Liska, D. Herzog, B. Seidl, N. Fuß:
"New Chromophors for alpha-Cleavage Photoinitiators in Free Radical Polymerization";
Poster: XIXth IUPAC Symposium on Photochemistry, Budapest, Hungary; 14.07.2002 - 19.07.2002; in: "XIXth IUPAC Symposium on Photochemistry Book of Abstracts", (2002), ISBN: 9639319228; S. 312 - 313.
K. Lisak, R. Liska, S. Knaus, J. Wendrinsky:
"Photochemical Surface Modification of Polyfines";
Poster: XIXth IUPAC Symposium on Photochemistry, Budapest, Hungary; 14.07.2002 - 19.07.2002; in: "XIXth IUPAC Symposium on Photochemistry Book of Abstracts", (2002), ISBN: 9639319228; S. 311.
R. Liska, K. Lisak, B. Seidl, N. Fuß:
"Hydroxyalkylphenone Based Ynones as New alpha-Cleavable Photoinitiators in Free Radical Polymerization";
Poster: 10th"Tihany" Symposium on Radiation Chemistry, Sopron, Hungary; 31.08.2002 - 05.09.2002; in: "10th"Tihani" Symposium on Radiation Chemistry - Program and Abstracts", (2002).
Keynote Lecture (with Proceedings)
R. Liska:
"Thiol-ene polymerization of biocompatible monomers in additive manufactoring technology";
Hauptvortrag: Austrian - Slovenian Polymer Meeting - ASPM 2013, Bled (eingeladen); 03.04.2013 - 05.04.2013; in: "The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013", M. Zigon, T. Rajsp (Hrg.); (2013), ISBN: 978-961-269-992-5; S. 7 - 8.
R. Liska:
"Thiol-ene polymerization of biocompatible photopolymers";
Hauptvortrag: European Symposium of Photopolymer Science - ESPS 2012, Torino (eingeladen); 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012).
M. Hatzenbichler, R. Felzmann, S. Gruber, G. Mitteramskogler, P. Tesavibul, J. Stampfl, R. Liska:
"Additive Manufacturing of high performance ceramic structures";
Hauptvortrag: 4m 2012, Wien; 09.10.2012 - 11.10.2012; in: "Multi-material Micro Manufacture", H. Noll, N. Adamovic, S. Dimov (Hrg.); Research Publishing, (2012), ISBN: 978-98107-3353-7; S. 16 - 19.
R. Liska:
"Photopolymerization and additive manufacturing technologies";
Hauptvortrag: 4th Bratislava Young Polymer Scientists workshop, Bratislava (eingeladen); 01.10.2012 - 05.10.2012; in: "4th Bratislava Young Polymer Scientists workshop", (2012), ISBN: 978-80-970923-2-0; S. 25.
A. Ovsianikov, J. Torgersen, X.H. Qin, Z. Li, S Mühleder, W Holnthoner, R. Liska, J. Stampfl:
"Engineering 3D cell-culture matrices with femtosecond laserinduced photochemistry";
Hauptvortrag: 5. Wiener Biomaterialsymposium, Wien (eingeladen); 19.11.2012 - 21.11.2012; in: "Abstracts 5th Biomaterialsymposium Vienna", (2012), S. 15 - 16.
R. Liska:
"3D Photopolymerization";
Hauptvortrag: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010, Leoben (eingeladen); 08.09.2010 - 10.09.2010; in: "Book of Abstracts", (2010), S. 28.
J. Stampfl, C. Heller, M. Schwentenwein, G. Russmüller, F. Varga, R. Liska:
"Biophotopolymers for stereolithography and two-photon lithography";
Hauptvortrag: World conference on regenerative medicine, Leipzig (eingeladen); 29.10.2009 - 31.10.2009; in: "Regenerative Medicine", F. Emmrich (Hrg.); Future Medicine, 4 (6) (2009), ISSN: 1746-0751; S. S58 - S59.
Keynote Lecture (Proceedings published as CD or Online)
C. Dworak, S. Kopeinig, H. Hoffmann, R. Liska:
"Hydroxylamine-based monomers";
Hauptvortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 8 S.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of Bio-inspired Silica Composites";
Hauptvortrag: MRS Fall Meeting 2004, Boston (USA); 29.11.2004 - 03.12.2004; in: "2004 MRS Fall Meeting", MRS, http://lucy.mrs.org/meetings/fall2004/abstracts/f04_abstract_ee.pdf (2004), Paper-Nr. EE 9.15, 1 S.
Talk (Proceedings published as CD or Online)
T. Koch, F. R. Kogler, R. Potzmann, U. Schubert, S. Krivec, R. Liska, H. Lichtenegger, S. Seidler:
"Charakterisierung des mechanischen Verhaltens von organisch-anorganischen Hybridwerkstoffen mittels Eindruckprüfungen";
Vortrag: 13. Problemseminar Deformation und Bruchverhalten von Kunststoffen, Halle-Merseburg; 29.06.2011 - 01.07.2011; in: "13. Problemseminar Deformation und Bruchverhalten von Kunststoffen", (2011), 5 S.
J. Stampfl, S. Gruber, R. Felzmann, S. Springer, R. Liska:
"Lithographiebasierte Fertigung keramischer Bauteile";
Vortrag: RapidTech 2011, Erfurt; 24.05.2011 - 25.05.2011; in: "Fachmesse und Anwendertagung für Rapid-Technologie", A. Gebhardt (Hrg.); (2011), Paper-Nr. Anwendertagung 5/2, 4 S.
J. Stampfl, G. Mitteramskogler, S. Springer, S. Gruber, A. Ovsianikov, R. Liska:
"Lithography-based Additive Manufacturing of Cellular Ceramic and Composite Structures";
Vortrag: Euromat 2011, Montpellier; 12.09.2011 - 15.09.2011; in: "Euromat 2011", (2011), Paper-Nr. B33-O21H, 1 S.
C. Heller, M. Schwentenwein, F. Varga, R. Liska, J. Stampfl:
"Biocompatible and biodegradable photopolymers for microstereolithography";
Vortrag: 5th International Congress on Laser Advanced Materials Processing, Kyoto (eingeladen); 29.06.2009 - 02.07.2009; in: "Proceedings of LAMP2009", I. Miyamoto (Hrg.); Japan Laser Processing Society, Osaka (2009), Paper-Nr. #09-092, 5 S.
R. Inführ, J. Stampfl, S. Krivec, R. Liska, H. Lichtenegger, V. Satzinger, V. Schmidt, N. Matsko, W. Grogger:
"3D-structuring of optical waveguides with two photon polymerization";
Vortrag: 2009 MRS Spring Meeting, San Francisco, USA; 14.04.2009 - 17.04.2009; in: "Material Systems and Processes for Three-Dimensional Micro- and Nanoscale Fabrication and Lithography", S. Kuebler, V. Milam (Hrg.); 1179E (2009), Paper-Nr. 1179-BB01-07, 7 S.
C. Heller, M. Schwentenwein, S. Baudis, R. Thaler, F. Varga, J. Stampfl, R. Liska:
"3D Fabrication of new poly(vinyl alcohol) based Scaffolds for Tissue Engineering";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 7 S.
J. Stampfl, C. Heller, M. Schwentenwein, S. Baudis, F. Varga, R. Liska:
"Entwicklung nicht-toxischer Biophotopolymere für die generative Fertigung";
Vortrag: 12. Problemseminar Deformation und Bruch, Merseburg; 24.06.2009 - 26.06.2009; in: "Tagungsband Deformation und Bruch", W. Grellmann (Hrg.); (2009), 4 S.
M. Höfer, S. Landertshamer, R. Liska:
"Cationic Photoinitiators based on Phenylethynyl onium salts";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 9 S.
R. Liska, H. Bergmeister, S. Baudis, C. Dworak, C. Heller, N. Moszner, M. Porodec, N.U Pucher, G. Russmüller, V. Schmidt, M. Schulz-Siegmund, M. Schwentenwein, J. Stampfl, F. Varga, G. Weigel:
"Monomers and Photoinitiators for Biomedical Applications";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 8 S.
A. Gugg, B. Ganster, D. Neshchadin, M. Griesser, C. Hametner, R. Saf, N. Moszner, G. Gescheidt, R. Liska:
"Mechanistic Investigations on Germanium-based Photoinitiators";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 9 S.
M. Schwentenwein, C. Heller, J. Stampfl, R. Liska:
"Rapid Prototyping of Biocompatible and Biodegradable monomers";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 8 S.
M. Schwentenwein, C. Heller, J. Stampfl, F. Varga, R. Liska:
"Biocompatible and Biodegradable monomers based on Oligoethylene glycols with different polymerizable groups";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 6 S.
S. Baudis, M. Schwentenwein, T. Pulka, B. Steyrer, H. Wilhelm, G. Weigel, H. Bergmeister, J. Stampfl, R. Liska:
"Studies on the mechanical behaviour of Photoelastomers for Vascular Tissue Regeneration.";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 6 S.
C. Heller, M. Schwentenwein, M. Porodec, M. Schulz-Siegmund, J. Stampfl, F. Varga, R. Liska:
"Poly(vinyl alcohol) based monomers for lithography-based 3D fabrication";
Vortrag: World Congress on Medical Physics and Biomedical Engineering, München (eingeladen); 07.09.2009 - 12.09.2009; in: "IFMBE Proceedings", O. Dössel, W. Schlegel (Hrg.); 25 (2009), ISBN: 978-3-642-03897-6; 4 S.
C. Dworak, S. Jauk, R. Liska, D. Neshchadin, A. Rosspeintner, G. Gescheidt:
"Photoinitiators with β-phenylogous cleavage";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 7 S.
C. Heller, M. Schwentenwein, R. Liska, J. Stampfl, F. Varga, M. Porodec, M. Schulz-Siegmund, G. Russmüller:
"New 3D-Biophotopolymers with Selective Surface-cell Interactions for Regnerative Medicine";
Vortrag: MRS Fall Meeting 2009, Boston, MA, USA; 30.11.2009 - 03.12.2009; in: "E-MRS 2008 spring meeting", (2009).
C. Dworak, S. Kopeinig, F. Karasu, E. Hummer-Koppendorfer, R. Liska:
"Self-Initiating Monomers based on Acrylamides";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 7 S.
N.U Pucher, A. Rosspeintner, S. Kontur, A. Ajami, W. Husinsky, G. Gescheidt, J. Stampfl, R. Liska:
"Photochemistry and Photophysics of Two-Photon Initiators";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 6 S.
N.U Pucher, S. Krivec, N. Matsko, N. Galler, T. Koch, V. Satzinger, V. Schmidt, W. Grogger, H. Lichtenegger, R. Liska:
"Photopolymerizable Waveguides in Flexible Sol-Gel Cladding Materials";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 6 S.
J. Kumpfmüller, N.U Pucher, K. Stadlmann, J. Stampfl, R. Liska:
"Photo-induced Waveguide formation in Polysiloxanes";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 7 S.
C. Dworak, F. Varga, R. Liska:
"Phosphorus-based Monomers for radical polymerization";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 8 S.
N.U Pucher, A. Rosspeintner, V. Satzinger, V. Schmidt, G. Gescheidt, J. Stampfl, R. Liska:
"Evaluation of Triple Bond Containing Photoinitiators for the Two-Photon Induced Photopolymerization Process";
Vortrag: RadTech Europe 2009, Nizza, FR; 14.10.2009 - 15.10.2009; in: "Radtech Europe 2009, Proceedings", (2009), 6 S.
J. Stampfl, C. Heller, M. Schuster, S. Baudis, J. Homa, R. Liska:
"Biofunktionelle Photopolymere für die generative Fertigung";
Vortrag: Rapidtech, Erfurt/Deutschland; 27.05.2008 - 28.05.2008; in: "Tagungsband", (2008), Paper-Nr. AT-Session5-V2, 4 S.
M. Sandholzer, M. Schuster, R. Liska, C. Turecek, F. Varga, F. Stelzer, C. Slugovc:
"Ring opening metathesis polymers as macroinitiator-coinitiator systems for the photopolymerization of acrylates";
Vortrag: 234th ACS National Meeting, Boston, USA; 19.08.2007 - 23.08.2007; in: "Abstracts of Papers", (2007), 2 S.
B. Ganster, U. Fischer, V. Rheinberger, N. Moszner, R. Liska:
"New visible light PIs for Dental Materials";
Vortrag: RadTech Europe 2007, Vienna, A (eingeladen); 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings", (2007), 8 S.
M. Höfer, N. Moszner, R. Liska:
"Singlet Oxygen Reactive Components for Radiation Curable Formulations";
Vortrag: RadTech Europe 2007, Vienna, A (eingeladen); 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings", (2007), 7 S.
M. Schuster, C. Turecek, J. Stampfl, F. Varga, R. Liska:
"Biofunctional Photopolymers for Micro-Stereolithography";
Vortrag: 8th International Symposium on Laser Precision Microfabrication, LPM 2007, Vienna, A; 24.04.2007 - 28.04.2007; in: "Proceedings of LPM2007", (2007), Paper-Nr. 07-72, 5 S.
M. Schuster, M. Sandholzer, C. Turecek, F. Varga, C. Slugovc, R. Liska:
"Synthesis and Evaluation of Eosin-based Photoinitiators with Improved Migration Stability";
Vortrag: RadTech Europe 2007, Vienna, A (eingeladen); 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings", (2007), 7 S.
R. Liska, B. Ganster, M. Höfer, C. Heller, S. Kopeinig, E. Hummer-Koppendorfer, N. Moszner:
"Photoinitiators with bathochromic shift";
Vortrag: RadTech Europe 2007, Vienna, A (eingeladen); 13.11.2007 - 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings", (2007), 7 S.
J. Stampfl, M. Schuster, C. Heller, R. Liska, C. Turecek, F. Varga:
"Entwicklung und mechanische Charakterisierung bioabbaubarer Photopolymere";
Vortrag: 11. Problemseminar Deformation und Bruchverhalten von Kunststoffen, Merseburg, Deutschland; 20.06.2007 - 22.06.2007; in: "Tagungsband", (2007), 6 S.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, R. Inführ, T. Koch, S. Seidler:
"Hierarchisch strukturiertes Siliziumdioxid und seine mechanischen Eigenschaften";
Vortrag: 2. Wiener Biomaterialsymposium, TU Wien; 22.11.2006 - 24.11.2006; in: "2. Wiener Biomaterialsysmposium", (2006), 9 S.
M. Schuster, R. Liska, F. Varga, C. Turecek:
"Gelatin-based Biophotopolymers";
Vortrag: 2. Wiener Biomaterialsymposium, Wien, Österreich; 22.11.2006 - 24.11.2006; in: "2. Wiener Biomaterialsymposium - CD", (2006), 7 S.
L. Spoljaric-Lukacic, R. Saf, R. Liska, S. Knaus:
"Peroxide-initiated grafting of maleimides onto hydrocarbon substrates";
Vortrag: European Polymer Congress 2005, Moskau, Russland; 27.06.2005 - 01.07.2005; in: "CD European Polymer Congress 2005", (2005), Paper-Nr. o.1.3.1 Ref.1946, 3 S.
Poster Presentation
X.H. Qin, B. Husar, J. Torgersen, S. Mühleder, H. Redl, W. Holnthoner, J. Stampfl, A. Ovsianikov, R. Liska:
"Two-photon polymerization for biodegradable 3D hydrogels scaffolds";
Poster: RadTech Asia 2013, Shanghai; 20.05.2013 - 24.05.2013.
S. Baudis, Z. Tomasikova, X.H. Qin, P. Gruber, M. Markovic, J. Stampfl, A. Ovsianikov, R. Liska:
"Cell Encapsulation by Microfabrication with Hyaluronic Acid based Hydrogel Precursors";
Poster: International Conference on Biofabrication 2015, Domplein 29, 3512 JE Utrecht; 07.11.2015 - 09.11.2015.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: Junior Euromat 2004, Lausanne, Switzerland; 06.09.2004 - 09.09.2004.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: Micro-Mechanical Properties of Biomaterials, Tomar, Portugal; 26.09.2004 - 30.09.2004.
S. Ligon, B. Husar, S. Baudis, F. Nehl, A. Nigisch, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Improved elastomeric materials for CAD/CAM generation of vascular structures in soft tissue replacement therapies";
Poster: The 3rd TERMIS World Congress 2012, Vienna; 05.09.2012 - 08.09.2012.
D. Herzog, R. Liska:
"Electron poor heterocyclic type I photoinitiators";
Poster: RadTech Europe 2001, Basel, Schweiz; 08.10.2001 - 10.10.2001.
J. Stampfl, J. Torgersen, A. Ovsianikov, X.H. Qin, L. Zhiquan, V. Mironov, R. Liska:
"Photo-sensitive Biocompatible Hydrogels Structuring Extracellular Environments by Two Photon Polymerisation";
Poster: 2012 MRS Spring Meeting & Exhibit, San Francisco; 09.04.2012 - 13.04.2012.
K. Seidler, S. Baudis, S. Ligon, C. Grasl, M. Arras, H. Schima, H. Bergmeister, B. Winter, T. Koch, J. Stampfl, R. Liska:
"Biocompatible and biodegradable thermoplastic urethane Elastomers for electrospinning of vascular grafts";
Poster: 1st P2M Networking Conference, Obernai, F; 11.11.2011 - 14.11.2011.
S. Gäbler, T. Koch, J. Stampfl, S. Seidler, C. Heller, S. Baudis, R. Liska, R. Weidisch:
"Determination of the Viscoelastic Properties of Hydrogels based on Polyethylene Glycol Diacrylate (PEG-DA)";
Poster: Materials Science and Engineering - MSE 2008, Nürnberg; 01.09.2008 - 04.09.2008.
X.H. Qin, C. Heller, M. Schwentenwein, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"New Bio-photopolymers with good biocompatibility for Tissue Engineering";
Poster: Materials Science and Engineering, Darmstadt, Germany; 24.08.2010 - 26.08.2010.
B. Husar, A. Mautner, C. Heller, M. Schwentenwein, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl esters and vinyl carbonates: low cytotoxic alternatives to (meth)acrylates";
Poster: ESF Research Networking Programme on Precision Polymer Materials (P2M), San Feliu de Guixols; 24.09.2012 - 28.09.2012.
N.U Pucher, C. Heller, B. Seidl, R. Inführ, L. Kuna, A. Haase, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"New alkyne-based initiators for single- ad two-photon-induced photopolymerization";
Poster: 2007 MRS Spring Meeting, San Francisco; 09.04.2007 - 13.04.2007.
C. Heller, C. Dworak, R. Liska, F. Varga:
"Biocompatible Phorphorus-based Monomers for Radical Polymerization";
Poster: MRS Fall Meeting 2009, Boston, MA, USA; 30.11.2009 - 03.12.2009.
R. Inführ, Ch. Fritscher, V. Schmidt, L. Kuna, R. Liska, H. Lichtenegger, J. Stampfl:
"Structuring Methods Capable of Building 3D Parts with Feature Resolutions from 50 µm to 100 nm";
Poster: Junior Euromat, Lausanne, Switzerland; 04.09.2006 - 08.09.2006.
R. Inführ, R. Liska, H. Lichtenegger, Ch. Fritscher, J. Stampfl, N. Hüsing:
"3D Lithography of Organo-Soluble Mold Materials for Sol-Gel Nanocomposites";
Poster: RadTech Europe 2005, Barcelona, Spain; 18.10.2005 - 20.10.2005.
B. Seidl, R. Liska:
"2-tert-Butylacrylonitrile, a Non-Polymerizable Monomer for the Investigation of Initiation Mechanism";
Poster: RadTech Europe 2005, Barcelona, Spain; 18.10.2005 - 20.10.2005.
D. Bomze, V. Schwarz, B. Husar, X.H. Qin, P. Gruber, A. Ovsianikov, J. Stampfl, R. Liska:
"Novel low-toxic PVA based hydrogel precursors for tissue engineering based on thiol-ene crosslinking";
Poster: P2M Winter School, Zakopane; 13.01.2014 - 17.01.2014.
G. Ullrich, R. Liska, P. Burtscher, U. Salz, N. Moszner:
"Investigation of Phenylglycine Derivatives as Coinitiators";
Poster: RadTech Europe 2005, Barcelona, Spain; 18.10.2005 - 20.10.2005.
G. Ullrich, S. Jauk, R. Liska, P. Burtscher, N. Moszner:
"How to Avoid the Back Electron Transfer in Type II Photoinitiators";
Poster: RadTech Europe 2005, Barcelona, Spain; 18.10.2005 - 20.10.2005.
A. Gugg, C. Gorsche, N. Moszner, R. Liska:
"Addition fragmentation chain transfer agents for controlled radical photopolymerization";
Poster: ESF Research Networking Programme on Precision Polymer Materials (P2M), San Feliu de Guixols; 24.09.2012 - 28.09.2012.
C. Gorsche, M. Griesser, T. Koch, N. Moszner, R. Liska:
"The potential of β-allyl sulfone-based dimethacrylate networks";
Poster: ESF Research Networking Programme on Precision Polymer Materials (P2M), Lacanau, Lacanau; 26.05.2015 - 29.05.2015.
S. Ligon, M. Griesser, D. Neshchadin, A. Rosspeintner, V. Gorelik, B. Ganster, R. Saf, G. Gescheidt, N. Moszner, R. Liska:
"Advances in long wavelength initiators for photocurable dental adhesives and restoratives";
Poster: RadTech Asia 2013, Shanghai; 20.05.2013 - 24.05.2013.
R. Gmeiner, B. Steyrer, A. Samusjew, A. Mautner, R. Liska, J. Stampfl:
"Stereolithographic Manufacturing of Biodegradable Photopolymers";
Poster: Polymer Processing Society Conference 2015, Graz; 21.09.2015 - 25.09.2015.
S. Benedikt, K. Dietliker, H. Grützmacher, M. Markovic, N. Moszner, A. Ovsianikov, R. Liska:
"Characterization and Comparison of Next Generation Water-Soluble Photoinitiators";
Poster: International Conference on Biofabrication 2015, Utrecht, Netherlands; 07.11.2015 - 09.11.2015.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: Micro-mechanical properties of biomaterials, ECI-Conference, Tomar, Portugal; 26.09.2004 - 30.09.2004.
H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: EUROMAT 2004, Lausanne, Schweiz; 06.09.2004 - 09.09.2004.
L. Spoljaric-Lukacic, R. Saf, R. Liska, S. Knaus:
"Free Radical Grafting of Maleimides onto Polifines: Studie on Model Compounds";
Poster: World Polymer Congress MACRO 2004, Paris, France; 04.07.2004 - 09.07.2004.
P. Müller, S. Pantschov, R. Liska, S. Knaus:
"Synthesis and Grafting of Novel Hindered Amine Light Stabilizers onto Polypropylene";
Poster: 5. Österreichische Polymertage, Leoben; 12.09.2001 - 14.09.2001.
N. Fuß, R. Liska:
"New type I photoinitiators based on ynone derivatives";
Poster: RadTech Europe 2001, Basel, Schweiz; 08.10.2001 - 10.10.2001.
B. Husar, A. Mautner, C. Heller, M. Schwentenwein, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Utilization of photopolymerization of new low toxic vinyl monomers in bone tissue engineering";
Poster: The 3rd TERMIS World Congress 2012, Vienna; 05.09.2012 - 08.09.2012.
A. Mautner, X.H. Qin, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl carbonates, a new generation of low toxic monomers";
Poster: 1st P2M Networking Conference, Obernai, F; 11.11.2011 - 14.11.2011.
N. Fuß, R. Liska:
"New Enon- and Inon-besed Type I Photoinitiators";
Poster: 5. Österreichische Polymertage, Leoben; 12.09.2001 - 14.09.2001.
C. Turecek, M. Schuster, F. Varga, R. Liska, B. Kaiser, J. Stampfl, K. Klaushofer:
"Evaluation and influence of photopolymers, capable for rapid prototyping, on the adhesion, proliferation and differentiation of osteoblasts";
Poster: 33rd European Symposium on Calcified Tissues, Prag; 10.05.2006 - 14.05.2006.
R. Inführ, N.U Pucher, H. Lichtenegger, R. Liska, V. Schmidt, V. Satzinger, J. Stampfl:
"Refractive Index Patterning of Flexible Waveguide Materials by Two-Photon Polymerization";
Poster: Materials Science and Engineering - MSE 2008, Nürnberg; 01.09.2008 - 04.09.2008.
M. Porodec, C. Heller, R. Liska, J. Stampfl, M. Hacker, M. Schulz-Siegmund:
"Covalent Modification of Photo-cross-linkable Polymers for Bone Tissue Engineering Using a Model Protein";
Poster: International Workshop on Biomacromolecules 2008 - Renewable, Degradable and Biomedical Polymers, Stockholm/ Schweden; 01.06.2008 - 04.06.2008.
Z. Li, M. Siklos, N.U Pucher, K. Cicha, A. Ajami, W. Husinsky, J. Stampfl, R. Liska:
"Synthesis and Structure-Activity Relationship of Several Novel Two-Photon Initiators based on a D-pi-A-pi-D Chromophore";
Poster: Materials Science and Engineering, Darmstadt, Germany; 24.08.2010 - 26.08.2010.
S. Ligon, B. Husar, S. Baudis, K. Seidler, G. Weigel, C. Grasl, H. Bergmeister, R. Liska:
"Electrospun thermoplastic polyurethane vascular grafts with controllable degradation";
Poster: ESF Research Networking Programme on Precision Polymer Materials (P2M), San Feliu de Guixols; 24.09.2012 - 28.09.2012.
J. Kumpfmüller, R. Inführ, K. Stadlmann, K. Cicha, V. Satzinger, J. Stampfl, R. Liska:
"Flexible Optical WaveGuides via Two-Photon Polymerization";
Poster: Materials Science and Engineering, Darmstadt, Germany; 24.08.2010 - 26.08.2010.
M. Schuster, C. Turecek, F. Varga, H. Lichtenegger, J. Stampfl, R. Liska:
"Development of bone replacement materials using stereolithography";
Poster: MRS Spring Meeting, an Francisco; 09.04.2007 - 13.04.2007.
R. Inführ, C. Fritscher, V. Schmidt, L. Kuna, R. Liska, H. Lichtenegger, J. Stampfl:
"Structuring Methods Capable of Building 3D Parts with Feature Resolutions from 50 µm to 100 nm";
Poster: Junior Euromat 2006, Lausanne, Switzerland; 04.09.2006 - 06.09.2006.
A. Gugg, B. Ganster, N. Moszner, R. Liska:
"Dental Composite Materials Based on Visible Light Photopolymerization.";
Poster: MRS Fall Meeting 2009, Boston, MA, USA; 30.11.2009 - 03.12.2009.
M. Schuster, S.X. Chen, R. Liska, C. Turecek, F. Varga, J. Stampfl:
"Photopolymerizable Biopolymers for Rapid Prototyping of Cellular Bone Repleacement Meterials";
Poster: RadTech Europe 2005, Barcelona, Spain; 18.10.2005 - 20.10.2005.
M. Schuster, S.X. Chen, R. Liska, M. Rumpler, C. Turecek, F. Varga, J. Stampfl:
"Development of Biodegradable Photopolymers for Bone Tissue Engineering";
Poster: RadTech Europe 2005, Barcelona, Spain; 18.10.2005 - 20.10.2005.
S. Kopeinig, R. Liska:
"Further Covalently Bonded Photoinitiators";
Poster: RadTech Europe 2005, Barcelona, Spain; 18.10.2005 - 20.10.2005.
B. Seidl, K. Kalinyaprak-Icten, G. Ullrich, R. Liska:
"New Cross-Conjugated Photoinitiators";
Poster: RadTech Europe 2005, Barcelona, Spain; 18.10.2005 - 20.10.2005.
Talk
T. Verdianz, R. Liska:
"Grundlegende Untersuchungen zur Oberflächenmodifizierung von Polyimiden";
Vortrag: VA TECH, Weiz (eingeladen); 28.01.2003.
H. Lichtenegger, Ch. Fritscher, J. Stampfl, S. Seidler, N. Hüsing, R. Liska:
"3-D templating of hierarchical materials";
Vortrag: MRS Spring Meeting, San Francisco; 12.04.2004 - 16.04.2004.
R. Liska:
"Wasserlösliche Polymere für den Einsatz in Rapid Prototyping";
Vortrag: Technische Universität Wien - Institut für Werkstoffkunde und Materialprüfung, Wien (eingeladen); 27.08.2003.
K. Lisak, R. Liska, S. Knaus:
"Photochemical Immobilization of Aryl Azides onto Polypropylene Surfaces";
Vortrag: 5. Österreichische Polymertage, Leoben; 12.09.2001 - 14.09.2001.
K. Cicha, Z. Li, K. Stadlmann, J. Torgersen, R. Markut-Kohl, R. Liska, J. Stampfl:
"Fabrication and evaluation of 3D-micro-structures produced using two-photon-induced photopolymerization (TPIP or 2PP) by means of optical assessment and FTIR-spectroscopy";
Vortrag: 16. Tagung Festkörperanalytik, Wien; 04.07.2011 - 06.07.2011.
D. Herzog, R. Liska:
"New concepts for Type I Photoinitiators in Free Radical Polymerization";
Vortrag: 5. Österreichische Polymertage, Leoben; 12.09.2001 - 14.09.2001.
R. Liska:
"Frontal Polymerization and other new concepts in Radical Polymerization";
Vortrag: BASF, Ludwigshafen, D (eingeladen); 07.08.2012.
R. Liska:
"Advanced Biomaterials for 3D-Photopolymerization";
Vortrag: 1st P2M Networking Conference, Obernai, F; 11.11.2011 - 14.11.2011.
R. Liska:
"Photopolymers and Rapid Prototyping";
Vortrag: Beijing University of Technology, Beijing, CN (eingeladen); 10.05.2011.
R. Liska:
"Biocompatible Photopolymers: From Synthesis to in Vivo Studies";
Vortrag: University of Maribor, Maribor (eingeladen); 31.08.2012.
R. Liska:
"Fundamentals in Photopolymerization";
Vortrag: Firma Objet, Rehovot, IL (eingeladen); 07.04.2011 - 08.04.2011.
R. Liska:
"Frontal Polymerization and other new concepts in Radical Polymerization";
Vortrag: Cytec, Brüssel (eingeladen); 12.02.2012.
R. Liska, M. Schuster, R. Inführ, C. Turecek, N.U Pucher, C. Heller, B. Seidl, C. Fritscher, L. Kuna, A. Haase, V. Schmidt, H. Lichtenegger, F. Varga, J. Stampfl:
"Single- and Two-Photon Initiated Polymerization in Rapid Prototyping";
Vortrag: 2007 MRS Spring Meeting, San Francisco, USA (eingeladen); 09.04.2007 - 13.04.2007.
M. Schwentenwein, C. Heller, X.H. Qin, F. Varga, J. Stampfl, R. Liska:
"Additive Manufacturing Technologies for 3D Fabrication of Biocompatible and Biodegradable Photopolymers";
Vortrag: Materials Science and Engineering, Darmstadt, Germany; 24.08.2010 - 26.08.2010.
M. Schuster, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"3D-shaping of biodegradable photopolymers for hard tissue replacement";
Vortrag: EMRS Spring Meeting 2007, Strasbourg, France; 28.05.2007 - 01.06.2007.
R. Liska:
"New Monomers and Initiators for Photopolymerisation";
Vortrag: Firma Durst, Lienz in Osttirol, A (eingeladen); 05.02.2010.
R. Liska:
"Photopolymerisation mittels Ein- und Zwei Photonen";
Vortrag: Projektmeeting Fa. ISOTEC, Reinischkogel (eingeladen); 12.07.2007 - 13.07.2007.
R. Liska:
"Recent Advances in Photopolymerisation";
Vortrag: Firma Huntsman, Basel, CH (eingeladen); 26.11.2009.
R. Liska:
"Photopolymerization: A long known technique in a modern environment - 3D printing of biomaterials";
Vortrag: 27. Internationales H.F. Mark-Symposium 2013, Wien (eingeladen); 07.11.2013.
C. Heller, M. Schwentenwein, J. Stampfl, F. Varga, R. Liska, M. Porodec, M. Schulz-Siegmund, G. Russmüller:
"Additive Manufacturing Technologies for the 3D Fabrication of Biocompatible and Biodegradable Photopolymers.";
Vortrag: MRS Fall Meeting 2009, Boston, MA, USA; 30.11.2009 - 03.12.2009.
M. Schuster, C. Turecek, B. Kaiser, F. Varga, J. Stampfl, R. Liska:
"Biophotopolymers for Rapid Prototyping of Cellular Bone Replacement Materials";
Vortrag: Junior Scientist Conference, Wien; 19.04.2006 - 21.04.2006.
R. Liska:
"Further Projects in the field of Photopolymerization";
Vortrag: Firma Objet, Rehovot, IL; 07.04.2010.
R. Liska:
"Photopolymere - Neue Dentalmaterialien und bioresorbierbarer Knochenersatz";
Vortrag: Informationsveranstaltung: Innovationen für die Medizintechnik, Tu-Wien, A (eingeladen); 18.04.2007.
R. Liska:
"Biophotopolymere für Rapid Prototyping";
Vortrag: Projektmeeting Fa. ISOTEC, Reinischkogel, Steiermark; 16.06.2005.
R. Liska:
"Recent developments in photoinitiators and photopolymerization";
Vortrag: Universität Mulhouse, F-68093 Mulhouse (eingeladen); 22.03.2006.
R. Liska, S. Kopeinig:
"Neue Photoreaktive Gruppen";
Vortrag: Seminar Fa. NBG Coatings, Wien; 20.09.2005.
R. Liska:
"Photoinitiatoren mit funktionellen Gruppen";
Vortrag: EMS Chemie, CH-7013 Domat/Ems (eingeladen); 20.03.2006.
R. Liska, B. Ganster:
"Neue Konzepte für bathochrom verschobene Photoinitiatoren";
Vortrag: Seminar Fa. Ivoclar, Wien; 03.11.2005.
J. Stampfl, R. Liska, M. Spitzbart, S. Fischer, H. Noll:
"3D-Mikrostrukurerung funktionaler Materialien";
Vortrag: Mikrotechniktage Dornbirn 2005, Dornbirn; 22.03.2005 - 23.03.2005.
R. Liska:
"Photopolymere und ihre Anwendungen";
Vortrag: Technische Universität Graz, Graz (eingeladen); 08.03.2005.
P. Sehnal, K. Harper, A. Rose, D. Anderson, A. Green, B. Husar, M. Griesser, R. Liska:
"Novel Phosphine Oxide Photoinitiators";
Vortrag: RadTech USA 2014, Chicago (Rosemont); 12.05.2014 - 14.05.2014.
S. Ligon, M. Tromayer, Z. Li, J. Torgersen, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, J. Stampfl, R. Liska:
"New Developments in Initiators for Two-Photon Polymerization";
Vortrag: RadTech USA 2014, Chicago (Rosemont); 12.05.2014 - 14.05.2014.
B. Husar, A. Mautner, F. Varga, J. Stampfl, R. Liska:
"An overview on low cytotoxic alternatives to (meth)acrylates: vinyl esters and vinyl carbonates";
Vortrag: RadTech USA 2014, Chicago (Rosemont); 12.05.2014 - 14.05.2014.
R. Liska:
"Photopolymerization: A long known technique in a modern environment - 3D printing of biomaterials";
Vortrag: Steinhofer-Vorlesung, Freiburg (eingeladen); 12.05.2014.
R. Liska:
"Photopolymers in digital and restorative dentistry";
Vortrag: Christian Doppler Forum, Bad Blumau (eingeladen); 17.09.2014 - 19.09.2014.
P. Dorfinger, R. Liska, J. Stampfl:
"Toughening of Photopolymers for Stereolithography (SL)";
Vortrag: Polymer Processing Society Conference 2015, Graz; 21.09.2015 - 25.09.2015.
R. Liska:
"Photopolymerization and 3D printing";
Vortrag: Slovak Academy of Sciences, Bratislava (eingeladen); 20.06.2013.
S. Baudis, R. Liska:
"Advanced Photopolymers for High Resolution Addtive Manufacturing";
Vortrag: ADD+IT 2015, Linz (eingeladen); 10.09.2015 - 11.09.2015.
R. Liska:
"3D Printing of a New Generation of Biocompatible and Biodegradable Photopolymers";
Vortrag: Makromolekulares Kolloquium, Freiburg (eingeladen); 25.02.2015 - 27.02.2015.
R. Liska:
"Neue Photopolymere für Rapid Prototyping von zellularen Materialien";
Vortrag: 1. Wiener Biomaterialsymposium, Wien (eingeladen); 04.11.2004 - 05.11.2004.
R. Liska:
"Struktur und Reaktivität von Photoinitiatoren mit neuen Chromophoren";
Vortrag: Institut für Nanostrukturierte Materialien und Photonik, Joanneum Research, Weiz, Österreich (eingeladen); 29.10.2003.
R. Liska:
"Photopolymerization and 3D lithography";
Vortrag: ESF Research Networking Programme on Precision Polymer Materials (P2M), San Feliu de Guixols (eingeladen); 24.09.2012 - 28.09.2012.
A. Ovsianikov, J. Torgersen, X.H. Qin, Z. Li, S Mühleder, W Holnthoner, H. Redl, R. Liska, J. Stampfl:
"Laser fabrication of cell-containing hydrogel constructs";
Vortrag: International Conference on Biofabrication, Manchester; 29.10.2012 - 31.10.2012.
R. Liska:
"New Monomers and Photoinitiators";
Vortrag: Beijing University of Technology, Beijing, CN (eingeladen); 10.05.2011.
C. Schreiber, S. Baudis, C. Grasl, M. Stoiber, I. Walter, R. Plasenzotti, D. Bernhard, R. Liska:
"In-vivo evaluation of new synthetic degradable and non-degradable small diameter vascular grafts";
Vortrag: Vfwf-Universitätsvorlesung, Vienna (eingeladen); 02.12.2011.
R. Liska:
"Photopolymers for biomedical applications";
Vortrag: Beijing University of Technology, Beijing, CN (eingeladen); 10.05.2011.
R. Liska:
"Advanced Monomers and Initiators for radical Photopolymerization";
Vortrag: Institut für Oberflächenmodifizierung, Leipzig (eingeladen); 26.01.2012.
R. Liska:
"New Concepts in Radical Photopolymerization";
Vortrag: BASF, Ludwigshafen, D (eingeladen); 15.12.2011.
R. Liska:
"Biocompatible Photopolymers";
Vortrag: Firma Objet, Rehovot, IL; 07.04.2010.
R. Liska:
"Photopolymerization goes 3D";
Vortrag: FoE Advanced Material Science, Graz; 27.10.2011.
R. Inführ, N.U Pucher, C. Heller, H. Lichtenegger, R. Liska, V. Schmidt, L. Kuna, A. Haase, J. Stampfl:
"Functional Polymers Structured by Two Photon Lithography";
Vortrag: EMRS Spring Meeting 2007, Strasbourg, France; 28.05.2007 - 01.06.2007.
R. Liska:
"Two Photon induced Polymerization: An excellent tool for precise sub- micrometer fabrication of biocompatible photopolymers";
Vortrag: Summer school P2M, Ghent (eingeladen); 25.08.2013 - 28.08.2013.
R. Inführ, J. Stampfl, N. Pucher, H. Lichtenegger, R. Liska, V. Schmidt, L. Kuna, A. Haase:
"Functional Polymers Structured by Two Photon Lithography";
Vortrag: E-MRS European Materials Research Society - Spring Meeting 2007, Strasbourg/ France; 28.05.2007 - 01.06.2007.
R. Liska:
"Photopolymerisation of Biocompatible Materials";
Vortrag: Firma Beiersdorf, Hamburg, D (eingeladen); 15.04.2010.
R. Liska:
"Robert Liska, Photoinitiators and Monomers for Medical Applications";
Vortrag: Photopolymerization Fundamentals 2009, Breckenridge, CO, USA (eingeladen); 21.06.2009 - 24.06.2009.
R. Liska:
"Rapid Prototyping von biokompatiblen und bioabbaubaren Kunststoffen für die Geweberegeneration";
Vortrag: VSVA-Symposium, Wien (eingeladen); 11.11.2013.
R. Liska, N.U Pucher:
"Materials for Two Photon Absorption Photopolymerization";
Vortrag: Projektmeeting Fa. ISOTEC, Reinischkogel; 06.07.2006 - 08.07.2006.
S. Baudis, T. Pulka, B. Steyrer, H. Wilhelm, G. Weigel, H. Bergmeister, J. Stampfl, R. Liska:
"3D-printing of Urethane-based Photoelastomers for Vascular Tissue Regeneration";
Vortrag: MRS Fall Meeting 2009, Boston, MA, USA; 30.11.2009 - 03.12.2009.
R. Liska, C. Pich:
"Additionsreaktionen an funktionellen Polysiloxanen";
Vortrag: Seminar Fa. NBG Coatings, Wien; 20.09.2005.
R. Liska:
"Konzepte und Modifikationen in Typ I und Typ II Photoinitiatoren";
Vortrag: CIBA, Basel (eingeladen); 21.03.2006.
R. Liska, C. Haderer:
"Immobilisierte Fluoreszenzsensoren für die extrakorporale Blutreinigung";
Vortrag: Seminar Fa. Ivoclar, Wien; 03.11.2005.
H. Lichtenegger, R. Liska, J. Stampfl:
"STRUCMAT- Materialien für die Strukturierung mit 2-Photonenlithographie (TPA)";
Vortrag: ISOTEC-Kickoff-Meeting, Reinischkogel, Österreich; 16.06.2005 - 18.06.2005.
R. Liska, M. Höfer:
"Reaktionen mit singulett Sauerstoff";
Vortrag: Seminar Fa. Ivoclar, Wien; 03.11.2005.
C. Gorsche, M. Griesser, C. Hametner, B. Ganster, N. Moszner, D. Neshchadin, A. Rosspeintner, G. Gescheidt, R. Saf, R. Liska:
"New generation of highly efficient long-wavelength photoinitiators for dental restoratives: From research to application";
Vortrag: RadTech USA 2014, Chicago (Rosemont); 12.05.2014 - 14.05.2014.
R. Liska:
"Biofunctional Photopolymers";
Vortrag: 1. Meeting des erweiterten Clusters für Geweberegeneration 2014, Vienna; 13.03.2014.
B. Seidl, K. Kalinyaprak-Icten, R. Liska:
"New Insights into 1,5-Diphenyl 1,4-Diynone as Ohotoinitiator";
Vortrag: RadTech Europe 2005, Barcelona, Spain (eingeladen); 18.10.2005 - 20.10.2005.
S. Ligon, X.H. Qin, P. Esfandiari, Z. Tomasikova, P. Gruber, A. Ovsianikov, R. Liska:
"Advanced Applications of Thiol-Ene Formulations";
Vortrag: RadTech USA 2014, Chicago (Rosemont); 12.05.2014 - 14.05.2014.
B. Husar, S. Ligon, H. Wutzel, H. Hoffmann, R. Liska:
"Experimental Comparison of Various Anti-Oxygen Inhibition Strategies in LED Curing";
Vortrag: RadTech USA 2014, Chicago (Rosemont); 12.05.2014 - 14.05.2014.
R. Liska:
"Biocompatible polymers in tissue engineering";
Vortrag: Seminar-SoftMatterScience, Freiburg (eingeladen); 13.05.2014.
R. Liska:
"Fundamentals of Frontal (Photo)polymerization";
Vortrag: PolyComp Annual Meeting 2014, Leoben (eingeladen); 19.11.2014.
R. Liska:
"Biokompatible Polymere für den 3D‐Druck";
Vortrag: 8. Forschungs‐ & Technologieforum Mostviertel, Amstetten (eingeladen); 23.09.2014.
Keynote Lecture
R. Liska:
"Advanced Photopolymers for Tissue Engineering";
Hauptvortrag: SummerSchool 2015, Bad Herrenalb (eingeladen); 22.06.2015 - 24.06.2015.
R. Liska:
"Biocompatible Photopolymers for 3D printing";
Hauptvortrag: GDCh Vortrag Hochschule Niederrhein, Niederrhein; 23.04.2015.
J. Torgersen, A. Ovsianikov, V. Mironov, N.U Pucher, X.H. Qin, Z. Li, K. Cicha, T. Machacek, V. Jantsch-Plunger, R. Liska, J. Stampfl:
"High Speed 3D laser micro-fabrication of biocompatible hydrogel scaffolds";
Hauptvortrag: CAIM III Tercier Congreso Argentino die Engereía Mécanica, Buenos Aires (eingeladen); 02.10.2012 - 05.10.2012.
Patent
N. Moszner, I. Lamparth, T. Bock, U. Fischer, U. Salz, V. Rheinberger, R. Liska:
"Dental materials based on monomers having debonding-on-demand properties";
Patent: A2 20130314, Nr. WO 2013034777; eingereicht: 10.09.2012, erteilt: 14.03.2013.
R. Liska, P. Knaack, D. Bomze:
"Photoinitiator for cationic polymerization";
Patent: Österreich, Nr. ?; eingereicht: 02.09.2015.
S. Jauk, A. Liska, S. Knaus, R. Liska, H. Gruber, J. Wendrinsky:
"Oberflächenmodifizierung von Polymeren mit funktionellen Aziden";
Patent: Österreich, Nr. AT 20030157; eingereicht: 01.04.2004.
R. Liska, T. Verdianz, H. Gruber, H. Simbürger:
"Bonding the surface of polyimides to other resins";
Patent: Österreich, Nr. At 500472 A1; eingereicht: 03.09.2003.
R. Liska, B. Seidl, H. Gruber:
"Photopolymerisierbare Mischungen mit Photoinitiatoren auf Basis von Di-inon-Derivaten";
Patent: Österreich, Nr. AT 412 346 (2004); eingereicht: 09.12.2003, erteilt: 04.11.2004.
H. Gruber, S. Knaus, A. Liska, R. Liska, P. Sulek, J. Wendrinsky, P. Sattler:
"Polymers for moldings with good surface metalizabilty";
Patent: Europa, Nr. EP 1443063 A1; eingereicht: 30.01.2004, erteilt: 04.08.2004.
N. Moszner, F. Zeuner, V. Rheinberger, I. Lamparth, U. Fischer, R. Liska:
"Polymerisable compound with multiple germanium atoms containing initiators";
Patent: Eu, Usa, Jp, Nr. EP2103297A1; eingereicht: 20.03.2008, erteilt: 23.09.2009.
R. Liska, X.H. Qin, A. Mautner:
"Thiol-Ene Polymerization with Vinylesters and Vinylcarbonates";
Patent: US, Nr. US patent provisional application number: 61/542,522; eingereicht: 03.09.2011.
R. Liska, F. Schwager, H. Gruber, J. Stampfl:
"Mit Strahlung härtbare wasserlösliche Zusammensetzung und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Österreich, Nr. AT 412 399 (2004); eingereicht: 18.06.2003, erteilt: 15.07.2005.
R. Liska, J. Stampfl, J. Patzer, W. Wachter, C. Appert:
"Vorrichtung und Verfahren zur Verarbeitung von lichtpolymerisierbarem Material zum schichtweisen Aufbau eines Körpers";
Patent: USA, Nr. US 8741203; eingereicht: 20.10.2008, erteilt: 03.06.2014.
N. Moszner, U. Salz, P. Burtscher, R. Liska, A. Gugg, C. Gorsche:
"Polymerizable compositions with improved through-curing depth";
Patent: Ep, Us, Jp, Nr. Ep2455059 (a1); eingereicht: 19.11.2010, erteilt: 23.05.2012.
N. Moszner, K. Rist, I. Lamparth, P. Burtscher, C. Gorsche, R. Liska:
"Dentalmaterialien mit Debonding-on-Demand-Eigenschaften";
Patent: EP, Nr. 2877710; eingereicht: 11.07.2014.
R. Liska, S. Kopeinig, S. Knaus, H. Gruber, E. Hummer-Koppendorfer:
"Methacrylamid-Derivate von Polysiloxanen";
Patent: EU, Nr. Ep 1956038 B1; eingereicht: 06.02.2007, erteilt: 23.09.2009.
R. Liska, S. Jauk, H. Gruber:
"Photopolymerizable mixtures comprising photoinitiators based on benzophenone and phenylglycine";
Patent: Internationales Patent, Nr. WO 2006/108204 A1; eingereicht: 10.04.2006.
R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Österreich, Nr. A1106 / 05; eingereicht: 30.06.2005, erteilt: 15.09.2008.
R. Liska, M. Schuster, H. Gruber, J. Stampfl, F. Varga:
"Mit Strahlung härtbare, biologisch abbaubare Zusammensetzung und deren Verwendung als polymere Stützmaterialien für den Knochenersatz";
Patent: Österreich, Nr. AT 501700; eingereicht: 10.04.2005, erteilt: 15.03.2011.
N. Moszner, I. Lamparth, U. Fischer, K. Rist, P. Burtscher, R. Liska, C. Gorsche, K. Seidler:
"Durch Kettenübertragungspolymerisation härtbare Dentalmaterialien";
Patent: Österreich, Nr. EP15166847; eingereicht: 07.05.2015.
R. Liska, D. Bomze, W. Kern:
"Novel method for curing of epoxy resins";
Patent: Österreich, Nr. ?; eingereicht: 01.09.2015.
J. Stampfl, F. Schwager, R. Liska, S. Seidler, H. Gruber:
"Mit Strahlung härtbare wasserlösliche und/oder schmelzbare Zusammensetzung und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Österreich, Nr. 412.399; eingereicht: 18.06.2003, erteilt: 15.07.2004.
P. Sulek, S. Knaus, R. Liska, A. Liska, H. Gruber, J. Wendrinsky:
"Neue Polymere bzw. gefertigte Gegenstände, Formkörper od. dgl., Verfahren zu deren Herstellung von metallisierten Gegenständen od. dgl. daraus";
Patent: Österreich, Nr. AT 20030124; eingereicht: 31.01.2003.
R. Liska, T. Verdianz, H. Gruber, H. Simbürger:
"Polymers containing imide groups and bearing immobilized catalysts";
Patent: Österreich, Nr. At 500471 A1; eingereicht: 03.09.2003.
H. Gruber, S. Knaus, S. Jauk, A. Liska, R. Liska, J. Wendrinsky:
"Grafting of polymers for coating with metals";
Patent: Europa, Nr. EP 1471084 A2; eingereicht: 31.03.2004, erteilt: 27.10.2004.
P. Radovanovic, J. Matovic, R. Liska, M. Kellner:
"Herstellung asymmetrischer Membranen";
Patent: A, Nr. A824 2011; eingereicht: 01.06.2011.
R. Liska, P. Esfandiari:
"Stable Curable Thiol-Ene Formulation";
Patent: EU, Nr. Appl. No. 11159451.1; eingereicht: 23.03.2011.
J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Rapid-Prototyping-Verfahren und Verwendung in diesem Verfahren einer strahlungshärtbaren Zusammensetzung";
Patent: Europa, USA, Nr. Us 7,815,835 B2 Ep 1 907 192 B1; eingereicht: 29.06.2006, erteilt: 19.10.2010.
N. Moszner, U. Salz, U. Fischer, R. Liska, H. Gruber, B. Ganster:
"Photopolymerizable Polymerizable compositions of binder with acylgermane initiators, preparation of moldings and other uses";
Patent: Eu, Usa, Jp, Nr. Ep 1905415 B1; Us7605190 B2; Jp2008088432; eingereicht: 27.09.2006, erteilt: 01.07.2009.
R. Liska, B. Seidl, H. Gruber:
"Photopolymerisable mixtures with photoinitiators based on di-ynone derivates";
Patent: Internationales Patent, Nr. PCT/AT2005/026840; eingereicht: 01.09.2004, erteilt: 24.03.2005.
R. Liska, J. Stampfl, F. Varga, H. Gruber, S. Baudis, C. Heller, M. Schuster, H. Bergmeister, G. Weigel, C. Dworak:
"Composition that can be cured by polymerization for the production of biodegradable, biocompatible, cross-linkable polymers on the basis of polyvinyl alcohol";
Patent: Eu, Usa, Jp, Ca, Nr. EP2219697; eingereicht: 21.11.2008, erteilt: 28.05.2009.
N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Lichthärtende Schlicker für die stereolithographische Herstellung von Dentalkeramiken";
Patent: Europa, Nr. EP2151214; eingereicht: 30.07.2008, erteilt: 23.01.2013.
N. Moszner, V. Rheinberger, U. Salz, H. Gruber, R. Liska, B. Ganster, G. Ullrich:
"Photopolymerizable dental materials with bisacylphosphine oxides as initiators";
Patent: Eu, Usa, Jp, Nr. Ep 1749513 B1; eingereicht: 06.01.2005, erteilt: 03.04.2009.
N. Moszner, U. Fischer, I. Lamparth, P. Burtscher, R. Liska, C. Gorsche, K. Seidler, P. Gauss:
"Komposite mit gesteuerter Netzwerkstruktur";
Patent: EP, Nr. 2877702; eingereicht: 11.07.2014.
R. Liska, S. Baudis, M. Schuster, C. Heller, F. Varga, J. Stampfl, H. Bergmeister, G. Weigel:
"Zusammensetzungen zur Herstellung biologisch abbaubarer, bioverträglicher, vernetzter Polymere auf Basis von Polyvinylalkohol";
Patent: Österreich, Nr. At A19032007; eingereicht: 30.11.2007.
R. Liska, S. Kopeinig, S. Knaus, H. Gruber, E. Hummer-Koppendorfer:
"Acrylamide mit Initiatoreigenschaften";
Patent: Österreich, EU, Nr. AT 504811 B1, Ep 1956033 B1,; eingereicht: 06.02.2007, erteilt: 15.06.2010.
R. Liska, M. Schuster, J. Stampfl, H. Gruber, F. Varga:
"Photocurable polymer moldings for prostheses";
Patent: Internationales Patent, Nr. Wo 2006108202 A8, US erteilt (US 8,022,155 B2 20.8.2011); eingereicht: 10.04.2006, erteilt: 20.08.2011.
R. Liska, S. Jauk, H. Gruber:
"Photopolymerisierbare Mischungen mit Photoinitiatorenauf Basis von Benzophenon und Phenylglycin";
Patent: Österreich, Nr. AT 501750; eingereicht: 10.04.2005, erteilt: 19.10.2006.
R. Liska, C. Gorsche, K. Seidler, N. Moszner:
"Sulfonsäureester als Regler in radikalischen Polymerisationsreaktionen";
Patent: Österreich, eingereicht: 07.05.2015.
Patent
J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Polymerisierte Formkörper";
Patent: Japan, Nr. 2008-518556; eingereicht: 29.06.2006, erteilt: 11.11.2011.
J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Rapid Prototyping method and radiation-curable composition for use therein";
Patent: USA, Nr. Us 7 815 835 B2; eingereicht: 29.06.2006, erteilt: 29.10.2010.
N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Photo-curable slip for preparing dental ceramic by three dimensional lithography";
Patent: Japan, Nr. JP2010031279 (a); eingereicht: 29.07.2009.
R. Liska, J. Stampfl, F. Varga, H. Gruber, S. Baudis, C. Heller, M. Schuster, H. Bergmeister, G. Weigel, C. Dworak:
"Composition that can be cured by polymerization for the production of biodegradable, biocompatible, cross-linkable polymers on the basis of polyvinyl alcohol";
Patent: WO, Nr. Wo 2009065162 A2; eingereicht: 23.11.2007.
N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Light-curing slips for the stereolithographic preparation of dental ceramics";
Patent: USA, Nr. US 2010-0029801; eingereicht: 27.02.2009.
Habilitationsschrift
R. Liska:
"New concepts in photopolymerization";
Technische Universität Wien / Fakultät für Technische Chemie, 2006.
Scientific Reports
S. Gruber, J. Stampfl, R. Felzmann, S. Springer, R. Liska:
"Lithographiebasierte Fertigung keramischer Bauteile";
Berichts-Nr. ISSN: 1614-0923, 2011.
A. Mautner, R. Liska:
"Herstellung von Probekörpern";
Bericht für Synthes; 2010; 30 S.
A. Gugg, R. Liska:
"Reaktivitäten spezieller Formulierungen";
Bericht für Ivoclar Vivadent; 2010; 35 S.
P. Esfandiari, R. Liska:
"Synthesis of new components I";
Bericht für Huntsman; 2010; 9 S.
A. Mautner, R. Liska:
"Mechanische Eigenschaften";
Bericht für Synthes; 2010; 64 S.
P. Esfandiari, R. Liska:
"Synthesis of new components II";
Bericht für Huntsman; 2010; 12 S.
P. Esfandiari, R. Liska:
"Molecular Weight distribution in Photopolymerizable Formulations";
Bericht für Huntsman; 2009; 11 S.
P. Esfandiari, R. Liska:
"Rheological Investigations of new Formulations";
Bericht für Huntsman; 2009; 13 S.
A. Gugg, R. Liska:
"Molekulargewichtsbestimmung";
Bericht für Ivoclar Vivadent; 2009; 17 S.
A. Mautner, R. Liska:
"Evaluierung unterschiedlicher Polymere";
Bericht für Synthes; 2009; 21 S.
A. Gugg, R. Liska:
"Reaktivitätsmessungen spezieller Formulierungen";
Bericht für Ivoclar Vivadent; 2009; 19 S.
P. Esfandiari, R. Liska:
"Interaction of Additives in Photopolymerizable Formulations";
Bericht für Huntsman; 2009; 13 S.
P. Esfandiari, R. Liska:
"Photo-DSC of new Formulations";
Bericht für Huntsman; 2009; 9 S.
A. Gugg, R. Liska:
"Lagerstabilitätsuntersuchungen für Dentale Füllmaterialien";
Bericht für Ivoclar Vivadent; 2009; 24 S.
A. Gugg, R. Liska:
"Synthese neuer Monomere für Dentale Füllmaterialien";
Bericht für Ivoclar Vivadent; 2009; 20 S.
S. Landertshamer, R. Liska:
"Photoinitiatoren für die Kationische Photopolymerisation von Siliconen";
Bericht für Goldschmidt Evonik; 2008; 14 S.
P. Esfandiari, R. Liska:
"Evaluation of new Formulations";
Bericht für Huntsman; 2008; 20 S.
A. Gugg, R. Liska:
"Neue Konzepte für Dentale Füllmaterialien";
Bericht für Ivoclar Vivadent; 2008; 14 S.
R. Liska:
"Photoinitiatoren mit ß-phenyloger Spaltung - P19769-N14";
Bericht für FWF; 2008; 8 S.
P. Esfandiari, R. Liska:
"Development of monomer formulation for RP";
Bericht für Huntsman; 2008; 14 S.
P. Esfandiari, R. Liska:
"State of the art in Rapid prototyping formulations";
Bericht für Huntsman; 2008; 11 S.
A. Gugg, R. Liska:
"Acylgermaniumverbindungen";
Bericht für Ivoclar Vivadent AG; 2008; 15 S.
R. Liska:
"Bericht für FWF: Photoinitiatoren mit kreuz-konjugiertem System - P18623-N17";
Bericht für FWF; 2008; 8 S.
P. Esfandiari, R. Liska:
"Synthesis of new monomers";
Bericht für Huntsman; 2008; 16 S.
P. Esfandiari, R. Liska:
"Screening of additives for RP";
Bericht für Huntsman; 2008; 7 S.
A. Gugg, R. Liska:
"Acylgermaniumverbindungen II";
Bericht für Ivoclar Vivadent AG; 2008; 16 S.
S. Landertshamer, R. Liska:
"Hydrophobe Komponenten für die Kationische Photopolymerisation von Siliconen";
Bericht für Goldschmidt Evonik; 2008; 17 S.
R. Liska:
"Cross-conjugated Photoinitiators";
Bericht für FWF; Berichts-Nr. FWF (P18623-N17), 2007; 5 S.
R. Liska, B. Ganster:
"Photolysestudien an bathochrom verschobenen Photoinitiatoren";
Bericht für Ivoclar Vivadent; 2007; 15 S.
R. Liska, B. Ganster, A. Gugg:
"Photoinitiatoren auf Basis von Acylgermaniumverbindungen";
Bericht für Ivoclar Vivadent; 2007; 17 S.
R. Liska:
"Photochemie von Diynonen - Zwischenbericht";
Bericht für FWF; Berichts-Nr. FWF (Projekt P18623-N17), 2007; 13 S.
R. Liska, B. Ganster:
"Photoprodukte aus bathochrom verschobenen Photoinitiatoren";
Bericht für Ivoclar Vivadent; 2007; 27 S.
R. Liska, S. Landertshamer:
"Synthese neuer Sensitizer für die kationische Polymerisation";
Bericht für Evonik Goldschmidt; 2007; 19 S.
R. Liska, B. Ganster:
"Photochemie bathochrom verschobener Photoinitiatoren";
Bericht für Ivoclar Vivadent; 2007; 49 S.
R. Liska, S. Kopeinig:
"Modellverbindungen für Polysiloxane";
Bericht für NBG Special Coatings; 2006; 18 S.
C. Haderer, R. Liska, S. Knaus, H. Gruber:
"Immobilisierte Fluoreszenssensoren für die extrakorporale Blutreinigung";
Bericht für Donau Universität, Krems; 2006; 75 S.
R. Liska, S. Kopeinig:
"Equilibrierungsreaktionen in Siliconharzen";
Bericht für NBG Coatings; 2006; 29 S.
R. Liska, M. Höfer:
"Endoperoxide mit singulett Sauerstoff";
Bericht für Ivoclar Vivadent; 2006; 26 S.
R. Liska, B. Ganster:
"Synthese bathochrom verschobener Photoinitiatoren";
Bericht für Ivoclar Vivadent; 2006; 24 S.
R. Liska, B. Ganster:
"Photoinitiatoren mit Absorption im Vis-Bereich";
Bericht für Ivoclar Vivadent; 2006; 25 S.
R. Liska, S. Kopeinig:
"Evaluierung neuer photoreaktiver Gruppen für Siliconharze";
Bericht für Ivoclar Vivadent; 2006; 28 S.
R. Liska, C. Haderer:
"Synthese von Fluoreszenzsensoren";
Bericht für Donauuniversität Krems, Center for Biomedical Technology; 2006; 13 S.
R. Liska, G. Ullrich:
"Prüfung der Lagerstabilität neuer Typ I Initiatoren für die Photopolymerisation";
Bericht für Ivoclar Vivadent; 2005; 12 S.
R. Liska, S. Knaus, H. Gruber:
"Functionalization of PTHF";
Bericht für Elemntis; 2005.
R. Liska, C. Pich:
"Additionsreaktionen an funktionellen Polysiloxanen";
Bericht für NBG Coatings; 2005; 6 S.
R. Liska, C. Haderer:
"Immobilisierte Fluoreszenzsensoren für die extrakorporale Blutreinigung";
Bericht für Donauuniversität Krems, Center for Biomedical Technology; 2005; 22 S.
R. Liska, M. Höfer:
"Reaktionen mit singulett Sauerstoff";
Bericht für Ivoclar Vivadent; 2005; 19 S.
R. Liska, S. Kopeinig:
"Synthese modifizierter Polysiloxane";
Bericht für NBG; 2005; 17 S.
R. Liska, S. Kopeinig:
"Äqulibrierung von Polysiloxanen";
Bericht für NBG; 2005; 13 S.
R. Liska, B. Ganster:
"Photoinitiatoren mit hydrophilen Gruppen";
Bericht für Ivoclar Vivadent; 2005; 15 S.
R. Liska, B. Ganster:
"Lagerstabilitäts- und Reaktivitätsuntersuchungen neuer Typ I Photoinitiatoren";
Bericht für Ivoclar Vivadent; 2005; 12 S.
R. Liska, S. Knaus, H. Gruber:
"Viscosity Measurements";
Bericht für Elementis; 2005.
R. Liska:
"Biophotopolymere für Rapid Prototyping";
Bericht für ISOTEC Projekt Meeting; 2005; 10 S.
R. Liska, S. Kopeinig:
"Neue Photoreaktive Gruppen";
Bericht für NBG Coatings; 2005; 8 S.
R. Liska, B. Ganster:
"Neue Konzepte für bathochrom verschobene Photoinitiatoren";
Bericht für Ivoclar Vivadent; 2005; 29 S.
R. Liska, C. Pich:
"Photoreaktivität von Silkonacrylaten";
Bericht für NBG; 2005; 39 S.
R. Liska, C. Pich:
"Neue Photoinitiatoren für Silkonacrylate";
Bericht für NBG; 2005; 26 S.
R. Liska, G. Ullrich:
"Evaluierung von Photoinitiatoren in wässrigen Primerformulierungen";
Bericht für Ivoclar Vivadent; 2005; 11 S.
R. Liska, C. Pich:
"Analyse von Siliconacrylaten";
Bericht für NBG Coatings; 2004.
R. Liska, G. Ullrich:
"Synthese alpha-spaltender Photoinitiatoren";
Bericht für Ivoclar Vivadent; 2004.
R. Liska, G. Ullrich:
"Synthese und Prüfung neuer Diinone als Photoinitiatoren";
Bericht für Ivoclar Vivadent; 2004.
R. Liska, S. Kopeinig:
"Evaluierung neuer photoreaktiver Gruppen für Siliconharze";
Bericht für NBG Coatings; 2004.
R. Liska, B. Ganster:
"Synthese neuer Typ I Initiatoren für die Photopolymerisation im sichtbaren Lichtbereich";
Bericht für Ivoclar Vivadent; 2004.
R. Liska, G. Ullrich:
"Thiouroniumverbindungen für die Photopolymerisation";
Bericht für Ivoclar Vivadent; 2004.
R. Liska, C. Pich:
"Reduktion der Sauerstoffinhibierung in Siliconacrylaten";
Bericht für NBG Coatings; 2004.
R. Liska, G. Ullrich:
"Synthese und Prüfung modifizierter N-Phenylglycinderivate für die Photopolymerisation";
Bericht für Ivoclar Vivadent; 2003.
R. Liska, G. Ullrich:
"Evaluierung verschiedener Coinitiatoren für Campherchinon in der Photopolymerisation";
Bericht für Ivoclar Vivadent; 2003.
R. Liska, G. Ullrich:
"Photochemisch spaltbare Schutzgruppen für N-Phenylglycine";
Bericht für Ivoclar Vivadent; 2003.
R. Liska, G. Ullrich:
"Aromatische Amine und Phenylglycinderivate als Coinitiatoren für Campherchinon";
Bericht für Ivoclar Vivadent; 2003.
T. Verdianz, R. Liska:
"Grundlegende Untersuchungen zur Oberflächenmodifizierung von Polyimiden";
Bericht für VA TECH; 2003.
D. Herzog, R. Liska:
"Synthese und Prüfung funktioneller Campherchinone";
Bericht für IVOCLAR AG; 2002.
F. Schwager, R. Liska:
"Wasserlösliche Polymere für Rapid Prototyping biometrischer Werkstoffe";
Bericht für Institut für Werkstoffkunde und Materialprüfung - TU Wien; 2002.
G. Ullrich, R. Liska:
"Struktur/Reaktivitätsuntersuchungen an Photoinitiatoren in der Dentaltechnik";
Bericht für IVOCLAR AG; 2002.
T. Verdianz, R. Liska:
"Oberflächenmodifizierung von lackierten Kupferdrähten für verbesserte Härtungs- und Haftungseigenschaften mit der umgebenden Harzmatrix";
Bericht für VA TECH ELIN EBG Motoren; 2002.
Beitrag in CD- oder Web-Tagungsband
N.U Pucher, V. Satzinger, A. Rosspeintner, C. Heller, G. Gescheidt, V. Schmidt, J. Stampfl, R. Liska:
"Novel Highly Potential Initiators for the Two-Photon-Induced Photopolymerization Process";
in: "Mater. Res. Soc. Symp. Proc.", herausgegeben von: Materials Research Society; Material Research Society, Warrendale, PA, USA, 2009, (eingeladen), 6 S.
L. Spoljaric-Lukacic, R. Saf, R. Liska, S. Knaus:
"Free Radical Grafting of Maleimides onto Polyolefins: Studies on Model Compounds";
in: "World Polymer Congress MACRO 2004 - Congress Proceedings", Centre National de la Recherche Scientific, Paris, France, 2004, 2 S.